SFM60-HLKB0K02 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE®
A B C D E F H I J K L M N O P Q R S T SFM60-HLKB0K02 | SFS/SFM60 MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE® Illustration may differ
Ordering information
Type Part no. SFM60-HLKB0K02 1054723 Other models and accessories www.sick.com/SFS_SFM60 Detailed technical data Performance Number of sine/cosine periods per revolu- tion 1,024 Number of the absolute ascertainable revo- lutions 4,096 Total number of steps 134,217,728 Measuring step 0.3 Winkelsekunden For interpolation of the sine/cosine signals with, e. g., 12 bits Integral non-linearity ± 45 Winkelsekunden, Error limits for evaluating sine/cosine period, without mechanical ten- sion of the stator coupling Differential non-linearity ± 7 Winkelsekunden, Non-linearity within a sine/cosine period Operating speed 6,000 min⁻¹, up to which the absolute position can be reliably produced Interfaces Type of code for the absolute value Binary Code sequence Rising, For clockwise shaft rotation, looking in direction “A” (see dimensional drawing) Communication interface HIPERFACE® Available memory area 1,792 Byte Electrical data Supply voltage range 7 V DC ... 12 V DC Recommended supply voltage 8 V DC Operating power consumption (no load) < 80 mA 1) Output frequency for sine/cosine signals 0 kHz ... 200 kHz 1) Without load. Mechanical data Shaft version Blind hollow shaft Shaft material Stainless steel Flange material Zinc diecast Housing material Aluminum die cast 1) Take into account self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
2 MOTOR FEEDBACK SYSTEMS | SICK Online data sheet | 2017-07-11 20:51:27
Subject to change without notice
SFM60-HLKB0K02 | SFS/SFM60 MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE® Flange type / stator coupling Stator coupling Dimensions See dimensional drawing Weight ≤ 0.25 kg Moment of inertia of the rotor 40 gcm² Operating speed ≤ 9,000 min⁻¹ 1) Angular acceleration ≤ 500,000 rad/s² Operating torque 0.6 Ncm (+20 °C) Start up torque 0.8 Ncm (+20 °C) Permissible shaft movement, radial stat- ic/dynamic Permissible shaft movement, axial stat- ic/dynamic Life of ball bearings 3.6 x 10^9 revolutions Connection type Cable, 8-wire, radial, 1.5 m 1) Take into account self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range. Ambient data Operating temperature range –40 °C ... +115 °C Storage temperature range –40 °C ... +115 °C, without package Relative humidity/condensation 90 %, Condensation not permitted Resistance to shocks 100 g, 6 ms (according to EN 60068-2-27) Frequency range of resistance to vibrations 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) EMC According to EN 61000-6-2 and EN 61000-6-3 1) Enclosure rating IP65, with mating connector inserted (according to IEC 60529) 1) The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to the central earthing point of the motor controller via a cable screen. The GND-(0 V) connection of the supply voltage is also grounded here. If other shielding concepts are used, users must perform their own tests. Classifications ECl@ss 5.0 27270590 ECl@ss 5.1.4 27270590 ECl@ss 6.0 27270590 ECl@ss 6.2 27270590 ECl@ss 7.0 27270590 ECl@ss 8.0 27270590 ECl@ss 8.1 27270590 ECl@ss 9.0 27270590 ETIM 5.0 EC001486 ETIM 6.0 EC001486 UNSPSC 16.0901 41112113 2017-07-11 20:51:27 | Online data sheet Subject to change without notice MOTOR FEEDBACK SYSTEMS | SICK 3
A B C D E F H I J K L M N O P Q R S T SFM60-HLKB0K02 | SFS/SFM60 MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE® Dimensional drawing (Dimensions in mm (inch)) Blind hollow shaft, cable connection - standard system min. 15 (0.59) max. 42 (1.65) 47 (1.85) Ø X F7 Ø X h7 45.5 (1.79) 9.4 (0.37) 3.4 (0.13) 2.5 (0.10) Ø 35 (1.38) Ø 60 (2.36) Ø 3.2 +0.1 (0.13) 20° 20 (0.79) Ø 63 +0.2 (2.48) 72 ±0.3 (2.83) A General tolerances according to DIN ISO 2768-mk ① Cable diameter = 5.6 mm +/- 0.2 mm bend radius = 30 mm Diagram Signal specification of the process channel Signal diagram for clockwise rotation of the shaft looking in direction "A" (see dimensional drawing)1 period = 360 ° : 1024
4 MOTOR FEEDBACK SYSTEMS | SICK Online data sheet | 2017-07-11 20:51:27
Subject to change without notice
SFM60-HLKB0K02 | SFS/SFM60 MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE® Recommended accessories Other models and accessories www.sick.com/SFS_SFM60 Brief description Type Part no. Flanges Stator coupling, 16.5 mm high BEF-DS05XFX 2057423 Stator coupling with hole circle diameter 63 mm BEF-DS07XFX 2059368 Programming and configuration tools SVip® LAN programming tool for all motor feedback systems PGT-11-S LAN 1057324 SVip® WLAN programming tool for all motor feedback systems PGT-11-S WLAN 1067474 2017-07-11 20:51:27 | Online data sheet Subject to change without notice MOTOR FEEDBACK SYSTEMS | SICK 5
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com