KTM-MP31181P SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
A B C D E F H I J K L M N O P Q R S T KTM-MP31181P | KTM Prime CONTRAST SENSORS
Ordering information
Type Part no. KTM-MP31181P 1065756 Other models and accessories www.sick.com/KTM_Prime Detailed technical data
Features
Dimensions (W x H x D) 12 mm x 31.5 mm x 21 mm Sensing distance 12.5 mm Sensing distance tolerance ± 3 mm Housing design (light emission) Rectangular Light source LED, White 1) Light spot size Ø 2 mm Light spot direction Vertical 2) Max. web speed 1 m/s 3) Adjustment Teach-in button Teach-in mode 2-point teach-in static/dynamic + proximity to mark Output function Light/dark switching 1) Average service life: 100,000 h at TU = +25 °C. 2) In relation to long side of housing. 3) At a mark size of 4 mm. Mechanics/electronics Supply voltage 12 V DC ... 24 V DC 1) Ripple ≤ 5 Vpp 2) Power consumption < 50 mA 3) Switching frequency 15 kHz 4) Response time 32 µs 5) 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) At supply voltage > 24 V, Imax = 30 mA. Imax is consumption count of all Qn.
2 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
KTM-MP31181P | KTM Prime CONTRAST SENSORS Jitter 15 µs Switching output PNP Switching output (voltage) PNP: HIGH = VS– ≤ 2 V / LOW approx. 0 V Switching output Light/dark switching Output current Imax. 50 mA 6) Input, dynamic teach-in (ET) PNP: Teach: U = 10,8 V ... < UV Run: U < 2 V or open Retention time (ET) 28 ms, non-volatile memory Connection type Male connector M8, 4-pin Protection class III Circuit protection UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression Enclosure rating IP67 Weight 20 g Housing material ABS 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) At supply voltage > 24 V, Imax = 30 mA. Imax is consumption count of all Qn. Ambient data Ambient operating temperature –10 °C ... +55 °C Ambient storage temperature –20 °C ... +75 °C Shock load According to IEC 60068 UL File No. NRKH.E348498 & NRKH7.E348498 Classifications ECl@ss 5.0 27270906 ECl@ss 5.1.4 27270906 ECl@ss 6.0 27270906 ECl@ss 6.2 27270906 ECl@ss 7.0 27270906 ECl@ss 8.0 27270906 ECl@ss 8.1 27270906 ECl@ss 9.0 27270906 ETIM 5.0 EC001820 ETIM 6.0 EC001820 UNSPSC 16.0901 39121528 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T KTM-MP31181P | KTM Prime CONTRAST SENSORS Dimensional drawing (Dimensions in mm (inch)) KTM Prime (0.35)9.7 (0.38) (0.83) 11.4 (0.45) 31.5 (1.24) 28.5 (1.12) 25.4 (1.00) 0.5 (0.02) 0.5 (0.02) 9.7 (0.38) (0.12) 18.3 (0.72) 305 (12.01) 9.9 (0.39) 0.9 (0.04) /c49 /c50 /c51 /c51 /c52 ① Optical axis receiver ② Optical axis sender ③ M3 mounting hole ④ Cable with male connector M12 (only KTM-xxxxx2x) Adjustments KTM Prime /c51 /c49 /c50 ① Status indicator LED, yellow: Status switching output Q (dark switching) ② LED indicator green: Supply voltage active ③ Teach-in button Connection diagram cd-092 + (L+) Teach - (M) BN WH BU QBK 4
4 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
KTM-MP31181P | KTM Prime CONTRAST SENSORS Concept of operation Teach-in dynamic Press the teach-in button and keep it pressed. LED flashing slowly. 1. Position background Keep the teach-in button > 3 < 30 s pressed. 2. Move at least the mark and background using the light spot. Release the teach-in button. Yellow LED will illuminate, when emitted light is on the mark. Switching characteristics The optimum emitted light is selected automatically (at RGB variants). Static teach-in: light/dark setting is defined using teach-in sequence. Dynamic teach-in: switching output active on mark, if background is longer in the field of view during the teach-in. The switching threshold is set in the center between the background and the mark. If the button is pressed again within 10 s of the teach (> 20 ms < 10 s), the relative switching threshold is placed 75 % between mark (100 %) and background (0 %) (dotted line in Figure). Teach-in can also be performed using an external control signal. Keylock activation and deactivation: hold down teach-in button > 30 s. Teach-in failure: yellow LED indicator and the transmitted light of the sensor flashing quickly. For dynamic teach-in with ET signal (5 Hz) via switching output Q. Dark switching Light switching Output Q Output Q Example Internal signal received Switching threshold Switching threshold Internal signal received 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T KTM-MP31181P | KTM Prime CONTRAST SENSORS Teach-in static Press and hold teach-in button > 1 < 3 s. Yellow LED flashes slowly. 1. Position mark Press and hold teach-in button < 3 s. Yellow LED goes out. 2. Position background Characteristic curve Sensing distance Relative sensitivity in % (0.20) 0 10 (0.39) (0.59) (0.79) 100 110 Sensing distance in mm (inch) Recommended accessories Other models and accessories www.sick.com/KTM_Prime Brief description Type Part no. Device protection (mechanical) Stainless steel 1.4301 (SVS 304), 3 mm thick protective sleeve for G6, stainless steel 1.4301, mounting hardware included BEF-SG-G6-01 2069044
6 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
KTM-MP31181P | KTM Prime CONTRAST SENSORS Brief description Type Part no. Mounting brackets and plates Mounting bracket for wall mounting, stainless steel, mounting hardware included BEF-W100-A 5311520 Mounting bracket for floor mounting, steel, zinc coated, mounting hardware included BEF-W100-B 5311521 Adapter plate KT3 to KTM, steel, zinc coated, fastening screws included BEF-AP-KTMS01 2068786 Plug connectors and cables Head A: female connector, M8, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 5 m YF8U14-050VA3XLEAX 2095889 Head A: female connector, M8, 4-pin, straight, A-coded Head B: male connector, M12, 4-pin, straight, A-coded Cable: Sensor/actuator cable, PVC, unshielded, 0.6 m YF8U14- C60VA3M2A14 2096607 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 7
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and eficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer speciications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations □ www.sick.com