KTM-WP1A7A2V SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
A B C D E F H I J K L M N O P Q R S T KTM-WP1A7A2V | KTM Prime CONTRAST SENSORS
Ordering information
Type Part no. KTM-WP1A7A2V 1062147 Other models and accessories www.sick.com/KTM_Prime Detailed technical data
Features
Dimensions (W x H x D) 15.25 mm x 48.6 mm x 22.2 mm Sensing distance 11 mm Sensing distance tolerance ± 3 mm Housing design (light emission) Rectangular Light source LED, RGB 1) Wave length 470 nm, 525 nm, 625 nm Light spot size 1.5 mm x 6.5 mm Light spot direction Vertical 2) Max. web speed 1 m/s 3) Adjustment Teach-in button Teach-in mode 2-point teach-in static/dynamic + proximity to mark Output function Light/dark switching 1) Average service life: 100,000 h at TU = +25 °C. 2) In relation to long side of housing. 3) At a mark size of 4 mm. Mechanics/electronics Supply voltage 12 V DC ... 24 V DC 1) 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) At supply voltage > 24 V, Imax = 30 mA. Imax is consumption count of all Qn.
2 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
KTM-WP1A7A2V | KTM Prime CONTRAST SENSORS Ripple ≤ 5 Vpp 2) Power consumption < 50 mA 3) Switching frequency 15 kHz 4) Response time 35 µs 5) Jitter 15 µs Switching output PNP Switching output (voltage) PNP: HIGH = VS– ≤ 2 V / LOW approx. 0 V Switching output Light/dark switching Output current Imax. 50 mA 6) Input, static teach-in (ET) PNP: Teach: U = 10,8 V ... < UV Run: U < 2 V or open Retention time (ET) 28 ms, non-volatile memory Connection type Cable with M12 male connector, 4-pin, 0.2 m Protection class III Circuit protection UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression Enclosure rating IP67 IP69K IP67, IP69K Weight 40 g Housing material Stainless steel 316L 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) At supply voltage > 24 V, Imax = 30 mA. Imax is consumption count of all Qn. Ambient data Ambient operating temperature –30 °C ... +70 °C 1) –30 °C ... +60 °C Ambient storage temperature –30 °C ... +75 °C Shock load According to IEC 60068 UL File No. NRKH.E348498 1) At UV ≤ 24 V and IA < 30 mA. Classifications ECl@ss 5.0 27270906 ECl@ss 5.1.4 27270906 ECl@ss 6.0 27270906 ECl@ss 6.2 27270906 ECl@ss 7.0 27270906 ECl@ss 8.0 27270906 ECl@ss 8.1 27270906 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T KTM-WP1A7A2V | KTM Prime CONTRAST SENSORS ECl@ss 9.0 27270906 ETIM 5.0 EC001820 ETIM 6.0 EC001820 UNSPSC 16.0901 39121528 Communication interface Communication interface IO-Link V1.1 Communication Interface detail COM2 (38,4 kBaud) Cycle time 2.3 ms Process data length 16 Bit Process data structure A Bit 0 = switching signal QL1 Bit 1 ... 3 = Emission Color Bit 3 … 12 = Measurment Value RGB Bit 13 … 15 = empty Process data structure B Bit 0 = switching signal QL1 Bit 1 … 10 = Measurment Value Emission Color Bit 11 … 15 = empty Process data structure C Bit 0 = switching signal QL1 Bit 1 = Quality of Run Alarm Bit 2 = Teach successful Bit 3 = Teach busy Bit 4 ... 15 = empty Dimensional drawing (Dimensions in mm (inch)) KTM Prime Inox 16.4 (.65) 6.4 (.25) Ø 11 (.43) Ø 3.4 (.13) Ø 16 (.63) 0.4 (.02) 3.5 (.14) 15 (.59) 22.2 (.87) 7.5 (.3) 37.9 (1.49) 32.7 (1.29) ① M3 mounting hole ② Optical axis receiver ③ Optical axis sender
4 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
KTM-WP1A7A2V | KTM Prime CONTRAST SENSORS Adjustments KTM Prime Inox 1 2 ① Status indicator LED, yellow: Status switching output Q ② LED indicator green: Supply voltage active ③ Teach-in button Connection diagram cd-309 + (L+) - (M) Q/C4 WH BU BN BK Q 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T KTM-WP1A7A2V | KTM Prime CONTRAST SENSORS Concept of operation Teach-in dynamic Press the teach-in button and keep it pressed. LED flashing slowly. 1. Position background Keep the teach-in button > 3 < 30 s pressed. 2. Move at least the mark and background using the light spot. Release the teach-in button. Yellow LED will illuminate, when emitted light is on the mark. Switching characteristics The optimum emitted light is selected automatically (at RGB variants). Static teach-in: light/dark setting is defined using teach-in sequence. Dynamic teach-in: switching output active on mark, if background is longer in the field of view during the teach-in. The switching threshold is set in the center between the background and the mark. If the button is pressed again within 10 s of the teach (> 20 ms < 10 s), the relative switching threshold is placed 75 % between mark (100 %) and background (0 %) (dotted line in Figure). Teach-in can also be performed using an external control signal. Keylock activation and deactivation: hold down teach-in button > 30 s. Teach-in failure: yellow LED indicator and the transmitted light of the sensor flashing quickly. For dynamic teach-in with ET signal (5 Hz) via switching output Q. Dark switching Light switching Output Q Output Q Example Internal signal received Switching threshold Switching threshold Internal signal received
6 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
KTM-WP1A7A2V | KTM Prime CONTRAST SENSORS Teach-in static Press and hold teach-in button > 1 < 3 s. Yellow LED flashes slowly. 1. Position mark Press and hold teach-in button < 3 s. Yellow LED goes out. 2. Position background Characteristic curve Sensing distance Relative sensitivity in % (0.20) 0 10 (0.39) (0.59) (0.79) 100 110 Sensing distance in mm (inch) Recommended accessories Other models and accessories www.sick.com/KTM_Prime Brief description Type Part no. Device protection (mechanical) Stainless steel 1.4301 (SVS 304), 3 mm thick protective sleeve for G6, stainless steel 1.4301, mounting hardware included BEF-SG-G6-01 2069044 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 7
A B C D E F H I J K L M N O P Q R S T KTM-WP1A7A2V | KTM Prime CONTRAST SENSORS Brief description Type Part no. Mounting brackets and plates Mounting bracket for wall mounting, stainless steel, mounting hardware included BEF-W100-A 5311520 Mounting bracket for floor mounting, steel, zinc coated, mounting hardware included BEF-W100-B 5311521 Adapter plate KT3 to KTM, steel, zinc coated, fastening screws included BEF-AP-KTMS01 2068786 Plug connectors and cables Head A: female connector, M12, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 5 m YF2A14-050VB3XLEAX 2096235
8 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and eficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer speciications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations □ www.sick.com