105U-G-DE1-150-5W COOPER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • 150/220/400/869 MHz, 5 mW–5W, 3.6–19.2 kbps radio communications to 35 miles (55 km) with multi-hop repeating
  • Able to connect to similar and dissimilar industrial protocols and vendor devices: master/slave, slave/slave, master/master networks
  • Flexible and secure networking, point to multipoint communications with forward error correction (FEC), data integrity check (CRC) and data encryption
  • Eight configurable digital onboard I/O with I/O expansion via the ELPRO 115S series products
  • AC/DC/battery power options with UPS battery charger
  • Module diagnostics including read/write of register I/O, reporting of received signal strength indication (RSSI), communications logging and internal measurement of low/normal and battery supply voltages

Applications

  • Data bus SCADA/DCS to PLC-PLC communications
  • Moving machinery PLC-PLC/HMI connection/operation
  • Data bus cable replacement
  • Smart instrument interface and connection (for example, gas analyzer)
  • Multi-I/O data concentrator/repeater for large networks Technical Data TD032007EN Effective January 2014

eaton www.eaton.com Specifications SPECIFICATION DESCRIPTION Transmitter and Receiver Frequency a 148–174 MHz 200–235 MHz 360–512 MHz

869.525 MHz

869.875 MHz

a 148–174 MHz, 0.1–5W 220–235 MHz, 0.1–5W 360–512 MHz, 10 mW–5W

869.525 MHz, 500 mW

869.875 MHz, 5 mW

Transmission Frequency modulation (FM) Modulation Digital frequency shift key (DFSK) Receiver sensitivity 148–512 MHz: –114 dBm 869.525 MHz, 869.875 MHz: –106 dBm Channel spacing 148–512 MHz: 12.5 kHz 869.525 MHz, 869.875 MHz: 250 kHz Data rate 400 MHz: 3.6 kbps 869.525 MHz, 869.875 MHz: 19.2 kbps, forward-error correction Range (LoS) b 150/220/400 MHz: 10 mW EIRP to 1.2 miles (2 km), 500 mW EIRP to 6.2 miles (10 km), 5W EIRP to 34 miles (55 km) 869.525 MHz: 3.1 miles (5 km) 500 mW 869.875 MHz: 0.6 miles (1 km) 5 mW Antenna connector 148–512 MHz: BNC female coaxial 869.525, 869.875 MHz: SMA female coaxial internal gas discharger arrestor protection Input/Output Discrete I/O c 8 input voltage-free/NPN, wetting current 0.5 mA; 8 output FET

30 Vdc/500 mA

Ethernet port 10/100Base-T; RJ45 connector (IEEE 802.3) Link activity Link, 100Base-T via LED Serial settings 7/8 data bits; no parity, 1 stop bit Serial Port RS-232 9-pin DB9 female connector RS-485 2-pin terminal block, non-isolated to 4000' (1200 m) Data rate (bps) 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400 Serial settings 7/8 data bits; stop/start/parity (configurable) Protocols and Configuration System address Configurable system address Protocols supported: 105U-G-MD1 Modbus RTU (master/slave), DF1 up to 4300 I/O points: analog and/or discrete Modbus, RS-232/RS-485, 300–38400 bps DF1 (full duplex), RS-232, 300–38400 bps 105U-G-ET1 EtherNet/IP (Level 2 I/O server) Modbus/TCP (Class 0, 1, partially Class 2 slave) TCP/IP functions; embedded web system (dynamic HTTP); onboard file system for downloadable web pages via FTP server; email (SMTP) 2048 bytes input/2048 bytes output; up to 4300 DIO or 1024 AI/1024 AO; 10/100 Mbps, RJ-45 connector 105U-G-PR1 Profibus DP slave to EN 50170 standard; 416 I/O bytes (up to

1952 DI/1952 DO or 122 AI/122 AO)

RS-485 optically isolated with onboard DC/DC converter, auto- matic baud rate detection: 9600 bps–12 Mbps 105U-G-PR2 Profibus DP master to EN 50170 standard; 2048 bytes input/ 2048 bytes output (up to 4300 DIO or 1024 AI/1024 AO) RS-485 optically isolated with onboard DC/DC converter, automatic baud rate detection: 9600 bps–12 Mbps SPECIFICATION DESCRIPTION 105U-G-DE1 DeviceNet slave 512 bytes input/512 bytes output (up to 4300 DIO or 256 AI/256 AO) 16-bit register size; up to 500 remote addresses RS-422 optically isolated (selectable 125/250/500 kbps baud rate) 105U-G-M+1 Modbus plus slave Global database transactions: routing up to six networks 2048 bytes input/2048 bytes output; up to 4300 DIO or

1024 AI/1024 AO

RS-485 optically isolated; standard baud rate of 1 Mbps User configuration E-Series configuration utility Configurable parameters Individual I/O mappings, update time, databus mappings, protocol settings Security 64-bit encryption on radio and serial LED Indicators and Diagnostics LED indication Active, OK, serial TX and RX, radio TX and RX, I/O LED status Refer to product manual for more information. Reported diagnostics RSSI, communications logging, I/O status, battery voltage Power Supply Nominal supply 12–24 Vac/15–30 Vdc: over-voltage/reverse power protected Average current draw 105U-G-MD1: 150 mA @ 12V; 90 mA @ 24V; add 5 mA per I/O 105U-G-ET1/PR1/PR2/DE1/M+1: 270 mA @ 12V; 170 mA @ 24V; add 5 mA per I/O Transmit current draw 450 mA @ 13.8 Vdc (0.5W) 600 mA @ 13.8 Vdc (1W) 800 mA @ 13.8 Vdc (2W) 1.25A @ 13.8 Vdc (5W) Battery supply 11.5–15.0 Vdc (battery supply volts, internal I/O value) Battery charging circuit Suitable for 12 Vdc sealed lead acid batteries, max. charge current 2.0A (5W), 0.9A (500 mW) Compliance EMC CE, FCC Part 15, AS3548, EN 301 489 RF (radio) EN 300 220, EN 300 113, FCC Part 90, RSS-119, AS4295, AS4768.1 Hazardous area UL Class I, Division 2 Safety EN 60950 General Size 5.1" x 7.3" x 2.4" (130 mm x 185 mm x 60 mm) Housing Extruded aluminum Mounting DIN rail Terminal blocks Removable; max conductor 14 AWG (2.5 mm Temperature rating 105U-G-MD1, 150/220/400 MHz: –22 to +140°F (–30 to +60°C) 105U-G-MD1, 869 MHz: –40 to +140°F (–40 to +60°C) 105U-G-ET1/PR1/PR2/DE1/M+1: –32 to +140°F (0 to +60°C) Humidity rating 105U-G-MD1: RH noncondensing 0–99% 105U-G-ET1/PR1/PR2/DE1/M+1: RH noncondensing 0–95% Weight 1 kg (2.2 lbs) Note:N Specifications are subject to change. a Specify RF power and frequency at time of order. b Typical maximum LoS sight range (single hop, repeaters will extend) c Configurable as inputs/outputs

eaton www.eaton.com Ordering PRODUCT CODE DESCRIPTION FREQUENCY RF POWER Industrial Protocol–DeviceNet Slave 105U-G-DE1-150–5W Gateway, DeviceNet slave 148–174 MHz b 0.1–5W 105U-G-DE1-220–5W Gateway, DeviceNet slave 220–235 MHz b 0.1–5W 105U-G-DE1-xxx–5W a Gateway, DeviceNet slave 360–512 MHz b 0.5–5W 105U-G-DE1-xxx–500M a Gateway, DeviceNet slave 360-512 MHz b 10–500 mW 105U-G-DE1-868–500M Gateway, DeviceNet slave

869.525 MHz 500 mW

105U-G-DE1-868–5M Gateway, DeviceNet slave

869.875 MHz 5 mW

Industrial Protocol–Ethernet/IP , Modbus TCP 105U-G-ET1-150–5W Gateway, Ethernet/IP 148-174 MHz b 0.1–5W 105U-G-ET1-220–5W Gateway, Ethernet/IP 220-235 MHz b 0.1–5W 105U-G-ET1-xxx–5W a Gateway, Ethernet/IP 360-512 MHz b 0.5–5W 105U-G-ET1-xxx–500M a Gateway, Ethernet/IP 360-512 MHz b 10–500 mW 105U-G-ET1-868–500M Gateway, Ethernet/IP 869.525 MHz 500 mW 105U-G-ET1-868–5M Gateway, Ethernet/IP 869.875 MHz 5 mW Industrial Protocol–Modbus plus Slave 105U-G-M+1-150–5W Gateway, Modbus plus slave 148-174 MHz b 0.1–5W 105U-G-M+1-220–5W Gateway, Modbus plus slave 220-235 MHz b 0.1–5W 105U-G-M+1-xxx–5W a Gateway, Modbus plus slave 360-512 MHz b 0.5–5W 105U-G-M+1-xxx–500M a Gateway, Modbus plus slave 360-512 MHz b 10–500 mW 105U-G-M+1-868–500M Gateway, Modbus plus slave 105U-G-M+1-868–5M Gateway, Modbus plus slave Industrial Protocol–Modbus RTU/DF1 105U-G-MD1-150–5W Gateway, Modbus RTU/DF1 148-174 MHz b 0.1–5W 105U-G-MD1-220–5W Gateway, Modbus RTU/DF1 220-235 MHz b 0.1–5W 105U-G-MD1-xxx–5W a Gateway, Modbus RTU/DF1 360-512 MHz b 0.5–5W 105U-G-MD1-xxx-500M a Gateway, Modbus RTU/DF1 360-512 MHz b 10–500 mW 105U-G-MD1-868–500M Gateway, Modbus RTU/DF1 105U-G-MD1-868–5M Gateway, Modbus RTU/DF1 Industrial Protocol–Profibus Master/Slave 105U-G-PRx-150–5W c Gateway, Profibus 148-174 MHz b 0.1–5W 105U-G-PRx-220–5W c Gateway, Profibus 220-235 MHz b 0.1–5W 105U-G-PRx-xxx–5W a c Gateway, Profibus 360-512 MHz b 0.5–5W 105U-G-PRx-xxx–500M a c Gateway, Profibus 360-512 MHz b 10–500 mW 105U-G-PRx-868–500M c Gateway, Profibus 869.525 MHz 500 mW 105U-G-PRx-868–5M c Gateway, Profibus 869.875 MHz 5 mW Note:N Available RF power and frequency may vary depending on country of application. a xxx represents frequency band (370, 390, 410, 430, 440, 460, 480, 500) b Typically licensed. Specify TX/RX frequencies. c x is 1 for Profibus slave or 2 for Profibus master Accessories PRODUCT CODE DESCRIPTION DATA SHEET Antennas 148–174 MHz UDP150-5 Dipole antenna, BNC male, 0 dBi gain, 5m (16’) coaxial cable TD032065EN Antennas 220–235 MHz UDP200-C Dipole antenna, N-type female, 0 dBi gain TD032066EN Antennas 360–512 MHz UDP400-C Dipole antenna, BNC male, 0 dBi gain, 3m (9’) coaxial cable TD032037EN UDP400-3 Dipole antenna, N-type female, 0 dBi gain, 3m (9’) coaxial cable TD032037EN YU3-400 Yagi antenna, 3-element, N-type, 10 dBi gain TD032040EN YU6-400 Yagi antenna, 6-element, N-type, 9 dBi gain TD032041EN YU16-400 Yagi antenna, 16-element, N-type female, 15 dBi gain TD032044EN BU3-400 400 MHZ colinear antenna, N-type female, 5 dBi gain TD032038EN BU6-400 400 MHZ colinear antenna, N-type female, 8 dBi gain TD032039EN Antennas 869 MHz CFD890EL Dipole antenna, SMA, 2 dBi, 5m (16’) RG-58, bracket TD032048EN SG900EL Colinear antenna, N-type female, 5 dBi gain TD032049EN SG900-6 Colinear antenna, N-type female, 8 dBi gai TD032050EN DG800-5 Whip antenna, SMA male, –2 dBi gain, 5m (16’) RG-174, bracket TD032046EN YU6-870 Yagi antenna, 6-element, N-type, 9 dBi gain TD032042EN Cables CC3/10/20-SMA/BNC Coaxial cable kit, 9.8' (3m)/32' (10m)/65' (20m), N-type to N-type/SMA male/BNC male TD032019EN TD032020EN TD032021EN CCTAIL-SMA-F/M Coaxial cable tail, 24" (600 mm), SMA to N-type female or male TD032023EN CCTAIL-BNC-F/M Coaxial cable tail, 24” (600 mm), SMA to N-type female or male TD032022EN SER-DB9 Serial RS-232 cable, DB9 male to DB9 female, straight through TD032026EN Surge Diverters CSD-SMA-2500 SMA surge diverter for use with CC10/CC20–SMA TD032030EN CSD-N-6000 Coaxial surge diverter, bulkhead N-type female to N-type female TD032031EN MA15/D/1/S1 Power supply surge diverter, 110 Vac/15A TD032029EN IOP32D Signal surge diverter, 2 x 2-wire/1 x 4-wire TD032032EN Power Supplies PS-DINAC-12DC-OK DIN rail power supply, 100–250 Vac, 12 Vdc/2.5A TD032033EN PSG60 DIN rail power supply, 85–264 Vac, 24 Vdc/2.5A TD032034EN Power Supplies BR-YAGI-KIT Mounting bracket kit for Yagi antenna TD032072EN BR-COL-KIT Mounting bracket kit for colinear antenna TD032071EN

1000 Eaton Boulevard

Cleveland, OH 44122 United States Eaton.com © 2014 Eaton All Rights Reserved Printed in USA Publication No. TD032007EN January 2014 Eaton is a registered trademark. All other trademarks are property of their respective owners. 105U-G Wireless Gateway North America & Latin America 5735 W. Las Positas Suite 100 Pleasanton, CA 94588 United States Telephone: +1 925 924 8500 Southeast Asia

2 Serangoon North Avenue 5

# 06-01 Fu Yu Building, 554911 Singapore Telephone: +65 6645 9888 Australia, New Zealand 9/12 Billabong Street Stafford Queensland 4053 Australia Telephone: +61 7 3352 8600 Europe Hein-Moeller-Straße 7-11

53115 Bonn, Germany

Telephone: +49 228 602 5573 China

955 Shengli Road

East Area of Zhangjiang High-Tech Park Shanghai, 201201 China Telephone: +86 21 2899 3600 EaoNn’s wirtltss busintss www.eaton.com/wireless Technical Data TD032007EN Effective January 2014