105PF40T IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

High surge current capability Very low VF Parameters 105PF Units IF(AV) 105 A @ TC 150 °C IF(RMS) 160 A IFSM @ 50Hz 2300 A @ 60Hz 2400 A I2t@ 50Hz 23900 A 2s @ 60Hz 26450 A 2s VRRM range 400 V TJ range - 40 to 180 °C Major Ratings and Characteristics case style DO-203AB (DO-5) 105PF40T STANDARD RECOVERY DIODES (Lead-Free) 105 A Stud Version Bulletin I2028 rev. D 01/05 www.irf.com

Final I2028 rev. D 01/05 www.irf.com Parameter 105PF Units Conditions TJ Max. junction operating temperature range -40 to 180 Tstg Max. storage temperature range -40 to 180 RthJC Max. thermal resistance, junction to case 0.25 AC operation RthCS Max. thermal resistance, case Mounting surface, smooth, flat and to heatsink greased T Allowable mounting torque 2.8 Nm Top thread; using bus-bar or plate, only. 25 lbf · in Avoid silicone grease on thread 3.4 +0-10% Nm Bottom base; tighting on nut (1) 30 lbf · in Not lubricated threads 2.3 +0-10% N m Bottom base; tighting on hexa gon (2) 20 lbf · in Lubricated threads wt Approximate weight 17 (0.6) g (oz) unleaded device Case style DO-203AB (DO5) See Outline Table 0.25 °C/W Thermal and Mechanical Specifications IF(AV) Max. average forward current 105 A 180° conduction, half sine wave @ Case temperature 150 °C 150 A 135 °C IF(RMS) Max. RMS forward current 160 A IFSM Max. peak, one-cycle forward, 2300 t = 10ms No voltage non-repetitive surge current 2400 t = 8.3ms reapplied 1970 t = 10ms 100% V RRM 2050 t = 8.3ms reapplied Sinusoidal half wave, I2t Maximum I 2t for fusing 26450 t = 10ms No voltage Initial T J = TJ max. 23900 t = 8.3ms reapplied 19400 t = 10ms 100% V RRM 17440 t = 8.3ms reapplied I2√t Maximum I 2√t for fusing 200 kA 2√s t = 0.1 to 10ms, no voltage reapplied VF(TO) Value of threshold voltage rf Value of forward slope resistance VFM Max. forward voltage drop 1.05 V VI pk= 200A, TJ = 25°C, tp = 400µs rectangular wave Parameter 105PF Units Conditions 1.0 m Ω TJ = TJ max. 0.75 V T J = TJ max. A2s A Forward Conduction Voltage V RRM, maximum V RSM, maximum non- I RRM max. Type number Code repetitive peak repetitive peak @ TJ = 150°C reverse voltage reverse voltage VV m A 105PF 40 400 500 5 ELECTRICAL SPECIFICATIONS Voltage Ratings (1) As general recommendation we suggest to tight on hexagon and not on nut (2) Torque must be appliable only to hexagon and not to plastic structure

Bulletin I2028 rev. D 01/05 www.irf.com Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics Average Forward Current (A) Maximum Allowable Case Temperature (°C) Average Forward Current (A) Maximum Allowable Case Temperature (°C)120 140 160 180 0 20 40 60 80 100 120 140 160 30˚ 60˚ 90˚ 120˚ 180˚ Conduction Angle 105PF Series 100 110 120 130 140 150 160 170 180 0 50 100 150 200 250 DC 30˚ 60˚ 90˚ 120˚ 180˚ Conduction Period 105PF Series Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Number Of Equal Amplitude Half Cycle Current Pulses (N) Peak Half Sine Wave Forward Current (A) Pulse Train Duration (s) Peak Half Sine Wave Forward Current (A) Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Average Forward Current (A) Maximum Allowable Case Temperature (°C) Average Forward Current (A) Maximum Allowable Case Temperature (°C)0 100 120 140 160 180 0 40 80 120 160 RMS Limit Conduction Angle 180˚ 120˚ 90˚ 60˚ 30˚ 150PF Series 100 150 200 250 0 50 100 150 200 250 DC 180˚ 120˚ 90˚ 60˚ 30˚ RMS Limit Conduction Period 105PF Series 400 600 800 1000 1200 1400 1600 1800 2000 2200 11 0 1 0 Initial Tj = Tj Max. @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. 105PF Series 500 1000 1500 2000 2500 0.01 0.1 1 10 Maximum Non Repetitive Surge Current Initial Tj = Tj Max. No Voltage Reapplied Rated Vrrm Reapplied Versus Pulse Train Duration. 105PF Series

Final I2028 rev. D 01/05 www.irf.com Fig. 7 - Forward Voltage Drop Characteristics Instantaneous Forward Voltage (V) Instantaneous Forward Current (A) Fig. 8 - Thermal Impedance ZthJC Characteristics Square Wave Pulse Duration (s) Transient Impedance Z thJC (K/W) Outline Table 105PF Case Style DO-203AB (DO-5) All dimensions in millimeters (inches) 100 1000 Tj = 25˚C Tj = Tj Max. 105PF Series 0.001 0.01 0.1 0.0001 0.001 0.01 0.1 1 10 85HF(R) Series Steady State Value RthJC = 0.25 K/W (DC Operation)

Bulletin I2028 rev. D 01/05 www.irf.com Ordering Information Table Device Code 1 24 3 1 - Current Rating (105 = 105A) 2 - PF = Plastic Package 3 - Voltage Rating (40 = 400V) 4 - T = Top Thread

105 PF 40 T

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 01/05 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site.