HMC438MS8G AD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

The HMC438MS8G & HMC438MS8GE are low noise Divide-by-5 Static Dividers utilizing InGaP GaAs HBT technology in low cost 8 lead surface mount plastic packages. This device operates from DC (with a square wave input) to 7 GHz input frequency from a single +5V DC supply. The low additive SSB phase noise of -153 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. SSB Phase Noise: -153 dBc/Hz @100 kHz Wide Bandwidth Output Power: -1 dBm Single DC Supply: +5V @ 80 mA Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V Typical Applications Prescaler for DC to C Band PLL Applications:

  • UNII, Point-to-Point & VSAT Radios
  • 802.11a & HiperLAN WLAN
  • Fiber Optic
  • Cellular / 3G Infrastructure 1. Divider will operate down to DC for square-wave input signal. Parameter Conditions Min. Typ. Max. Units Maximum Input Frequency 7. 0 7. 5 GHz Minimum Input Frequency Sine Wave Input [1] 0.1 GHz Input Power Range Fin= 1 to 5 GHz -15 +12 dBm Fin= 5 to 6 GHz -15 +10 dBm Fin= 6 to 7 GHz -15 +5 dBm Output Power -4 -1 dBm Reverse Leakage Both RF Outputs Terminated -50 dBm SSB Phase Noise (100 kHz offset) Pin= 0 dBm, Fin= 6 GHz -153 dBc/Hz Output Transition Time Pin= 0 dBm, Fout= 882 MHz 100 ps Supply Current (Icc) 80 mA HMC438MS8G / 438MS8GE SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7 GHz v07.1019 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

FREQUENCY DIVIDERS & DETECTORS - SMT FREQUENCY DIVIDERS & DETECTORS - SMT 4 - 2 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D -20 -15 -10 0123456789 INPUT POWER (dBm) INPUT FREQUENCY (GHz) SSB Phase Noise Performance, Pin= 0 dBm, Fin= 6GHz, T= 25 °C Input Sensitivity Window, T= 25 °C Input Sensitivity Window vs. Temperature Output Power vs. Temperature Recommended Operating Window Reverse Leakage, Pin= 0 dBm, T= 25 °C Output Harmonic Content, Pin= 0 dBm, T= 25 °C -20 -15 -10 0123456789 Min Pin +25 C Max Pin +25 C Min Pin +85 C Max Pin +85 C Min Pin -40 C Max Pin -40 C INPUT POWER (dBm) INPUT FREQUENCY (GHz) -180 -150 -120 -90 -60 -30 SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -70 -60 -50 -40 -30 -20 -10 0123456789 Both Output Ports Terminated One Output Port Terminated OUTPUT LEVEL (dBm) INPUT FREQUENCY (GHz) -50 -40 -30 -20 -10 0123456789 Pfeedthru 2nd Harm 3rd Harm OUTPUT LEVEL (dBm) INPUT FREQUENCY (GHz) 0123456789 +25 C +85 C -40 C OUTPUT POWER (dBm) INPUT FREQUENCY (GHz) HMC438MS8G / 438MS8GE SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7 GHz v07.1019

FREQUENCY DIVIDERS & DETECTORS - SMT FREQUENCY DIVIDERS & DETECTORS - SMT 4 - 3 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Output Voltage Waveform, Pin= 0 dBm, Fout= 882 MHz, T= 25 °C Typical Supply Current vs. Vcc Note: Divider will operate over full voltage range shown above Vcc (V) Icc (mA) 4.75 75 5.0 80 5.25 87 DC blocking capacitors are required at RF input and RF output ports. Choose value for lowest frequency of operation. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS -300 -200 -100 100 200 300 400 22.5 23 23.5 24 24.5 25 25.5 AMPLITUDE (mV) TIME (ns) HMC438MS8G / 438MS8GE SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7 GHz v07.1019 Absolute Maximum Ratings Reliability Information RF Input Power (Vcc = +5V) 13 dBm Nominal +5V Supply to GND -0.3V to +5.5V Max Peak Flow Temperature 260 °C Storage Temperature -65 to +125 °C ESD Sensitivity (HBM) Class 1A Junction Temperature to Maintain

1 Million Hour MTTF 135 °C

Nominal Junction Temperature (T = 85 °C) 122 °C Thermal Resistance (Junction to GND Paddle, 5V Supply) 88.5 °C/W Operating Temperature -40 to +85 °C

FREQUENCY DIVIDERS & DETECTORS - SMT FREQUENCY DIVIDERS & DETECTORS - SMT 4 - 4 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Outline Drawing Pin Number Function Description Interface Schematic 1 Vcc Supply voltage 5V ± 0.25V. 2 IN RF input must be DC blocked. Pin Description Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC438MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H438 XXXX HMC438MS8GTR Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H438 XXXX HMC438MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H438 XXXX HMC438MS8GETR RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H438 XXXX 105786- HMC438MS8G Eval Board [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX

Package Information

DIVIDE-BY-5, DC - 7 GHz v07.1019 0.94 0.86 0.78 0.40 0.33 0.25 8-Lead Mini Small Outline Package with Exposed Pad [MINI_SO_EP] (RH-8-1) Dimensions shown in millimeters COMPLIANT TO JEDEC STANDARDS MO-187-AA-T 3.10 3.00 2.90 3.10 3.00 2.90 5.05 4.90 4.75 0.70 0.55 0.40 0.13 MAX 0.95 REF TOP VIEW BOTTOM VIEW SIDE VIEW END VIEW 08-02-2019-B PKG-003371 0.65 BSC 1.10 MAX

1.95 BSC

0.23 0.08 COPLANARITY 0.10

0.25 GAGE

2.26 2.16 2.06 1.83 1.73 1.63 EXPOSED PAD 8-Lead Mini Small Outline Package with Exposed Pad [MINI_SO_EP] (RH-8-1) Dimensions shown in millimeters

FREQUENCY DIVIDERS & DETECTORS - SMT FREQUENCY DIVIDERS & DETECTORS - SMT 4 - 5 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Application Circuit HMC438MS8G / 438MS8GE SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7 GHz v07.1019 Pin Number Function Description Interface Schematic

3 IN RF input 180° out of phase with pin 2 for differential

operation. AC ground for single ended operation. 4, 5 GND All ground leads and ground paddle must be soldered to PCB RF/DC ground. 6 OUT Divided output 180° out of phase with pin 7 . 7 OUT Divided Output.

8 N/C

The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. Pin Description (Continued)

FREQUENCY DIVIDERS & DETECTORS - SMT FREQUENCY DIVIDERS & DETECTORS - SMT 4 - 6 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Evaluation PCB List of Materials for Evaluation PCB 105786 [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4, J5 DC Pin C1 - C4 100 pF Capacitor, 0402 Pkg. C5 10,000 pF Capacitor, 0603 Pkg. C6 4.7 µF Tantalum Capacitor U1 HMC438MS8G / HMC438MS8GE Divide-by-5 PCB [2] 105697 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and backside ground slug should be con - nected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Analog Devices, upon request. This evaluation board is designed for single ended input testing. J2 and J3 provide differential output signals. HMC438MS8G / 438MS8GE SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7 GHz v07.1019