WL2SGC-2P3234A00 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
A B C D E F H I J K L M N O P Q R S T WL2SGC-2P3234A00 | W2SG-2 PHOTOELECTRIC SENSORS Illustration may differ
Ordering information
Type Part no. WL2SGC-2P3234A00 1063648 Other models and accessories www.sick.com/W2SG-2 Detailed technical data
Features
Sensor/detection principle Photoelectric retro-reflective sensor, autocollimation Dimensions (W x H x D) 7.7 mm x 21.8 mm x 13.5 mm Housing design (light emission) Rectangular Sensing range 0 m ... 0.55 m 1) Type of light Visible red light Light source PinPoint LED 2) Light spot size (distance) Ø 12 mm (250 mm) Wave length 640 nm Adjustment IO-Link Pin 2 configuration External input, Teach-in input, Sender off input, Detection output, logic output, alarm output quality of run Diagnosis Quality of run, Quality of teach-in AutoAdapt ✔ Special features Detecting transparent objects 1) Reflector P250F. 2) Average service life: 100,000 h at TU = +25 °C.
2 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-07-10 17:15:08
Subject to change without notice
WL2SGC-2P3234A00 | W2SG-2 PHOTOELECTRIC SENSORS Smart Task Smart Task name Base logics Logic function Direct AND OR WINDOW Hysteresis Timer function Deactivated On delay Off delay ON and OFF delay Impulse (one shot) Inverter Yes Switching frequency SIO Direct: 1000 Hz SIO Logic: 1000 Hz IOL: 900 Hz Response time SIO Direct: 300 µs ... 450 µs 1) SIO Logic: 500 µs ... 600 µs 2) IOL: 500 µs ... 900 µs 3) Repeat accuracy SIO Direct: 150 µs 1) SIO Logic: 150 µs 2) IOL: 400 µs 3) Switching signal QL1 Switching output Switching signal QL2 Switching output 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/“deac- tivated”). 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used. 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters. Communication interface Communication interface IO-Link V1.1 Mode COM2 (38,4 kBaud) Process data length 16 Bit Process data structure Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 ... 15 = empty Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 5 Vpp 2) Power consumption ≤ 20 mA 3) 1) Limit values. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) Signal transit time with resistive load. 5) Valid for Q \\ on Pin2, if configured with software. 6) With light/dark ratio 1:1. 7) Do not bend below 0 °C. 8) A = VS connections reverse-polarity protected. 9) B = output reverse-polarity protected. 10) D = outputs overcurrent and short-circuit protected. 2017-07-10 17:15:08 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T WL2SGC-2P3234A00 | W2SG-2 PHOTOELECTRIC SENSORS Output type PNP Switching mode Light/dark switching Output current Imax. < 50 mA Response time < 0.5 ms 4) Response time Q/ on Pin 2 300 µs ... 450 µs 4) 5) Switching frequency 1,000 Hz Switching frequency Q / to pin 2 1,000 Hz 5) 6) Connection type Cable with M8 male connector, 4-pin, 200 mm 7) Cable material PVC Cable diameter Ø 3 mm Circuit protection A 8) B 9) D 10) Protection class III Polarisation filter ✔ IO-Link ✔ Transmission rate COM2 Housing material Plastic, ABS/PC, Plastic, PMMA Optics material Plastic, PMMA Enclosure rating IP67 Special feature Detecting transparent objects Ambient operating temperature –20 °C ... +50 °C Ambient storage temperature –40 °C ... +75 °C UL File No. NRKH.E181493 Repeatability Q/ on Pin 2: 150 µs 1) Limit values. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) Signal transit time with resistive load. 5) Valid for Q \\ on Pin2, if configured with software. 6) With light/dark ratio 1:1. 7) Do not bend below 0 °C. 8) A = VS connections reverse-polarity protected. 9) B = output reverse-polarity protected. 10) D = outputs overcurrent and short-circuit protected. Classifications ECl@ss 5.0 27270902 ECl@ss 5.1.4 27270902 ECl@ss 6.0 27270902 ECl@ss 6.2 27270902 ECl@ss 7.0 27270902 ECl@ss 8.0 27270902 ECl@ss 8.1 27270902
4 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-07-10 17:15:08
Subject to change without notice
WL2SGC-2P3234A00 | W2SG-2 PHOTOELECTRIC SENSORS ECl@ss 9.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 UNSPSC 16.0901 39121528 Connection diagram Cd-367 1 + (L+) QL1 /C MF – (M) brn blk wht blu Characteristic curve WL2S-2 100 500 (19.69) mm (inch) 1,000 (39.37) 1,500 (59.06) Sensing range Distance in mm (inch) Sensing range max. ① Reflector P250F ② Reflector PL20F ③ Reflective tape REF-AC1000 ④ PL10F reflector ⑤ Reflector PL8FH 2017-07-10 17:15:08 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T WL2SGC-2P3234A00 | W2SG-2 PHOTOELECTRIC SENSORS Light spot size WL2S-2 –40 –30 –20 –10 800 (31.50) 1,000 (39.37) 1,200 (47.24) 400 (15.75) Sensing range in mm (inch) Spot diameter in mm (inch) 200 (7.87) 600 (23.62) Dimensions in mm (inch) Spot diameter 3.4 (0.13) 6.5 (0.26) 12.0 (0.47) 34.0 (1.34) 48.0 (1.89) 60.0 (2.36) Sensing range (0.79) 100 (3.94) 250 (9.84) 500 (19.69) 1,000 (39.37) 1,200 (47.24) Sensing range diagram WL2S-2 0 550 1,200 0 750 1,000 0 400 750 600 0 300 /c52 /c51 /c50 /c49 Distance in mm (inch) Sensing range Sensing range max. 500 (19.69) 1,000 (39.37) 1,500 (59.06) 2500 150/c53 ① Reflector P250F ② Reflector PL20F ③ Reflective tape REF-AC1000 ④ PL10F reflector ⑤ Reflector PL8FH
6 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-07-10 17:15:08
Subject to change without notice
WL2SGC-2P3234A00 | W2SG-2 PHOTOELECTRIC SENSORS Dimensional drawing (Dimensions in mm (inch)) WL2S-2 Ø 3 (0.13) 6.8 (0.27) 18.9 (0.74) 15 (0.59) 13.5 (0.53) 10.8 (0.43) 21.8 (0.86) 26.8 (1.06) 7.7 (0.30) 3 3 M8 x 1 max. 41.5 (1.63) ① Optical axis, receiver ② Optical axis, sender ③ Middle axis fixing hole Ø 3.2 mm ④ LED indicator green: Supply voltage active ⑤ LED indicator yellow: Status of received light beam ⑥ Connection Recommended accessories Other models and accessories www.sick.com/W2SG-2 Brief description Type Part no. Mounting brackets and plates Mounting bracket for floor mounting, steel, zinc coated, without mounting hardware BEF-W2S-A 4034748 Mounting bracket for wall mounting, steel, zinc coated, without mounting hardware BEF-W2S-B 4034749 Terminal and alignment brackets Ball clamp bracket, Plastic, mounting hardware included BEF-GH-MINI01 2023160 Modules and gateways IO-Link version V1.1, Port class 2, PIN 2, 4, 5 galvanically connected, Supply voltage 18 V DC ... 32 V DC (limit values, operation in short-circuit protected network max. 8 A) IOLP2ZZ-M3201 (SICK Memory Stick) 1064290 IO-Link V1.1 Class A port, USB2.0 port, optional external power supply 24V / 1A IOLA2US-01101 (SiLink2 Master) 1061790 2017-07-10 17:15:08 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 7
A B C D E F H I J K L M N O P Q R S T WL2SGC-2P3234A00 | W2SG-2 PHOTOELECTRIC SENSORS Brief description Type Part no. EtherCAT IO-Link Master, IO-Link V1.1, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12 cable IOLG2EC-03208R01 (IO-Link Master) 6053254 EtherNet/IP IO-Link Master, IO-Link V1.1, power supply via 7/8'' cable 24 V / 8 A, field- bus connection via M12-cable IOLG2EI-03208R01 (IO-Link Master) 6053255 PROFINET IO-Link Master, IO-Link V1.1, Class A port, power supply via 7/8'' cable 24 V /
8 A, fieldbus connection via M12 cable
(IO-Link Master) 6053253 Plug connectors and cables Head A: female connector, M8, 4-pin, straight Head B: cable Cable: PVC, unshielded, 2 m DOL-0804-G02M 6009870 Head A: female connector, M8, 4-pin, straight Head B: cable Cable: PVC, unshielded, 5 m DOL-0804-G05M 6009872 Head A: female connector, M8, 4-pin, angled Head B: cable Cable: PVC, unshielded, 2 m DOL-0804-W02M 6009871 Head A: female connector, M8, 4-pin, angled Head B: cable Cable: PVC, unshielded, 5 m DOL-0804-W05M 6009873 Reflectors Rectangular, screw connection, 80 mm x 80 mm, PMMA/ABS, Screw-on, 2 hole mount- ing PL80A 1003865 Fine triple reflector, screw connection, suitable for laser sensors, 47 mm x 47 mm, PM- MA/ABS, Screw-on, 2 hole mounting P250F 5308843 Fine triple reflector, screw connection, suitable for laser sensors, 18 mm x 18 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL10F 5311210 Fine triple reflector, screw connection, suitable for laser sensors, 38 mm x 16 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL20F 5308844 Fine triple reflector, screw connection, suitable for laser sensors, 56 mm x 28 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL30F 5326523 Fine triple reflector, screw connection, suitable for laser sensors, 76 mm x 45 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL81-1F 5325060 Fine triple, not self-adhesive, high temperature up to 99°C, ø 10 mm, ø Reflexionsfläche 8 mm, PMMA/ABS PL8FH 5328583 Suitable for laser sensors, self-adhesive, cut, see alignment note, 56.3 mm x 56.3 mm, self-adhesive REF-AC1000-56 4063030 Fine triple reflector, chemically resistant, screw connection, 18 mm x 18 mm, Plastic, Screw-on, 2 hole mounting PL10F CHEM 5321636
8 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-07-10 17:15:08
Subject to change without notice
WL2SGC-2P3234A00 | W2SG-2 PHOTOELECTRIC SENSORS Brief description Type Part no. Chemically resistant, screw connection, suitable for laser sensors, 16 mm x 38 mm, Plastic, Screw-on, 2 hole mounting PL20F-CHEM 5326089 Stainless steel reflector, hygienic design, chemically resistant, enclosure rating IP69K, D12 adapter shaft, 25 mm x 25 mm, Stainless steel V4A (1.4404, 316L), D12-adapter shaft PLH25-D12 2063404 Stainless steel reflector, hygienic design, chemically resistant, Enclosure rating IP 69K, M12-adapter thread, 25 mm x 25 mm, Stainless steel V4A (1.4404, 316L), M12- adapter thread PLH25-M12 2063403 Stainless steel reflector, washdown design, chemically resistant, IP 69K enclosure rat- ing, screw connection, 14 mm x 14 mm, Stainless steel V4A (1.4404, 316L), Screw-on, 2 hole mounting PLV14-A 2063405 2017-07-10 17:15:08 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 9
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com