104GT-1

15TP551T ETC1 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 44

Technical content

CAT. No.129E

VRD (TRANSIENT VOLTAGE SUPPRESSOR) CRD (CURRENT REGULATIVE DIODE) ZENAMIC (METAL OXIDE VARISTOR) GAS TUBE ARRESTER HIGH PRECISION SERIES SMD SERIES HIGH HEAT-RESISTANCE SERIES DISK SERIES SENSORS NON-CONTACT SENSOR 4 THERMOPILE NC SENSOR D-TYPE SERIES MARK SERIES D2-TYPE SERIES SMD SERIES LEAD TYPE SERIES LEAD TYPE SERIES MELF TYPE SERIES LEAD TYPE SERIES M TYPE SERIES SURGE ABSORBER UNIT SERIES CERAMIC TUBE SERIES GLASS TUBE SERIES SA-01 SERIES

Thermopile type Infrared sensor utilizing own silicon micromachining technology. Applications:Eardrum thermometer Microwave oven Non contact temparature measurement Part No. 15TP551T 15TP551N 10TP581T type TO5 TO18 Thermistor Built-in /H11002 Built-in 8.2 /H110060.05 /H110063/H11034 4.5/H110063/H11034 0.8/H110060.1 1.8 max45/H11034 /H92780.8 A 1.56 /H110060.01 9.4 max 1 14 4 3 3 /H92783.8/H110060.05 /H92780.45/H110060.03 10.3 max A TO5 4.65/H110060.05 (3.12) (2.4) /H92780.7 A 1.05 /H110060.01 5.6 max 2.4 A TO18 /H110010.1 /H110020.4 /H92780.45 /H110010.05 /H110020.03 3.2/H110010.3 /H110020.1 6.6 max (TOP VIEW) (SIDE VIEW) (BOTTOM VIEW) 5.08/H110060.2 1/H110060.2 1.35/H110060.2 2.2/H110060.1 13.2/H110060.5 Au plated SENSOR SURFACE FILTER SURFACE R 0.3 max R 0.5 max OPTICAL DISTANCE 2.54/H110060.2 13.2/H110060.5 2.95 /H110060.2 1.25/H110060.2 0.55/H110060.2 SENSOR SURFACE FILTER SURFACE R 0.3 max OPTICAL DISTANCE

1551 T 0 011

Parameters Unit Conditions Value 15TP551 10TP581 Sensitive area *1 Responsivily *1 Output Voltage *2 Output Voltage *1 Temperature Coefficient of Responsivily Thermopile Resistans Temperature Coefficient of Thermopile Resistance Johnson Noise Voltage *1 S/N Ratio *1 Noise Equivalent Power *1 Specific Detecivity Time Constant Operating Temperature range Strage Temperature renge Filter Range Field of View Insulation Rasistance Sealing *3 Thermistor Resistance Value *3 Thermistor B-Value *3 Thermistor Rated Power Test Condition Blackbody Temperature Sensor-Blackbody Distance Sensor Temperature Aperture size : 500K : 100mm : 298K : /H927812.7mm *1 Test Condition Blackbody Temperature Sensor Temperature : 310K : 298K Built-in Type*3 1.56/H110031.56 16/H1100630% 490/H1100630% 2.49/H1100630% 0.01/H110060.02 55/H1100630% /H110060.1 84.2 1.9 8.4/H1100310 /H1100220/H11011100 /H1100240/H11011100 Cut on 5 /H1100645 500 1/H1100310/H110029 100/H110063% 3435/H110060.7% 0.5 1.05/H110031.05 15/H1100630% 200/H1100630% 1.00/H1100630% 0.02/H110060.02 65/H1100630% /H110060.1 75.7 2.2 4.7/H11003107 /H1100220/H11011100 /H1100240/H11011100 Cut on 5 /H1100650 500 1/H1100310/H110029 100/H110063% 3435/H110060.7% 0.5 mm 2 V/ W /H9262V mV % / /H11034C k/H9024 % / /H11034C nV/ /H20844/H20690 dB nW/ Hz1/2 cm •Hz1/2/ w ms /H11034C /H11034C /H9262m deg. M /H9024 Pa•m 3/ s k/H9024 K mW Size of Absorbing Film Reference Johnson Noise r.m.s.,298K 1Hz Typical Output Voltage/Johnson Noise, Typical Typical Typical Typical Standard Incident Angle to Ahieve 50% Responsivity Rated zero-power resistance Value at 25/H11034C at 25/H11034C Hz Unit mm THERMOPILE TYPE INFRARED SENSOR

NC SENSOR is the remote temperature sensor consisting of two precision thermistors. 1.Features 3. Dimensions 4.Specification Parameters F-type (for heat-roller) M-type (for microwave ovens) Performance 180/H11034C /H110063/H11034C Conditions Temperature Accuracy Blackbody Temperature : 180/H11034C Thermal Emissivity : 0.96 Temperature compensation : 100/H11034C Roller Size : 40mm Testing Distance : 5mm Resistor Connected : 33.0/H9024 Power Line Voltage : DC 5.000V Operating Temperature Range Temperature Detecting range

• Larger output in comparison with other IR sensors.
• Operating temperature of up 150/H11034C .
• Minimum negative influence caused by a dew and/or dust. 2.Applications
• Temperature measurment of the LBP and PPC heat- roller.
• White goods such as microwave-ovens, air-conditioner, refrigerator and so on.
• Any other measurement requiring the remote-sensing. 52.5 4.6 29.2 21.2 6 5.5 34.5 5 200 (120 /H11011300) 160 (120/H11011300) 12.6 /H92783.2 /H92785.6 /H92788 F-type M-type Unit mm Unit mm Performance Conditions Blackbody Temperature : 60/H11034C Thermal Emissivity : 0.995 Temperature compensation : 25/H11034C Resistor Connected : 68.0/H9024 Power Line Voltage : DC 5.000V 60/H11034C /H110065/H11034C /H1100210/H11034C /H11011150/H11034C /H1100210/H11034C /H11011260/H11034C /H1100210/H11034C /H11011100/H11034C NON-CONTACT SENSOR (Infrared sensing temperature detector)

B:3350 B:3400 B:3650 10k 100k Resistance(/H9024) Temperature(1/ Tx103) THERMISTOR "Thermistor" is the generic name given to thermally sensitive resistors. Negative temperature coefficient thermistor is generally called as thermistor. Thermistor is a semiconducting ceramic resistor produced by sintering the materials at high temperature and made mainly from metal oxide. Depending on the manufacturing method and the structure, there are many shapes and characteristics for various purposes such as temperature measurement, temperature compensation and etc. The thermistor resistance values, unless otherwise specified, are classified at a standard temperature of 25/H11034C. B constant is calculated from the resistance values at 25/H11034C and 85/H11034C. The resistance of a temperature is solely a function of its absolute temperature. Since electrical power being dissipated within a temperature might heat above its ambient temperature and thereby reduce its resistance, it is necessary to test for resistance with temperature. The resistance so measured is called RT, which means the resistance at essentially zero-power. The mathematical expression which relates the resistance and the absolute temperature of a thermistor is as follows: Ra/H11005Rb exp B 1 B /H11002 Ra T1Where: is the resistance at absolute temperature is the resistance at absolute temperatureRb T2 B is a constant which depends on the material of the thermistor Unless otherwise specified,all values of B are determined from measurements made at 25/H11034C and 85/H11034C. The temperature coefficient of resistance /H9251 is expressed in the follow ing equation: /H11003100 (%/ /H11034C)/H9251/H11005/H11002 Resistance -Temperature Characteristics Dissipation factor Thermal time constant Dissipation factor (/H9254) is power in milliwatts required to raise thermistor temperature 1/H11034C. Measured with thermistor suspended by its leads in a specified environment. /H9254/H11005 t:Raise temperature(/H11034C) t P (mW/ /H11034C) P :Power(mW) Thermal time constant (/H9270a) is the time required by a thermistor to change 63% of the difference between its initial and final temperature.Measured with thermistor suspended by its leads in specified environment. /H9270a 2/H9270a 3/H9270a 5/H9270a Time (s) (%) /H9004 /H9004

JT thermistors feature ultra thinness of 500/H9262m and superior electrical insulation. It is possible to use with safety in ambience that might contact with electrodes. Part number

103 JT-025

Rated zero-power resistance at 25/H11034C 103 : 10k/H9024 JT thermistor Dimensions A 3.6/H110060.5 5/H110061 2.0/H110060.5 0.5/H110060.035 0.17/H110060.02 1.8/H110060.1 Unit(mm) 0.5max. Adhesive lnsulation film lnsulation film Tin plated wires

42 Alloy leads

Slipped film : 1 max. Protruded adhesive : 1 max. Shape Dimensions A 025 25 /H110061 50/H110061 75/H110061 100/H110061 050 075 100 Specifications Type Resistance-Temperature Temperature (/H11034C) Unit(k/H9024) /H1100250 /H1100240 /H1100230 /H1100220 /H1100210 100 110 120 125 367.7 204.7 118.5 71.02 43.67 27.70 18.07 12.11 8.301 5.811 4.147 3.011 2.224 1.668 1.267 103JT 104JT Part No. R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant(s)*3 Operating temp. range(/H11034C) Rated power at 25/H11034C(mW) 103JT- 104JT- 10k/H9024/H110061% 100k/H9024/H110061% 3435K/H110061% 4390K/H110061% 0.7 0.7 3.5 3.5 /H1100250/H1101190 /H1100250/H11011125 9584 4572 2282 1191 647.2 365.0 212.5 127.7 78.88 50.03 32.51 21.61 14.66 10.13 7.135 5.111 3.720 2.746 2.371 1 R25 : Rated zero-power resistance value at 25/H11034C, /H110062% and 3% are also available. 2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. 3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. ULTIMATE THINNESS, JT THERMISTOR 500/H9262m only

1.0 Tiebar cut 4.0 max. 2.54/H110060.25 8.5/H110061 17/H110061.5 Color code Epoxy

0.5 Tin-Plated

42 Alloy

2.4 max. 2.4 max.3.8 max. 15 max. Marking 0.3sq TPE lead wire 4.0 max. 5 max. 2.54/H110060.25 5/H110061 8.5/H110061 6/H110060.2 17/H110061.5 0.7 Tiebar cut 3.8 max. Epoxy Color code The AT thermistor is a high-precision thermal sensing device featuring extremely small B-value tolerance and resistance. When used as a temperature gauge, the AT thermistor requires no adjustment between the control circuit and the sensor. This insures temperature precision of /H110060.3/H11034 Temperature indicators and control instruments are now available for use with the thermistor.

102 AT-2

High-precision AT thermistor Rated zero-power Resistance at 25/H11034C 102 : 1 k Dimensions Interchange precision Part number Specifications Temperature precision /H11006/H11034C 2.5 2.0 1.5 1.0 0.5 /H110060.5/H11034C /H110060.7/H11034C /H110061/H11034C 102AT-2 202AT-2 502AT-2 103AT-2 203AT-2 503AT-2 104AT-2 103AT-3 102AT-11 202AT-11 502AT-11 103AT-11 1.0k /H9024/H110061% 2.0k/H9024/H110061% 5.0k/H9024/H110061% 10.0k/H9024/H110061% 20.0k/H9024/H110061% 50.0k/H9024/H110063% 100.0k/H9024/H110061% 10.0k/H9024/H110061% 1.0k/H9024/H110061% 2.0k/H9024/H110061% 5.0k/H9024/H110061% 10.0k/H9024/H110061% 3100K/H110061% 3182K/H110061% 3324K/H110061% 3435K/H110061% 4013K/H110061% 4060K/H110061% 4665K/H110061% 3435K/H110061% 3100K/H110061% 3182K/H110061% 3324K/H110061% 3435K/H110061% /H1100250/H1101190 /H1100250/H1101190 /H1100250/H11011110 /H1100250/H11011110 /H1100250/H11011110 /H1100250/H11011110 /H1100250/H11011110 /H1100250/H11011110 /H1100250/H1101190 /H1100250/H1101190 /H1100250/H11011105 /H1100250/H11011105 Black Red Yellow White None None None White None None None None 103AT-2S 103AT-2SS 103AT-4 Shape1 10.0k /H9024/H110061% 10.0k/H9024/H110061% 3435K/H110061% 3435K/H110061% /H1100250/H11011110 /H1100250/H11011110 white white 10.0k/H9024/H110061% 10.0k/H9024/H110061% 3435K/H110061% 3435K/H110061% /H1100230/H1101190 /H1100230/H1101190 None None Part No R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant (s)*3 Operating temp. range(/H11034C) Color codeRated power at 25/H11034C (mW) *1 R25 : Rated zero-power resistance value at 25/H11034C. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. 103AT-4 Shape2 Resistance tolerance /H1100240 /H1100230/H1100220/H1100210 0 10 20 30 40 50 60 70 80 90 100 Resistance tolerance /H11006 Ambient temperature /H11034C /H1100240 /H1100230/H1100220/H1100210 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature /H11034C Unit mm 8max. 13max. Epoxy 2.5max. 4max. UL1685 AWG30 40/H11011100 AT-4 Shape1 Shape2 30 5 100/H11011225 Epoxy resin HVFF 0.14sq Color code Epoxy Epoxy 0.25t Tin plated 42 Alloy leads 3.0/H110114.0 2.9/H110113.3 2.54/H110060.25 17/H110061.5 8.5/H110061 (0.7) (0.35) Color code 0.25t Tin plated 42 Alloy leads4.0/H110114.5 2.9/H110113.3 2.54/H110060.25 17/H110061.5 8.5/H110061 (0.7) (0.9) (0.6) (0.35) Other resistance is also available, please ask. AT-11,AT-2 AT-4 HIGH PRECISION THERMISTOR

103 AT-5-TP

High-precision AT thermistor Rated zero-power resistance at 25/H11034C Part number Specifications Part No R 25 B value Dissipation factor (mW/ /H11034C) Thermal time constant (s) Operating temp. range(/H11034C) Rated power at 25/H11034C (mW) 103AT-5 10.0k /H9024/H110061% 3435K /H110061% 2.5 15 10 /H1100250/H11011110 Dimensions Taping AT-5 Resistance -Temperature 24.46 18.68 14.43 11.23 8.834 6.998 5.594 4.501 3.651 2.979 2.449 2.024 1.684 1.408 1.184 1.000 0.8486 11473 7781 5366 3728 2629 1864 1340 969.0 709.5 523.3 390.3 292.5 221.5 168.6 129.5 100.0 77.81 55.66 42.17 32.34 24.96 19.48 15.29 12.11 9.655 7.763 6.277 5.114 4.188 3.454 2.862 2.387 2.000 1.684 154.6 116.5 88.91 68.19 52.87 41.21 32.44 25.66 20.48 16.43 13.29 10.80 8.840 7.267 6.013 5.000 4.179 329.5 247.7 188.5 144.1 111.3 86.43 67.77 53.41 42.47 33.90 27.28 22.05 17.96 14.69 12.09 10.00 8.313 642.0 465.8 342.5 253.6 190.0 143.2 109.1 83.75 64.88 50.53 39.71 31.36 24.96 20.00 16.12 1632 1186 872.8 646.3 484.3 364.6 277.5 212.3 164.0 127.5 99.99 78.77 62.56 50.00 40.20 /H1100250 /H1100245 /H1100240 /H1100235 /H1100230 /H1100225 /H1100220 /H1100215 /H1100210 /H110025 100 105 110 0.7229 0.6189 0.5316 0.4587 0.3967 0.3446 0.3000 0.2622 0.2285 0.1999 0.1751 0.1536 1.424 1.211 1.033 0.8854 0.7620 0.6587 0.5713 0.4975 0.4343 0.3807 0.3346 0.2949 3.508 2.961 2.509 2.137 1.826 1.567 1.350 1.168 1.014 0.8835 0.7722 0.6771 0.5961 0.5265 0.4654 0.4128 6.940 5.827 4.911 4.160 3.536 3.020 2.588 2.228 1.924 1.668 1.451 1.266 1.108 0.9731 0.8572 0.7576 13.06 10.65 8.716 7.181 5.941 4.943 4.127 3.464 2.916 2.468 2.096 1.788 1.530 1.315 1.134 0.9807 102AT 202AT 502AT 103AT 203AT 503AT 104AT 104AT Temperature (/H11034C) Temperature (/H11034C) 102AT 202AT 502AT 103AT 203AT 503AT Unit(k/H9024) 32.48 26.43 21.59 17.75 14.64 12.15 10.13 8.482 7.129 6.022 5.105 4.345 3.712 3.185 2.741 2.369 60.94 48.10 38.13 30.44 24.42 19.72 15.99 13.05 10.68 8.796 7.271 6.041 5.037 4.220 3.546 2.994 Type Type 1253 890.5 3168 2257 Other resistance is also available, please ask. AT-5 thermistor is available in taping. 3/H110061 6/H110061 30/H110061 3.5/H110061 2.5/H110060.5 2.4/H110061 Epoxy 103AT /H92780.5 Tin plated CP leads 1 2 3/H110061 9.0 /H110012.0 /H110021.016.0/H110060.5 11.0 max. 3.5/H110061 6.35/H110061.3 12.7/H110061.0 12.7/H110060.3 1 max. /H110010.8 /H110020.2 /H92780.5/H110060.05 3 max. /H92784.0/H110060.3 12.5 min 9.0 /H110010.75 /H110020.5 18.0 /H110060.5 2.4/H110061 2.0 max. 2.0 max. 1.5 max. 0.6/H110060.3 *1 R25 : Rated zero-power resistance value at 25/H11034C. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. AT-5

4 max. 4 max. /H92781.5 max./H92781.6 max. 3/H110062 4/H11006221/H110061 87/H110061 45/H110061 Resin(black) Resin (ET-2 : light brown, ETB : black) Soldered terminal Resin (0.17) (0.25) Enlarged view Solder plated lead wires (resin coated insulation) Solder plated lead wires (0.17) (0.25) Enlarged view ET -2, ETB ET -3 ET -1 Part number Dimensions ET THERMISTOR The ET thermistor is smaller version of the AT thermistor. Its fast response time and high reliability makes it Particularly suitable for use in medical equipment and thermometers. Manufactured by full-automated production line, all ET thermistors have identical size and that makes it possible to assemble sensors automatically.

503 ET 1-

Rated zero-power resistance at 25/H11034C 503 : 50k/H9024 Specifications Part No. R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant (s)*3 Operating temp. range (/H11034C) Rated power at 25/H11034C(mW) 402ET-1(2) 103ET-1(2) 303ET-1(2) 403ET-1(2) 413ET-1(2) 503ET-1(2) 593ET-1(2) 833ET-1(2) 104ET-1(2) 224ET-1(2) 234ET-1(2) 103ETB 503ET-3 4.0k /H9024/H110063% 10.0k/H9024/H110063% 30.0k/H9024/H110063% 40.0k/H9024/H110063% 41.0k/H9024/H110063% 50.0k/H9024/H110063% 59.0k/H9024/H110063% 83.0k/H9024/H110063% 100.0k/H9024/H110063% 226.0k/H9024/H110063% 232.0k/H9024/H110063% 10.0k/H9024/H110062% 50.0k/H9024/H110062% 3100K/H110061% 3250K/H110061% 3760K/H110061% 3525K/H110061% 3435K/H110061% 4055K/H110061% 3617K/H110061% 4013K/H110061% 4132K/H110061% 4021K/H110061% 4274K/H110061% 3435K/H110061% 4086K/H110061% 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 /H1100240/H11011 90 /H1100240/H11011 90 /H1100240/H11011100 /H1100240/H11011100 /H1100240/H11011100 /H1100240/H11011100 /H1100240/H11011100 /H1100240/H11011100 /H1100240/H11011 90 /H1100240/H11011100 /H1100240/H11011100 /H1100240/H11011 90 /H1100240/H11011100 Temperature (/H11034C ) Type Resistance-Temperature Unit (k/H9024) Unit (k/H9024) /H1100240 /H1100230 /H1100220 /H1100210 100 57.71 35.34 22.38 14.60 9.797 6.737 4.736 3.394 2.476 1.835 1.378 1.049 0.7997 0.6145 170.9 102.2 63.07 40.08 26.16 17.51 11.99 8.387 5.988 4.353 3.217 2.414 1.836 1.416 253.7 149.8 91.30 57.31 37.00 24.47 16.56 11.45 8.070 5.791 4.222 3.125 2.346 833.3 481.1 287.5 177.2 112.4 73.00 48.61 33.08 22.96 16.26 11.70 8.569 6.367 4.797 3.662 772.8 456.5 277.9 174.1 111.7 73.63 49.57 34.08 23.89 17.06 12.38 9.135 6.838 5.190 3.990 474.4 272.7 161.9 99.13 62.38 40.24 26.58 17.93 12.33 8.588 6.064 4.338 3.142 445.8 271.7 170.1 109.4 72.10 48.55 33.41 23.44 16.73 12.15 8.951 6.697 5.077 788.5 453.0 269.3 164.8 103.6 66.91 44.18 29.80 20.51 14.37 10.24 7.419 5.459 977.5 559.0 329.8 200.5 125.3 80.27 52.62 35.23 24.00 16.59 11.64 8.287 2116 1225 730.1 447.8 282.1 182.1 120.3 81.07 55.75 39.01 27.78 20.10 14.75 2515 1401 808.2 480.2 293.7 184.4 118.6 78.00 52.39 35.87 24.99 17.72 12.75 204.7 118.5 71.02 43.67 27.70 18.07 12.11 8.301 5.811 4.147 3.011 2.224 1.668 1.267 402ET 103ET 303ET 403ET 413ET 503ET 593ET 833ET 104ET 224ET 234ET 103ETB Specifications for clinical thermo-meter Temperature (/H11034C ) Type 40.22 30.00 21.75 3953 67.04 50.00 36.25 3953 182.4 136.0 98.56 3958 184.5 135.0 95.87 4209 R R 37 R 45 B30/45(K) 503ET 833ET 224ET 234ET Unit (mm) 1602 855.0 1318 754.3 2664 1421 3325 1769 7005 3784 9046 4680 810.7 445.1 Epoxy resin (White) Polyurethane-covered CP wire /H92780.16 Color:White Soldered (Pb free) 100/H110062 3/H1100615max. /H92781.6max. *1 R25 : Rated zero-power resistance value at 25/H11034C. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.

Our newly developed IT thermistors are axial leaded diode type packaged in high-density resin mold and featured strength against various operating environments. We offer IT thermistor with /H110062% tolerance for a resistance value of 25/H11034C and /H110061% for B value. IT thermistors are the most appropriate device for accurate temperature control below 100/H11034C. 103 IT IT thermistor Rated zero-power resistance at 25/H11034C 103 : 10k/H9024 Mark Reel Ammopack (Zig-Zag) Epoxy /H92780.6 Silver plated CP wire /H92782.5/H110060.1 /H927895/H110062 /H927876/H110062 70/H110062 100/H110065 260/H110065 80/H110065 24/H110060.5 /H927830/H110062 /H9278350/H11006230/H1100623 0 /H1100623/H110060.1 103 AA Lot NO 103 : 10k/H9024 Unit (mm) (mm) Unit (mm) Unit (mm) 1.2 max 0.5 max. Minimum quantity : 5000 pcs/reel Minimum quantity : 2000 pcs/box Label 182.1 93.35 49.85 27.75 16.02 9.541 5.876 3.728 2.431 1.623 303.4 155.6 83.09 46.25 26.70 15.90 9.793 6.214 4.051 2.705 367.7 204.7 118.5 71.02 43.67 27.70 18.07 12.11 8.301 5.811 1539 810.8 445.1 253.8 149.8 91.31 57.32 36.99 24.47 16.56 3135 1602 855.0 474.4 272.7 161.9 99.13 62.38 40.24 26.58 9584 4572 2282 1191 647.2 365.0 212.5 127.7 78.88 50.03 1026 540.5 296.7 169.2 99.85 60.87 38.21 24.66 16.31 11.04 Specifications Part No. R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant (s) *3 Operating temp. range (/H11034C) Rated power at 25/H11034C (mW) *1 R25 : Rated zero-power resistance value at 25/H11034C, /H110061% and 3% are also available. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. 302I T 3.0k/H9024/H110062% 5.0k/H9024/H110062% 10.0k/H9024/H110062% 20.0k/H9024/H110062% 30.0k/H9024/H110062% 50.0k/H9024/H110062% 100.0k/H9024/H110062% 3860K/H110061% 3860K/H110061% 3435K/H110061% 3760K/H110061% 3760K/H110061% 4055K/H110061% 4390K/H110061% 3.6 3.6 3.6 3.6 3.6 3.6 3.6 13.5 13.5 13.5 13.5 13.5 13.5 13.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 /H1100250/H11011125 /H1100250/H11011125 /H1100250/H11011100 /H1100250/H11011125 /H1100250/H11011125 /H1100250/H11011125 /H1100250/H11011125 Resistance-Temperature /H1100250 /H1100240 /H1100230 /H1100220 /H1100210 Temperature (/H11034C) Temperature (/H11034C) 1.109 0.7744 0.5513 0.4000 0.2951 0.2210 0.1680 0.1295 0.1142 100 110 120 125 1.849 1.291 0.9189 0.6667 0.4918 0.3683 0.2800 0.2158 0.1903 4.147 3.011 2.224 1.668 1.267 0.9753 7.632 5.380 3.861 2.815 2.083 1.564 1.190 0.9159 0.8067 11.45 8.070 5.792 4.223 3.125 2.346 1.785 1.374 1.210 17.93 12.33 8.588 6.064 4.338 3.142 2.302 1.705 1.472 32.51 21.61 14.66 10.13 7.135 5.111 3.720 2.746 2.371 Unit (k/H9024) IT THERMISTOR Unit 502I T 103I T 1 0 4IT 503I T 302I T 502I T 103I T 203I T 303I T 503I T 104I T 302I T 502I T 203I T 303I T 503I T 104I T103I T 303I T 203I T Type Type ACCURATE AXIAL TYPE THERMISTOR

1.6/H110060.15 2.65/H110060.2 103 Dimensions Dimensions Taping Taping 1.6/H110060.15 3.0/H110060.3 0.3 0.8 1.1/H110060.15 2.65/H110060.2 8.65/H110060.5 5.25/H110060.11.7 103 Mark Epoxy resin Solder plated lead wires 0.6 /H110060.1 (0.1) 0.8 0.6 Unit (mm) Part number HT THERMISTOR 103 HT Shape Tolerance of R25 Taping HTF only Rated zero-power resistance at 25/H11034C 103 : 10k/H9024 HT thermistors are entirely new type of thermistor for surface mounting (by reflow soldering) and were acquired from advanced technology. Our HT thermistors are adapted metal electrodes packaged in a resin mold, unlike conventional chip thermistors, and can offer /H110062% tolerance for a resistance value at 25/H11034C. HT series (SMD Thermistor) is not only compact- surface mounting type but also highly accurate and reliable. 182.1 93.35 49.85 27.75 16.02 9.541 5.876 3.728 2.431 1.623 303.4 155.6 83.09 46.25 26.70 15.90 9.793 6.214 4.051 2.705 367.7 204.7 118.5 71.02 43.67 27.70 18.07 12.11 8.301 5.811 1539 810.8 445.1 253.8 149.8 91.31 57.32 36.99 24.47 16.56 3135 1602 855.0 474.4 272.7 161.9 99.13 62.38 40.24 26.58 9584 4572 2282 1191 647.2 365.0 212.5 127.7 78.88 50.03 1026 540.5 296.7 169.2 99.85 60.87 38.21 24.66 16.31 11.04 Specifications Part No. R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant (s)*3 Operating temp. range (/H11034C) Rated power at 25/H11034C (mW) 1 R25 : Rated zero-power resistance value at 25/H11034C, /H110061% and 3% are also available. 2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. 3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. 302HT(F) 502HT(F) 103HT(F) 203HT(F) 303HT(F) 503HT(F) 104HT(F) 3.0k /H9024/H110062% 5.0k/H9024/H110062% 10.0k/H9024/H110062% 20.0k/H9024/H110062% 30.0k/H9024/H110062% 50.0k/H9024/H110062% 100.0k/H9024/H110062% 3860K/H110061% 3860K/H110061% 3435K/H110061% 3760K/H110061% 3760K/H110061% 4055K/H110061% 4390K/H110061% 1.0 1.0 1.0 1.0 1.0 1.0 1.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 /H1100250/H11011125 /H1100250/H11011125 /H1100250/H11011100 /H1100250/H11011125 /H1100250/H11011125 /H1100250/H11011125 /H1100250/H11011125 Resistance-Temperature /H1100250 /H1100240 /H1100230 /H1100220 /H1100210 Type 302HT 502HT 103HT 203HT 303HT 503HT Type 302HT 502HT 103HT 203HT 303HT 503HT 104HT Temperature /H11034C) Temperature (/H11034C) 1.109 0.7744 0.5513 0.4000 0.2951 0.2210 0.1680 0.1295 0.1142 100 110 120 125 1.849 1.291 0.9189 0.6667 0.4918 0.3683 0.2800 0.2158 0.1903 4.147 3.011 2.224 1.668 1.267 0.9753 7.632 5.380 3.861 2.815 2.083 1.564 1.190 0.9159 0.8067 11.45 8.070 5.792 4.223 3.125 2.346 1.785 1.374 1.210 17.93 12.33 8.588 6.064 4.338 3.142 2.302 1.705 1.472 32.51 21.61 14.66 10.13 7.135 5.111 3.720 2.746 2.371 Unit (k/H9024) 4.0/H110060.1 1.9/H110060.1 4.0/H110060.11.45/H110060.1 2.0/H110060.1 1.75/H110060.1 16.0/H110060.2 7.5/H110060.1 0.2/H110060.05 /H92781.55/H110060.051.5/H110060.1 1.9/H110060.1 4.0/H110060.1 4.0/H110060.1 2.0/H110060.1 3.55/H110060.1 1.55/H110060.1 8.0/H110060.2 0.2/H110060.05 (1.45) 4.1/H110060.1 104HT -TP- 1P : /H110061% 2P : /H110062% HT HTF 9.3/H110060.1 Minimum quantity:3000pcs/reel /H110010.2 /H110020 SURFACE MOUNT TYPE THERMISTOR

0.44/H110060.03 0.22/H110060.03 0.22 /H110060.03 Part number Dimensions FT THERMISTOR The FT thermistors, the highly reliable thermistors, are characterized by their fast response time, which was made possible by the miniaturization of the thermistor dimensions. FT thermistors are also heat-resistant type. FT thermistors are the most excellent products of today,s chip thermistors manufacturing. 364 FT Thin film thermistor Rated zero-power Resistance at 25/H11034C : 364k/H9024 Temperature (/H11034C) Resistance-Temperature /H1100220 /H1100210 100 110 B=3370K 67.26 42.10 27.08 17.86 12.07 10.00 8.332 5.871 4.216 3.081 2.288 1.725 1.318 1.021 0.8003 B=3435K 70.34 43.55 27.71 18.11 12.12 10.00 8.299 5.804 4.139 3.006 2.220 1.666 1.269 0.9797 0.7662 B=3370K 336.3 210.5 135.4 89.31 60.33 50.00 41.66 29.36 21.08 15.40 11.44 8.623 6.592 5.105 4.002 B=3435K 351.9 217.7 138.5 90.48 60.58 50.00 41.50 29.03 20.70 15.04 11.11 8.331 6.344 4.898 3.829 B=3370K 2447 1532 985.4 650.0 439.1 363.9 303.2 213.7 153.4 112.1 83.25 62.76 47.98 37.15 29.12 103FT 503FT 364FT P/N Temperature (/H11034C) 120 125 130 140 150 160 170 180 190 200 210 220 230 240 250 B=3370K 0.6345 0.5671 B=3435K 0.6064 0.5418 B=3370K 3.172 2.836 B=3435K 3.029 2.706 B=3370K 23.09 20.64 18.50 14.97 12.23 10.07 8.364 7.000 5.901 5.008 4.277 3.676 3.177 2.760 2.411 103FT 503FT 364FT P/N Specifications Part No. R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant (s)*3 Operating temp. range (/H11034C) Rated power at 25/H11034C (mW) *1 R25 : Rated zero-power resistance value at 25/H11034C. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. 103FT 103FT 503FT 503FT 364FT 10k /H9024/H110065% 10k/H9024/H110065% 50k/H9024/H110065% 50k/H9024/H110065% 364k/H9024/H110065% 3435K/H110061% 3370K/H110061% 3435K/H110061% 3370K/H110061% 3370K/H110061% 0.3 0.3 0.3 0.3 0.3 2.0 2.0 2.0 2.0 2.0 1.5 1.5 1.5 1.5 1.5 /H1100220/H11011125 /H1100220/H11011125 /H1100220/H11011125 /H1100220/H11011125 /H1100220/H11011250 Unit (mm) (0.5) Glass Unit (k/H9024) Connect the FTs to the electrodes with using conductive epoxy resins. The FTs cannot be soldered onto the electrodes. THIN FILM TYPE THERMISTOR

Chip thermistors are specially processed, highly reliable thermistors. They can be face-bonded to act as thermal compensators for ICs and they are manufactured in sizes down to 1 square mm, they can also be used to detect temperature with relatively small time constants. Precautions Dimensions Reflow soldering profile

103 KT 2125T -

Rated zero-power resistance at 25/H11034C 103:10k/H9024 Part number Chip thermistor Dimension(EIAJ) 2125 Specifications Part No. R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant(s)*3 Operating temp. range( /H11034C) Rated power at 25 /H11034C(mW) *1 R25 : Rated zero-power resistance value at 25/H11034C. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. Other resistance is available, please ask. 103KT2125T 103KT1608T 503KT1608T 104KT1608T 103KT1005T 10k/H9024 10k/H9024 50k/H9024 100k/H9024 10k/H9024 3435K/H110061% 3435K/H110061% 4055K/H110061% 4390K/H110061% 3435K/H110061% 1.0 0.9 0.9 0.9 0.7 7.5 5.0 5.0 5.0 2.2 5.0 4.5 4.5 4.5 3.5 /H1100240/H11011125 /H1100240/H11011125 /H1100240/H11011125 /H1100240/H11011125 /H1100240/H11011125 Unit(mm) 1.65/H110060.2 4.0/H110060.1 4.0/H110060.1 2.0/H110060.05 3.5/H110060.05 1.75/H110060.18.0/H110060.3 1.5max. (0.25max.) ( ):1608type 0.3max. /H110010.1 /H110020 2.4/H110060.2 (1.85/H110060.1) Taping (2125, 1608 type) Do not expose the thermistors to high soldering heat for more than specified time. (260/H11034C for not longer than 10s is recommended) Unit(mm) L W Glass coating Electrode (Sn plated) 190/H11034C /H1100615/H11034C 260/H11034C /H110065/H11034C Temperature Time Soldering CoolingPreheat(air) 120s/H1100630s 1 /H110112 /H11034C/s 10s max. Minimum quantity:4000pcs/reel Minimum quantity:10000pcs/reel Unit(mm) (1005 type) T EIA 0402 0603 0805 EIAJ 1005 1608 2125 L 1.00/H110060.15 1.60/H110060.15 2.00/H110060.20 W 0.50/H110060.10 0.80/H110060.15 1.25/H110060.20 T 0.6max. 0.95max. 1.2max. L 0.15/H110060.30 0.20/H110060.50 0.20/H110060.50 2.0/H110060.05 0.66/H110060.03 0.9max 0.75/H110060.02 4.0/H110060.1 0.6/H110060.10 2.0/H110060.10 1.75/H110060.1 3.5/H110060.05 8.3 max /H92781.5 /H110010.1 01.10/H110060.10 CHIP TYPE THERMISTOR

3/H110061 1.35/H110060.15 48/H110061 Glass Nickel-plated (0.15) (0.18) Part number Time constant Dimensions GT THERMISTOR GT thermistor is combined both superior feature of BT thermistor and ET thermistor as fast response time, high reliability, wide category temperature range, high moisture proof, high accuracy and reasonable price. GT thermistor is made up of a high quality thermistor element and the lead wire is connected to the thermistor element by alloyed technology, and glass coating for the thermistor element.

103 GT 1-

Rated zero-power resistance at 25/H11034C 103 : 10k/H9024 100 95.0 86.5 63.2 0024 6 8 1 0 1 2 (%) Time (s) in air in silicone oil Specifications Part No. R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant(s)*3 Operating temp. range(/H11034C) Rated power at 25/H11034C(mW) 1 R25 : Rated zero-power resistance value at 25/H11034C. 2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. 3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. (silicone oil) 102GT-1 202GT-1 502GT-1 103GT-1 203GT-1 503GT-1 104GT-1 204GT-1 504GT-1 105GT-1 3305K /H110062% 3838K/H110062% 3964K/H110062% 4126K/H110062% 4282K/H110062% 4288K/H110062% 4267K/H110062% 4338K/H110062% 4526K/H110062% 4608K/H110062% 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 7(0.6) 7(0.6) 7(0.6) 7(0.6) 7(0.6) 7(0.6) 7(0.6) 7(0.6) 7(0.6) 7(0.6) /H1100250/H11011200 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 Resistance-Temperature Temperature (/H11034C) Type Unit (k/H9024) 102GT 202GT 502GT 103GT 203GT 503GT 104GT 204GT 504GT 105GT /H1100250 /H1100240 /H1100230 /H1100220 /H1100210 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 32.57 18.48 10.84 6.594 4.144 2.675 1.773 1.203 0.8354 0.5918 0.4273 0.3141 0.2347 0.1782 0.1373 0.1072 111.3 61.34 33.69 18.79 10.82 6.424 3.939 2.489 1.618 1.080 0.7390 0.5170 0.3695 0.2693 0.1998 0.1507 0.1154 342.1 175.4 92.54 50.44 28.49 16.66 10.06 6.264 4.019 2.651 1.792 1.239 0.8753 0.6304 0.4624 0.3450 0.2614 0.2010 0.1566 0.1236 825.1 405.3 206.6 109.9 60.72 34.82 20.66 12.64 7.968 5.164 3.436 2.341 1.631 1.159 0.8391 0.6181 0.4626 0.3514 0.2706 0.2111 0.1666 0.1330 0.1073 1901 909.0 453.2 236.6 128.3 72.32 42.24 25.47 15.82 10.10 6.620 4.444 3.050 2.138 1.527 1.111 0.8209 0.6160 0.4686 0.3613 0.2820 0.2226 0.1777 0.1432 0.1166 4613 2199 1100 576.2 315.1 178.8 104.9 63.52 39.62 25.37 16.64 11.16 7.645 5.338 3.795 2.742 2.014 1.501 1.133 0.8662 0.6704 0.5247 0.4149 0.3314 0.2673 0.2174 0.1784 0.1475 0.1230 0.1032 8743 4218 2132 1127 620.0 353.7 208.6 126.8 79.36 50.96 33.49 22.51 15.44 10.80 7.686 5.556 4.082 3.043 2.298 1.758 1.360 1.064 0.8414 0.6714 0.5408 0.4393 0.3597 0.2969 0.2468 0.2065 0.1740 0.1475 0.1258 0.1079 0.09305 0.08065 8810 4436 2329 1272 720.3 421.8 254.6 158.2 100.8 65.85 43.99 29.98 20.82 14.71 10.57 7.720 5.720 4.296 3.269 2.516 1.958 1.539 1.222 0.9796 0.7919 0.6455 0.5303 0.4389 0.3658 0.3068 0.2591 0.2201 0.1881 0.1616 0.1396 12091 6268 3372 1880 1083 642.3 391.9 245.4 157.5 103.3 69.20 47.23 32.84 23.22 16.68 12.15 8.976 6.719 5.091 3.903 3.024 2.367 1.871 1.492 1.200 0.9726 0.7946 0.6539 0.5418 0.4519 0.3793 0.3203 0.2720 0.2323 6920 3833 2190 1289 780.9 485.2 309.0 201.2 133.6 90.53 62.49 43.90 31.34 22.69 16.65 12.39 9.330 7.107 5.472 4.255 3.339 2.644 2.113 1.702 1.382 1.131 0.9323 0.7735 0.6459 0.5424 0.4583 0.3894 Unit (mm) 1.0k/H9024/H110063% 2.0k/H9024/H110063% 5.0k/H9024/H110063% 10.0k/H9024/H110063% 20.0k/H9024/H110063% 50.0k/H9024/H110063% 100.0k/H9024/H110063% 200.0k/H9024/H110063% 500.0k/H9024/H110063% 1000.0k/H9024/H110063% 0.08483 0.06787 0.05488 0.04483 0.03697 0.03077 0.02584 0.02189 0.01869 0.01610 0.08973 0.07068 0.05638 0.04550 0.03715 0.03065 0.02556 0.02151 0.01826 0.09865 0.07967 0.06501 0.05358 0.04457 0.03741 0.03167 0.02703 0.02324 0.02014 0.01759 0.08741 0.07186 0.05960 0.04986 0.04204 0.03573 0.03059 0.02640 0.09573 0.07929 0.06620 0.05570 0.04722 0.04030 HIGH HEAT-RESISTANCE AND HIGH SENSITIVE THERMISTOR

1.35max. 1.5max. 70min. Glass Glass Part number Dimensions BT THERMISTOR The BT thermistor is a small thermal sensing device providing high reliability, stable characteristics and a wide operating range of /H1100250/H11034C to 300/H11034C. It is used in various applications including medical apparatus, industrial equipment and home electric appliances.

10 BT 5-

Rated zero-power resistance at 25/H11034C 10:10k/H9024 4.5max. 70 min. 3.5max. 0.225/H9278Dumet leads 0.2/H9278Dumet leads Fig.2 (BT-6) Fig.1 (BT-5) Specifications Port No. R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal Time constant(s)*3 Operating temp. range(/H11034C) Rated power at 25/H11034C(mW) *1 R25 : Rated zero-power resistance value at 25/H11034C, /H110065% are also available. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air 1BT-5 2BT-5 5BT-5(6) 9BT-5(6) 10BT-5(6) 20BT-5(6) 30BT-5(6) 40BT-5(6) 100BT-5(6) 400BT-5(6) 500BT-5(6) 1.3MBT-5(6) 1.000k/H9024/H1100610% 2.000k/H9024/H1100610% 5.000k/H9024/H1100610% 9.000k/H9024/H1100610% 10.00k/H9024/H1100610% 20.00k/H9024/H1100610% 30.00k/H9024/H1100610% 40.00k/H9024/H1100610% 100.0k/H9024/H1100610% 400.0k/H9024/H1100610% 500.0k/H9024/H1100610% 1300k/H9024/H1100610% 3,250K/H110063% 3,420K/H110063% 3,450K/H110063% 3,470K/H110063% 3,250K/H110063% 3,330K/H110063% 3,450K/H110063% 3,550K/H110063% 3,750K/H110063% 4,050K/H110063% 3,760K/H110063% 4,380K/H110063% 0.5(0.4) 0.5(0.4) 0.5(0.4) 0.5(0.4) 0.5(0.4) 0.5(0.4) 0.5(0.4) 0.5(0.4) 0.5(0.4) 0.5(0.4) 0.5 0.5 4/H1101112 4/H1101112 4/H1101112(3/H110118) 4/H1101112(3/H110118) 4/H1101112(3/H110118) 4/H1101112(3/H110118) 4/H1101112(3/H110118) 4/H1101112(3/H110118) 4/H1101112(3/H110118) 4/H1101112(3/H110118) 4/H1101112(3/H110118) 4/H1101112(3/H110118) /H1100250/H11011150 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011300 /H1100250/H11011150 2.5 2.5 2.5(2) 2.5(2) 2.5(2) 2.5(2) 2.5(2) 2.5(2) 2.5(2) 2.5(2) 2.5(2) 2.5(2) Temperature (/H11034C) Type Resistance-Temperature /H1100250 /H1100240 /H1100230 /H1100220 /H1100210 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 29.87 17.33 10.35 6.374 4.038 2.629 1.755 1.200 1.000 0.8380 0.5973 0.4338 0.3205 0.2407 0.1834 0.1417 0.1110 0.08789 70.71 40.02 23.28 13.96 8.640 5.513 3.610 2.421 2.000 1.661 1.163 0.8311 0.6043 0.4468 0.3357 0.2559 0.1978 0.1547 0.1224 0.09789 0.07908 0.06450 35.44 21.84 13.87 9.057 6.060 5.000 4.148 2.898 2.065 1.497 1.104 0.8267 0.6280 0.4836 0.3771 0.2975 0.2373 0.1913 0.1556 0.1278 0.1058 0.08836 0.07432 0.06295 344.8 190.3 109.1 64.81 39.70 25.15 16.36 10.92 9.000 7.456 5.200 3.698 2.677 1.970 1.473 1.117 0.8581 0.6685 0.5264 0.4191 0.3369 0.2735 284.8 163.4 97.62 60.41 38.63 25.45 17.22 11.92 10.00 8.434 6.084 4.456 3.303 2.460 1.850 1.405 1.078 0.8355 0.6540 0.5171 0.4126 0.3321 0.2696 0.2207 0.1818 0.1508 0.1258 0.1056 686.7 383.1 222.6 134.2 83.61 53.75 35.53 24.09 20.00 16.70 11.81 8.511 6.248 4.658 3.522 2.698 2.093 1.640 1.296 1.027 0.8190 0.6581 0.5327 0.4345 0.3567 0.2947 0.2451 0.2052 83.80 54.46 36.37 30.00 24.88 17.39 12.40 8.990 6.629 4.962 3.767 2.897 2.255 1.774 1.410 1.130 0.9113 0.7374 0.5997 0.4909 0.4048 0.3360 0.2808 0.2360 0.1995 0.1695 0.1447 0.1243 0.1072 0.09283 0.08078 0.07060 306.8 184.7 115.0 73.88 48.77 40.00 33.00 22.82 16.10 11.57 8.457 6.279 4.730 3.611 2.792 2.182 1.727 1.378 1.107 0.8943 0.7252 0.5915 0.4859 0.4018 0.3344 0.2802 0.2361 0.2000 0.1704 0.1458 0.1255 0.1084 0.09408 0.08200 4860 2599 1439 827.4 491.1 301.4 190.1 123.1 100.0 81.71 55.39 38.31 27.00 19.38 14.14 10.48 7.866 5.968 4.580 3.551 2.782 2.201 1.757 1.416 1.150 0.9418 0.7770 0.6458 0.5403 0.4551 0.3855 0.3286 0.2816 0.2426 0.2100 0.1826 0.1595 1486 945.3 614.7 500.0 408.9 277.7 192.1 135.3 96.90 70.47 52.00 38.90 29.49 22.63 17.55 13.76 10.90 8.717 7.034 5.722 4.692 3.876 3.225 2.702 2.277 1.930 1.644 1.407 1.209 1.041 0.8995 0.7810 8066 4598 2718 1652 1300 1029 656.0 427.8 284.5 193.0 133.0 92.76 65.53 46.91 34.03 25.02 18.59 13.99 10.63 8.163 6.336 4.965 3.926 3.131 2.517 2.039 1.663 1.366 1.129 0.9398 0.7871 0.6628 0.5612 1BT 2BT 5BT 9BT 10BT 20BT 30BT 40BT 100BT 400BT 500BT 1.3MBT 11043 6198 3573 2109 1274 788.4 498.7 400.0 322.4 212.8 143.3 98.24 68.52 48.50 34.91 25.47 18.83 14.10 10.68 8.180 6.332 4.957 3.915 3.120 2.508 2.032 1.658 1.363 1.127 0.9390 0.7864 0.6626 0.5613 0.4780 0.4091 0.3518 Unit(k/H9024)

The CT thermistor is a thermal sensor in a DO35 package. Similar to the BT thermistor, it is highly reliable and offers a wide operating range of /H1100250/H11034 C to 250/H11034C. It is primarily used in home electric appliances and features a competitive price for full-automated manufacturing system.

512 CT-4

Rated zero-power resistance at 25/H11034C 512 : 5.1k/H9024 Part number Dimensions Resistance-Temperature Glass encapsulated0.5/H9278 Nickel-plated 4.0 max. 28/H110061 28/H110061 1.8/H9278 To allow automatic insertion, this product can be taped. Temperature (/H11034C) Type 252CT 512CT 562CT 912CT 103CT 113CT 203CT 473CT 513CT 563CT 104CT 204CT /H1100250 /H1100240 /H1100230 /H1100220 /H1100210 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 120.2 65.60 36.48 20.91 12.32 7.516 4.738 3.074 2.045 1.393 0.9698 0.6895 0.4993 0.3680 0.2757 0.2098 0.1620 0.1267 0.1003 0.08028 0.06494 0.05302 0.04369 0.03630 0.03039 0.02562 137.9 81.02 48.93 30.56 19.65 12.96 8.779 6.080 4.296 3.095 2.267 1.687 1.270 0.9650 0.7402 0.5735 0.4493 0.3559 0.2847 0.2298 0.1870 0.1534 0.1267 0.1055 0.08833 0.07445 151.4 88.96 53.73 33.55 21.58 14.23 9.639 6.676 4.717 3.398 2.489 1.852 1.394 1.060 0.8128 0.6298 0.4933 0.3908 0.3126 0.2524 0.2053 0.1684 0.1391 0.1158 0.09699 0.08175 94.62 58.02 36.67 23.82 15.92 10.91 7.626 5.441 3.952 2.918 2.184 1.656 1.269 0.9787 0.7605 0.5952 0.4702 0.3750 0.3016 0.2444 0.1996 0.1643 0.1362 0.1136 0.09541 0.08063 0.06853 0.05857 0.05031 104.0 63.76 40.29 26.18 17.49 11.99 8.381 5.980 4.342 3.206 2.400 1.820 1.394 1.076 0.8357 0.6540 0.5168 0.4121 0.3314 0.2686 0.2193 0.1805 0.1496 0.1249 0.1049 0.08860 0.07531 0.06436 0.05529 114.4 70.13 44.32 28.79 19.24 13.18 9.219 6.578 4.777 3.527 2.640 2.002 1.534 1.183 0.9193 0.7194 0.5684 0.4533 0.3646 0.2955 0.2413 0.1986 0.1646 0.1374 0.1153 0.09746 0.08284 0.07080 0.06082 81.00 52.63 35.15 24.01 16.74 11.88 8.570 6.239 4.581 3.401 2.553 1.937 1.489 1.156 0.9075 0.7191 0.5752 0.4638 0.3771 0.3091 0.2552 0.2122 0.1777 0.1497 0.1269 0.1082 0.09271 127.1 84.16 56.86 39.01 27.07 19.05 13.58 9.807 7.187 5.327 3.997 3.040 2.337 1.815 1.425 1.129 0.9031 0.7280 0.5919 0.4849 0.4000 0.3324 0.2780 0.2339 0.1979 0.1683 138.0 91.32 61.70 42.33 29.37 20.67 14.74 10.64 7.798 5.781 4.337 3.298 2.535 1.969 1.546 1.226 0.9799 0.7899 0.6422 0.5261 0.4341 0.3607 0.3016 0.2538 0.2147 0.1827 151.5 100.3 67.75 46.47 32.25 22.70 16.18 11.68 8.559 6.348 4.762 3.622 2.784 2.162 1.698 1.346 1.076 0.8674 0.7052 0.5777 0.4766 0.3961 0.3312 0.2787 0.2358 0.2006 272.2 179.4 120.9 83.11 58.23 41.52 30.14 22.19 16.57 12.52 9.586 7.434 5.827 4.619 3.694 2.982 2.428 1.992 1.647 1.371 1.149 0.9697 0.8235 0.7033 0.6038 0.5208 553.6 362.5 242.5 165.7 115.3 81.91 59.14 43.36 32.28 24.33 18.57 14.36 11.24 8.900 7.108 5.732 4.666 3.829 3.168 2.641 2.216 1.871 1.591 1.360 1.169 1.010 Specifications Part No. R 25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant (s)*3 Operating temp. range(/H11034C) Rated power at 25/H11034C(mW) *1 R25 : Rated zero-power resistance value at 25/H11034C. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. 252CT-4 512CT-4 562CT-4 912CT-4 103CT-4 113CT-4 203CT-4 473CT-4 513CT-4 563CT-4 104CT-4 204CT-4 2.5k/H9024/H110065% 5.1k/H9024/H110065% 5.6k/H9024/H110065% 9.1k/H9024/H110065% 10.0k/H9024/H110065% 11.0k/H9024/H110065% 20.0k/H9024/H110065% 47.0k/H9024/H110065% 51.0k/H9024/H110065% 56.0k/H9024/H110065% 100.0k/H9024/H110065% 200.0k/H9024/H110065% 3670K/H110062% 3200K/H110062% 3200K/H110062% 3270K/H110062% 3270K/H110062% 3270K/H110062% 3410K/H110062% 3610K/H110062% 3610K/H110062% 3610K/H110062% 3450K/H110062% 3500K/H110062% 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10/H1101120 10/H1101120 10/H1101120 10/H1101120 10/H1101120 10/H1101120 10/H1101120 10/H1101120 10/H1101120 10/H1101120 10/H1101120 10/H1101120 /H1100250 /H11011250 /H1100250/H11011200 /H1100250/H11011200 /H1100250/H11011250 /H1100250/H11011250 /H1100250/H11011250 /H1100250/H11011250 /H1100250/H11011250 /H1100250/H11011250 /H1100250/H11011250 /H1100250/H11011250 /H1100250/H11011250 Unit(mm) Unit(k/H9024)

The D thermistor, based on resistance changes, is used in transistor, coil and other temperature compensating circuits found in TV,s, radio, etc. 1K D -5 Diameter Disk thermistor Rated zero-power resistance at 25/H11034C 1k:1k/H9024 Part number Dimensions Taping 35 min. 5.0 max.6.0max. Resin Soldered CP wire 3.5/H110061.0 0.5/H9278 6.35/H110061.3 0/H110062.0 6.0 max. 5.0 max. 1.5 max. 20.0/H110011.5 /H110021.0 9.0/H110010.75 /H110020.5 18.0/H110011.0 /H110020.5 5.0/H110010.8 /H110020.2 3.85/H110060.7 12.7/H110060.3 12.7/H110061.0 /H92780.5/H110060.05 11.0 max. 2.0 max 32.25 max. 3.0 max.12.5 min. /H92784.0/H110060.3 4/H110061 16.0/H110060.5 0.535/H110060.2 2,500pcs/box Unit (mm) Unit(mm) Specifications Part No. R25*1 B value*2 Dissipation factor (mW/ /H11034C) Thermal time constant(s)*3 Operating temp. range(/H11034C) Rated power at 25/H11034C(mW) *1 R25 : Rated zero-power resistance value at 25/H11034C, /H1100610% are also available. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. 50D-5 80D-5 100D-5 200D-5 250D-5 300D-5 360D-5 500D-5 800D-5 1KD-5 1.5KD-5 2KD-5 5KD-5 8KD-5 10KD-5 15KD-5 20KD-5 25KD-5 50KD-5 100KD-5 50.0/H9024/H1100615% 80.0/H9024/H1100615% 100.0/H9024/H1100615% 200.0/H9024/H1100615% 250.0/H9024/H1100615% 300.0/H9024/H1100615% 360.0/H9024/H1100615% 500.0/H9024/H1100615% 800.0/H9024/H1100615% 1.0k/H9024/H1100615% 1.5k/H9024/H1100615% 2.0k/H9024/H1100615% 5.0k/H9024/H1100615% 8.0k/H9024/H1100615% 10.0k/H9024/H1100615% 15.0k/H9024/H1100615% 20.0k/H9024/H1100615% 25.0k/H9024/H1100615% 50.0k/H9024/H1100615% 100.0k/H9024/H1100615% 3250K/H110065% 3300K/H110065% 3300K/H110065% 3400K/H110065% 3450K/H110065% 3500K/H110065% 3550K/H110065% 3650K/H110065% 3850K/H110065% 3950K/H110065% 3950K/H110065% 4000K/H110065% 4100K/H110065% 4200K/H110065% 4200K/H110065% 4250K/H110065% 4300K/H110065% 4300K/H110065% 4650K/H110065% 4850K/H110065% 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 297 297 297 297 297 297 297 297 297 297 297 297 297 297 297 297 297 297 297 297 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110 /H1100240/H11011/H11001110

1. Dimensions 27 33 Housing Housing Thermistor Thermistor Thermistor Thermistor Window WindowLead wire Lead wire Evaporator Pipe R4.35 (mm) FROST DETECTING SENSOR FD SENSOR 1. Application Any frost-free system found in domestic and commercial fridge-freezers, vending machines, ice-makers, etc. 2. Features Simple detecting principle Highly sensitive Ease of assembly Replaces less-efficient conventional sensors The FD Sensor has been developed to detect the level of accumulated frost on the evaporator in frost-free systems, such as those found in domestic fridge-freezers. It helps to eliminate unnecessary defrost cycles and also increases the energy efficiency of the system. 4. Findings from studies carried on the FD Sensor 5. Specifications 6. Reliability Climatic test properties 7. Mechanical properties NTC Thermistor characteristics(only for reference) Power Consumption No. of defrost cycle completed Conventional Fixedtime defrost system Defeost system with FD Sensor Improved efficiency 74.16KK Whr/month 65.6KK Whr/month 12% 9 times/week Once/week Criteria Dry heat Test Test Conditions In air at 100/H11034C for 1,000hr. Between /H1100240/H11034C and /H1100175/H11034C for 10,000 cycles. In air at /H1100255/H11034C for 1,000hr. 95% RH at 40/H11034C for 1,000hr. Cold Damp heat Thermal shock Deviation of resistance at 25/H11034C from the original value after test within /H110062% and deviation of B value(B25/H1140885) from the original value after test is within /H110061%. Criteria Free Fall Test Test Conditions 3 natural drops from 75 cm high JIS C2571 Item A

40 N for 10 secondsRobustness of

Deviation of resistance at 25/H11034C from the original value after test within /H110062% and deviation of B value(B25/H1140885) from the original value after test is within /H110061%. Study (A) A 12% of energy saving in a 420 liter domestic frost-free fridge-freezer was found by one of the major Japanese refrigerator manufacturers by the following test procedures. Test Procedure The power consumption measurement was carried out in accordance with /H11033JIS C9607 power consumption test, item B ( ISO8561). The test procedure was extended to one week to determine the full advantage of the defrost system using the FD Sensor. Study (B) Evaluation of the FD Sensor in a 130 liter domestic frost-free fridge-freezer was made by another Japanese refrigerator manufacturer. They obtained an energy saving of over 10% using the same test method as in 5(A) above but including the opening and closing the fridge-freezers doors. Study (C) FD Sensor 1) Environmental Temperature range : /H1100240/H11034C /H11011/H1100180/H11034C 2) Operating temperature range : /H1100240/H11034C /H11011/H110025/H11034C 3) Sensitivity : 4/H11034C /H1101112/H11034C (Difference in temperature measured by both NTC Thermistors when no frost is recognized.) Evaluation of the FD Sensor in a 400 liter domestic frost-free fridge-freezer made by a Japanese refrigerator manufacturer shows an energy saving of over 10%. Measurement of this energy saving was made using the test method specified as in 5(A) above. 1) Nominal Zero power resistance : R25/H1100510k/H9024 /H110063% 2) Rated B value : B25/H1140885/H110053435K /H110061% 3) Absolute difference between the two NTCs : /H110060.2% or /H110060.05/H11034C at 25/H11034C

The TEMPERATURE SENSOR is assembled one with various parts and thermistor devices according to the required applications. lts electric characteristics are the same as those of thermistor devices. Variable type of sensor can be utilized for detecting or controlling temperature because its operating temperature range is wide from /H1100250 to /H11001300/H11034C. Standard TEMPERATURE SENSOR is available in accordance with the applications such as measurements of liquid, atmosphere and surface temperature. External dimensions Fig 1 Fig 2 Fig 3 Fig 5 Fig 4 Fig 6 Fig 7 Fig 8 Fig 10 Fig 9 Fig 11 Fig 12 Fig 13 Fig 15 Fig 14 Unit (mm) THERMISTOR THERMISTOR THERMISTOR THERMISTOR THERMISTOR TAPE RESIN RESIN TUBE LEAD WIRE SHRINK TUBE LEAD WIRE LEAD WIRE LEAD WIRE LEAD WIRE COPPER PLATE EPOXY THERMISTOR LEAD WIRECOPPER PIPE /H92783 /H92783/H92787/H92786 /H92782.4 5 17 EPOXY 3.5 5 5.5max. TUBE /H92785 6.5max. SUS PIPE THERMISTOR LEAD WIRERESIN PIPE THERMISTOR LEAD WIRESUS PIPE EPOXY LEAD WIRE 2.5max. 8max. THERMISTOR SHRINK TUBE LEAD WIRE /H92783.5 7.8 THERMISTOR LEAD WIRETHERMISTORBRASS SCREW M5 LEAD WIRESCREW PT1/8 /H92786 5012 10 5.5 THERMISTOR SUS PIPE LEAD WIRECOPPER CASE 13.3 14 7.5 THERMISTOR TUBETHERMISTOR LEAD WIRE NUT /H92786 /H92784 Specifications Fig Thermal Time constant(s) Air Water Dissipation factor mW/ /H11034C Operating temperature range Application Thermistor /H11002 130 /H11002 /H11002 /H11002 130 260 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 Heater /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 /H11002 1.0 /H11002 /H11002 /H11002 1.2 4.5 1.1 2.7 1.5 2.6 2.6 /H1100230/H11034C /H11011230/H11034C /H1100230/H11034C /H11011105/H11034C /H1100230/H11034C /H11011105/H11034C /H1100230/H11034C /H11011110/H11034C /H1100230/H11034C /H11011110/H11034C /H1100230/H11034C /H11011105/H11034C /H1100230/H11034C /H1101190/H11034C /H1100230/H11034C /H11011105/H11034C /H1100250/H11034C /H11011200/H11034C /H1100250/H11034C /H11011170/H11034C /H1100230/H11034C /H11011100/H11034C /H1100250/H11034C /H11011205/H11034C /H1100230/H11034C /H11011100/H11034C /H1100230/H11034C /H11011105/H11034C /H1100230/H11034C /H11011105/H11034C Surface temp. sensor for OA equipment. Air temp. sensor for general use. Surface temp. sensor for general use. Air temp. sensor for air conditioner. Air temp. sensor for air conditioner. Surface temp. sensor for general use. Surface temp. sensor for rechargeable battery. Water (Oil) temp. sensor for general use. For general use. Inner temp. sensor for general use. Fast response water temp. sensor Surface temp. sensor for cooker. Air temp. sensor for general use. For general use. For general use. BT AT AT AT(ET) AT(ET) AT AT AT(ET, GT) BT GT(AT, ET) ET CT ET AT(ET) AT(ET) /H92783.1/H110010.2 /H110020.1 6.4/H110060.31.9/H110060.3 3.2/H110060.38.8/H110060.4

The POWER THERMISTOR is a device for suppressing inrush current to an electric circuit. Circuits including electric bulbs or capacitors induce a inrush current more than 100 times the normal current when the circuit switch is turned on. The POWER THERMISTOR in the circuits protects electric equipments from being damaged by limiting the inrush current. MARK is a NEW POWER THERMISTOR featuring smaller size and larger energy capacity to meet severe requirements in inrush current suppression. There is the tendency of miniaturization in low power switching power supply, and MARK is effectively applicable for the needs, though the comparatively larger sized fixed resistors (ceramic coat) are used now. Application How to use the power thermistor The power thermistor will suppress inrush current which is caused by a capacitor, filament for a bulb, inverter for fluorescent lamp, a heater and etc., also will control fan motor speed of cooler for electric circuit. Especially MARK was developed to use for power supply of TV, VCR instead of cement resistor. Accordingly, suitable thermistors are 6D-22, 5D-18 and 8D-18, and if we consider in the points of small time constant which means a small size and large effect for suppressive current which means large rated zero-power resistance, 8D-18 is the most suitable one. Use the following circuit in the power supply for 100V and 200V. The most suitable power thermistor for the above circuit is required to fulfill the following terms and conditions. 1. The permissible current at ambient temperature of 55/H11034C should be over 2A. 2. The thermistor resistance for suppressive current which becomes below 30A should be over 4.2 ohm from the under-mentioned formula. /H11002t/H11034 SW VE IO CL Input voltage : AC 100V/H1100610% Steady state current : 2A Capacitor : 2000/H9262F Ambient temperature : Max.55/H11034C Suppressive current : Max.30A at 25/H11034C SW 1 SW 2 C 2 C 1 VE L 2V E/H110031.1 30/H11022/H11005R C /H11001R 25 R C : Internal resistance value in the circuit is 1 ohm (100V/100A) R 25 : Rated zero-power resistance at 25/H11034C 3. Max. capacitance shall be over 2000/H9262F at AC 100V. SW 2 : ON (200V), OFF (100V) /H11002t/H11034 /H11002t/H11034

If ambient temperature of a thermistor is changed to T1 from T2 suddenly, temperature of the thermistor changes slowly. The time constant means the time when temperature of the thermistor reaches 63% of the temperature difference. Maximum permissible current If the maximum permissible current flows to a thermistor at 25/H11034C, temperature of the thermistor rises to 200/H11034C, (160/H11034C). When ambient temperature is above 25/H11034C, the maximum permissible current shall be over reduced as the maximum permissible current reduction curve. Reliability tests Dry heat test MARK Test sample is exposed in air at 200/H11034C for 1,000 hours. /H9004R25/R25 /H1100620% Damp heat test Test sample is exposed in atmosphere of 95%RH at 40/H11034C for 1,000 hours. /H9004R25/R25 /H1100610% Load test Test sample is applied the maximum rating current in air at 25/H11034C for 1,000 hours. /H9004R25/R25 /H1100620% Change of temperature Test sample is given 10 times of the following temperature cycle, /H1100240/H11034C for 30 minutes room temperature for 5 minutes 200/H11034C for 30 minutes room temperature for 5 minutes. /H9004R25/R25 /H1100610% Residual resistance If current is flowed through a thermistor, any heat will be generated in the thermistor by which its resistance will be decreased, however, a decrease of a resistance will be stabilized at a saturation resistance value which is determined by impressed electric power and a dissipation constant. The residual resistance value means maximum saturation resistance value when the maximum permissible current is flowed through the thermistor. Temperature coefficient The temperature coefficient of a thermistor is expressed by the following equation ; Dissipation factor If small voltage is applied to a thermistor, small current will flow which produce enough heat in the thermistor. Dissipation factor is electric power which make 1/H11034C raise by heat in a thermistor. Resistance-temperature characteristics The theoretical characteristics of a thermistor is expressed by following equation. P is applied electric power. /H9004t is rised temperature of the thermistor. New Power Thermistor MARK 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 Ambient temperature (/H11034C) Current derating ratio Power Thermistor 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 2010 /H1100210 0 30 40 50 60 70 80 90 100 110 120 130 140 150 160 Ambient temperature (/H11034C) Temperature (/H11034C) Resistance change ratio Current derating ratio D TYPE W TYPE B /H11002/H11005exp B T1 R 1 R 1 is the zero-power resistance at absolute temperature T1 R 2 is the zero-power resistance at absolute temperature T2 R 2 /H11005(mW/ /H11034C)/H9254/H9004t P MARK B : 3150K Dry heat test POWER THERMISTOR Test sample is exposed in air at 160/H11034C for 1,000 hours. /H9004R25/R25 /H1100610% Damp heat test Test sample is exposed in atmosphere of 95%RH at 40/H11034C for 1,000 hours. /H9004R25/R25 /H1100610% Load test Test sample is applied the maximum rating current in air at 25/H11034C for 1,000 hours. /H9004R25/R25 /H1100610% Change of temperature Test sample is given 10 times of the following temperature cycle, /H1100230/H11034C for 30 minutes room temperature for 5 minutes 160/H11034C for 30 minutes room temperature for 5 minutes. /H9004R25/R25 /H1100610% B is constant which depends on the material used to make the thermistor. Unless otherwise specified, all values of B are determined from measurements made at 25/H11034C and 85/H11034C. 200 0.01 0.1 1.0 100 160 100 50 25 /H11002250 Temperature (/H11034C) Resistance change ratio MARK B : 2900K 200 0.01 0.1 1.0 100 160 100 50 25 /H11002250 Temperature (/H11034C) Resistance change ratio Power Thermistor B : 3250K 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10.0 20.0 160 100 50 25 /H11002300 /H11022/H11005 /H11022/H11005 /H11022/H11005 /H11022/H11005 /H11022/H11005 /H11022/H11005 /H11022/H11005 /H11022/H11005

5 D 11 T3C (F2)-

Shape D : Disk type Element diameter : /H927811 Resistance at 25/H11034C : 5/H9024 Washer type 4W 2 5- Shape W : Washer type Element diameter : /H927825 Resistance at 25/H11034C : 4/H9024 D F h L d d DT H25 min. T 5D-11 DU /H9278 0.8 Tin-plated copper wire 5D-11 DU 1. Straight lead type 2. Forming lead type W W 0 W 1 W 2 L H 1 P PO /H9278D 0 t /H9004h 28 max. 29 max. (11) 23 max. /H9278 3/H110035 35 max. (12) Disk typeDisk type Washer type UL approved (Disk type) File No. E92669 Thermistor type device Canadian Standards (Disk type) File No. CA97673-1 Class 7950 30 NTC Thermistor Part No. R 25 (/H9024) B value B25/85 (K) Dissipation factor (mW/ /H11034C) Specifications(Disk type) Maximum energy J (W s) Maximum rating current at 25/H11034C (A) Residual resistance (/H9024) Thermal time constant (s) Rating temp (/H11034C) Maximum capacitance (/H9262F) 3D-22 4D-22 6D-22 4D-18 5D-18 8D-18 10D-18 5D-13 8D-13 16D-13 5D-11 8D-11 10D-11 10D-9 16D-9 22D-7 3/H1100615% 4/H1100615% 6/H1100615% 4/H1100615% 5/H1100615% 8/H1100615% 10/H1100615% 5/H1100615% 8/H1100615% 16/H1100615% 5/H1100615% 8/H1100615% 10/H1100615% 10/H1100615% 16/H1100615% 22/H1100615% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 3250/H110065% 40.0 50.0 80.0 9.0 11.0 18.0 22.0 4.0 6.0 12.0 4.0 6.0 7.0 2.0 4.0 1.0 5.4 4.7 3.9 4.1 3.8 3.1 2.8 3.4 2.7 1.9 3.3 2.6 2.4 2.2 1.7 1.4 0.137 0.182 0.274 0.182 0.228 0.365 0.456 0.228 0.365 0.730 0.228 0.365 0.456 0.456 0.730 1.003 29.8 30.7 32.4 22.8 24.6 27.2 28.2 20.1 20.3 21.4 19.0 19.8 20.1 17.2 17.4 15.7 130 160 220 100 120 150 150 105 8,500 11,000 17,000 2,000 2,500 4,100 5,000 900 1,400 2,800 900 1,400 1,800 510 820 310 5,900 7,600 11,800 1,350 1,700 2,800 3,400 620 970 1,900 620 970 1,250 350 560 210 1,470 1,900 2,950 340 430 710 860 150 240 480 150 240 310 140 1,700 2,200 3,500 410 510 840 1,030 180 280 570 180 280 370 100 160 AC100V AC120V AC220V AC240V /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 /H1100230/H11011160 Taping D-7 D-9 D-11 D-13 15/H110061 30/H110061 9/H110060.5 P P0 P1 W W 0 W 1 W 2 H 1 L F1 /H9278D 0 tt 1 /H9004h D-7 D-9 D-11 D-13 D-18 D-22 9.5max. 11max. 14max. 16max. 21max. 25max. 8max. 9max. 8max. 13max. 15max. 18max. 20max. 26max. 30max. 15max. 17max. 20max. 22max. 28max. 32max. 3/H110060.2 6/H110061 3.5/H110060.5 7.5/H110061 10/H110061 5max. 6max. D T Hh FL d AC100V AC120V AC220V AC240V Part No. R 25 (/H9024) B value B25/85 (K) Dissipation factor (mW/ /H11034C) Specifications(Washer type) Maximum enegy J (W s) Maximum rating current at 25/H11034C (A) Residual resistance (/H9024) Thermal time constant (s) Rating temp (/H11034C) Maximum capacitance (/H9262F) *4 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. 6W-22 4W-25 6.0/H1100615% 3250/H110065% 3250/H110065%4.0/H1100615% 6.1 7.8 0.153 0.102 34.0 36.2 220 160 /H1100230/H11011200 /H1100230/H11011200 17,000 11,800 3,500 2,950 11,000 7,600 2,200 1,900 *1 *2 *3 *4 *1 R25 : Rated zero-power resistance value at 25/H11034C. *2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. *3 Residual resistance is the maximum value when maximum rating current is applied. Forming lead Taping *1 *2 *3 *4 Unit (mm) Unit (mm) Unit (mm)

Element diameter : /H92787 Mark Resistance at 25/H11034C : 5.1/H9024 1. Straight lead type W W 0 W 1 W 2 L H 1 P PO /H9278D 0 t /H9004h UL approved File No. E92669 Thermistor type devices DD 25 min. 25min. 3.0 min. dd H 0 H5R110 5R110 D 3.0 min. d H 0 5R110 T 3.5/H110060.75 Part No. R 25 (/H9024) B value B25/85 (K) Dissipation factor (mW/ /H11034C) Specifications(Disk type) Maximum energy J (W .s) Maximum rating current at 25/H11034C (A) Residual resistance (/H9024) Thermal time constant (s) Rating temp (/H11034C) Maximum capacitance (/H9262F) AC100V AC120V AC220V AC240V 5.1/H1100610% 8.2/H1100610% 10.0/H1100610% 12.0/H1100610% 16.0/H1100610% 22.0/H1100610% 2.2/H1100610% 3.0/H1100610% 3.9/H1100610% 5.1/H1100610% 8.2/H1100610% 10.0/H1100610% 1.0/H1100610% 2.0/H1100610% 3.0/H1100610% 3.9/H1100610% 5.1/H1100610% 3150/H110065% 3150/H110065% 3150/H110065% 4.6 3.6 3.3 3.6 3.1 2.6 7.4 6.4 5.6 5.7 4.5 4.1 11.9 8.6 8.3 7.4 6.5 0.18 0.30 0.36 0.24 0.43 0.59 0.08 0.11 0.11 0.14 0.22 0.27 0.04 0.07 0.08 0.08 0.14 17.0 17.2 17.2 17.5 17.8 18.0 18.9 19.2 19.5 19.2 19.9 20.1 22.0 23.4 23.6 24.5 24.7 2900 /H110065% 3150/H110065% 3150/H110065% 2900/H110065% 3150/H110065% 2900/H110065% 2900/H110065% 2900/H110065% 2900/H110065% 3150/H110065% 3150/H110065% 3150/H110065% 2900/H110065% 2900/H110065% 110 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 /H1100240/H11011200 270 380 470 380 550 660 1,130 1,190 1,300 1,000 1,080 1,130 2,580 2,900 2,130 2,360 2,500 110 140 110 160 190 330 350 380 290 320 330 760 860 630 700 740 110 130 160 280 290 320 250 270 280 640 720 530 590 620 M5R107 M8R207 M10007 M12007 M16007 M22007 M2R210 M3R010 M3R910 M5R110 M8R210 M10010 M1R014 M2R014 M3R014 M3R914 M5R114 2.0 2.8 3.4 3.6 4.0 4.8 8.2 8.6 8.0 7.2 7.8 8.2 18.0 21.0 15.0 17.0 18.0 400 560 680 560 800 960 1,640 1,720 1,880 1,440 1,560 1,640 3,720 4,200 3,080 3,400 3,600 Taping P P0 P1 W W 0 W 1 W 2 H 1 L F1 /H9278D 0 tt 1 /H9004h D T HH 0 d M ...07 M ...10 M ...14 7.5/H110061 9.5max. 13max. 17max. 12max. 17max. 20.5max. 15max. 19.5max. 22.5max. 6max. /H110061 30/H110061 M ...07 M ...10 M ...14 1 R25 : Rated zero-power resistance value at 25/H11034C. 2 B value : determined by rated zero-power resistance at 25/H11034C and 85/H11034C. C : Clinch lead D : Straight lead CS : Clinch short Taping 2. Clinch lead type 3. Clinch short lead type Lead wire /H92780.8 Tinned copper wire Residual resistance is the maximum value when maximum rating current is applied. *1 *2 *3 *4 4 Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air.

5 D2 - 07 CS

1. Straight lead type UL approved File No. E92669 Thermistor type devices DD 20 min. 20min. 1.0 min. dd H 0 H5D210 D 1.0 min. d H 0 T 3.5/H110060.75 D T HH 0 d D2-05 D2-07 D2-10 D2-14 5.0 /H110061 5.0/H110061 5.0/H110061 7.5/H110061 7/H110062 9/H110062 11/H110062 15/H110062 14.0max. 15.0max. 19.5max. 22.5max. 6.8max. 1 R25 : Rated zero-power resistance value at 25/H11034C. K C : Clinch lead Lead -wire form D : Straight lead CS : Clinch short Resistance tolerance 2. Clinch lead type 3. Clinch short lead type /H92780.8 tinned copper wire Residual resistance is the maximum value when maximum rating current is applied. Time when thermistor temperature reaches 63.2% of the temperature difference. The value is measured in the air. Part No. R 25 (/H9024) Dissipation factor (mW/ /H11034C) Specifications(Disk type) Maximum rating current at 25/H11034C (A) Residual resistance (/H9024) Thermal time constant (s) Rating temp (/H11034C) Maximum capacitance at AC220V (/H9262F) 1.7 1.3 1.2 1.4 1.2 2.4 3.0 2.0 2.0 1.7 2.0 1.0 5.0 4.0 4.0 3.0 3.0 1.8 1.6 5.0 5.0 5.0 4.0 2.5 2.2 2.0 1.8 0.610 0.970 1.210 0.860 1.150 0.370 0.352 0.562 0.706 0.780 1.125 1.547 0.107 0.160 0.267 0.427 0.533 0.780 0.940 0.107 0.160 0.213 0.267 0.470 0.590 0.710 0.940 110 105 115 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 /H1100240/H11011160 110 140 160 190 330 350 290 320 330 173 173 860 630 700 740 289 371 454 578 5D2-05 8D2-05 10D2-05 12D2-05 16D2-05 3D2-07 5D2-07 8D2-07 10D2-07 12D2-07 16D2-07 22D2-07 2D2-10 3D2-10 5D2-10 8D2-10 10D2-10 12D2-10 16D2-10 2D2-14 3D2-14 4D2-14 5D2-14 8D2-14 10D2-14 12D2-14 16D2-14 *1 *2 *3 L :/H1100615% K : /H1100610% 5D210 5D210 9/H110062 11/H110062 15/H110062 19/H110062

Z1 type VRD has bipolar electrical characteristics. Maximum ratings Peak pulse power:250 W(10/1000/H9262s) 3.00 kW(8/20/H9262s) Steady state power dissipation:500 mW Operating and storage temperature :/H1100240/H11034C to 125/H11034C Symbol mark 25 min. 6/H110060.3 /H92783.6/H110060.3 Epoxy resin /H92780.8 Soldered copper leads Type No. Lot No. Z2 type VRD has bipolar or unipolar electrical characteristics. Maximum ratings Peak pulse power:500 W (10/1000/H9262s) 6.00 kW (8/20/H9262s) Steady state power dissipation:1W Operating and storage temperature :/H1100240/H11034C to 125/H11034C Symbol mark 25 min. 6/H110060.3 /H92783.6/H110060.3 Epoxy resin /H92780.8 Soldered copper leads Type No. Lot No. Bi-polar type Stand-off voltage VS V Maximum leakage current IL /H9262A Breakdown voltage VB V Test current IT mA Maximum clamping voltage & Maximum peak pulse current 10/1000/H9262s 8/20/H9262s Max. temp. coef. %/ /H11034CVC V VC V Ip A Ip A Capacitance (TYP) pF Z1015 Z1018 Z1022 Z1027 Z1033 Z1039 Z1047 Z1056 Z1068 Z1082 Z1100 Z1120 Z1150 12.1 14.5 17.8 21.8 26.8 31.6 38.1 45.4 55.1 66.4 81.0 97.0 121.0 13.5-16.5 16.2-19.8 19.8-24.2 24.3-29.7 29.7-36.3 35.1-42.9 42.3-51.7 50.4-61.6 61.2-74.8 73.8-90.2 90.0-110 108-132 135-165 22.0 26.5 31.9 39.1 47.7 56.4 67.8 80.5 98.0 118.0 144.0 173.0 215.0 11.3 9.43 7.83 6.39 5.24 4.43 3.69 3.10 2.55 2.14 1.73 1.44 1.16 28.4 34.0 41.2 50.5 61.7 73.0 88.0 105.0 127.0 153.0 187.0 222.0 277.0 106. 89.1 73.5 60.0 49.1 41.5 34.4 28.8 23.8 19.8 16.2 13.6 10.9 0.075 0.079 0.082 0.085 0.087 0.090 0.092 0.094 0.096 0.099 0.101 0.103 0.105 450 360 290 240 200 170 140 110 Bi-polar type Uni-polar type Stand-off voltage Vs V Maximum leakage current IL /H9262A Breakdown voltage VB V Test current IT mA Maximum clamping voltage & Maximum peak pulse current 10/1000/H9262s 8/20/H9262s VC V VC V Ip A Ip A /H11002 Z2010 /H11002 Z2012 /H11002 Z2015 /H11002 Z2018 /H11002 Z2022 /H11002 Z2027 /H11002 Z2033 /H11002 Z2039 /H11002 Z2047 /H11002 Z2056 /H11002 Z2068 /H11002 Z2082 /H11002 Z2100 /H11002 /H11002Z2120 /H11002 Z2150 /H11002 Z2180 /H11002 Z2008U /H11002 Z2010U /H11002 Z2012U /H11002 Z2015U /H11002 Z2018U /H11002 Z2022U /H11002 Z2027U /H11002 Z2033U /H11002 Z2039U /H11002 Z2047U /H11002 Z2056U /H11002 Z2068U /H11002 Z2082U /H11002 Z2100U /H11002 Z2120U /H11002 Z2150U /H11002 Z2180U 6.63 8.10 8.10 9.72 9.72 12.1 12.1 14.5 14.5 17.8 17.8 21.8 21.8 26.8 26.8 31.6 31.6 38.1 38.1 45.4 45.4 55.1 55.1 66.4 66.4 81.0 81.0 97.2 97.2 121.0 121.0 146.0 146.0 500 100 7.38-9.02 9.00-11.0 9.00-11.0 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 16.2-19.8 16.2-19.8 19.8-24.2 19.8-24.2 24.3-29.7 24.3-29.7 29.7-36.3 29.7-36.3 35.1-42.9 35.1-42.9 42.3-51.7 42.3-51.7 50.4-61.6 50.4-61.6 61.2-74.8 61.2-74.8 73.8-90.2 73.8-90.2 90.0-110 90.0-110 108-132 108-132 135-165 135-165 162-198 162-198 12.5 15.0 15.0 17.3 17.3 22.0 22.0 26.5 26.5 31.9 31.9 39.1 39.1 47.7 47.7 56.4 56.4 67.8 67.8 80.5 80.5 98.0 98.0 118.0 118.0 144.0 144.0 173.0 173.0 215.0 215.0 258.0 258.0 40.0 33.4 33.4 28.9 28.9 22.7 22.7 18.8 18.8 15.7 15.7 12.8 12.8 10.5 10.5 8.86 8.86 7.37 7.37 6.21 6.21 5.10 5.10 4.24 4.24 3.47 3.47 2.89 2.89 2.32 2.32 1.94 1.94 16.3 19.5 19.5 22.7 22.7 28.4 28.4 34.0 34.0 41.2 41.2 50.5 50.5 61.7 61.7 73.0 73.0 88.0 88.0 105.0 105.0 127.0 127.0 153.0 153.0 187.0 187.0 222.0 222.0 277.0 277.0 333.0 333.0 372 311 311 267 267 213 213 178 178 147 147 120 120 98.2 98.2 83.0 83.0 68.9 68.9 57.7 57.7 47.7 47.7 39.6 39.6 32.4 32.4 27.3 27.3 21.9 21.9 18.2 18.2 NOTE: Nonsuffix:bi-polar, suffix"U" : uni-polar. Cathode mark(Uni-polar) Bi-polar Uni-polar Max. temp. coef. %/ /H11034C Capacitance (TYP) pF 0.063 0.055 0.071 0.066 0.074 0.075 0.079 0.079 0.083 0.082 0.086 0.085 0.089 0.087 0.092 0.090 0.095 0.092 0.097 0.094 0.099 0.096 0.100 0.099 0.102 0.101 0.104 0.103 0.106 0.105 0.107 0.106 0.108 1200 2400 950 1900 790 1580 640 1280 520 1040 420 840 340 680 280 560 240 480 200 400 160 320 130 260 110 220 180 150 120 Unit (mm) Unit (mm)

Peak pulse power:1.5kW(10/1000/H9262s) 18.0kW (8/20/H9262s) Steady state power dissipation:2W Operating and storage temperature :/H1100240/H11034C to 125/H11034C Symbol mark 24 min. 9/H110060.5 /H92785.3/H110060.5 Epoxy resin /H92781.0 Soldered copper leads Type No. Lot No. Low capacitance type Z6 type VRD has bipolar or unipolar electrical characteristics. Maximum ratings Reverse voltage:200 VDC Peak pulse power:250 W(10/1000/H9262s) 3.00 kW (8/20/H9262s) Steady state power dissipation:500 mW Operating and storage temperature :/H1100240/H11034C to 125/H11034C Symbol mark 25 min. 6/H110060.3 /H92783.6/H110060.3 Epoxy resin /H92780.8 Soldered copper leads Type No. Lot No. Cathode mark Cathode mark(Uni-polar) /H11002 Z6010 /H11002 Z6012 /H11002 Z6015 /H11002 Z6018 /H11002 Z6022 /H11002 Z6027 /H11002 Z6033 /H11002 Z6039 /H11002 Z6047 /H11002 Z6056 /H11002 Z6068 /H11002 Z6082 /H11002 Z6100 /H11002 Z6120 /H11002 /H11002 Z6008U /H11002 Z6010U /H11002 Z6012U /H11002 Z6015U /H11002 Z6018U /H11002 Z6022U /H11002 Z6027U /H11002 Z6033U /H11002 Z6039U /H11002 Z6047U /H11002 Z6056U /H11002 Z6068U /H11002 Z6082U /H11002 Z6100U /H11002 Z6120U Z6150U 16.3 19.5 19.5 22.7 22.7 28.4 28.4 34.0 34.0 41.2 41.2 50.5 50.5 61.7 61.7 73.0 73.0 88.0 88.0 105.0 105.0 127.0 127.0 153.0 153.0 187.0 187.0 222.0 222.0 277.0 1120 933 933 802 802 641 641 535 535 442 442 360 360 295 295 249 249 207 207 173 173 143 143 119 119 97.3 97.3 82.0 82.0 65.7 6.63 8.10 8.10 9.72 9.72 12.1 12.1 14.5 14.5 17.8 17.8 21.8 21.8 26.8 26.8 31.6 31.6 38.1 38.1 45.4 45.4 55.1 55.1 66.4 66.4 81.0 81.0 97.2 97.2 121.0 500 200 7.38-9.02 9.00-11.0 9.00-11.0 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 16.2-19.8 16.2-19.8 19.8-24.2 19.8-24.2 24.3-29.7 24.3-29.7 29.7-36.3 29.7-36.3 35.1-42.9 35.1-42.9 42.3-51.7 42.3-51.7 50.4-61.6 50.4-61.6 61.2-74.8 61.2-74.8 73.8-90.2 73.8-90.2 90.0-110 90.0-110 108-132 108-132 135-165 12.5 15.0 15.0 17.3 17.3 22.0 22.0 26.5 26.5 31.9 31.9 39.1 39.1 47.7 47.7 56.4 56.4 67.8 67.8 80.5 80.5 98.0 98.0 118.0 118.0 144.0 144.0 173.0 173.0 215.0 120 100 100 86.7 86.7 68.2 68.2 56.6 56.6 47.0 47.0 38.5 38.4 31.4 31.4 26.6 26.6 22.1 22.1 18.6 18.6 15.3 15.3 12.7 12.7 10.4 10.4 8.67 8.67 6.98 ZD015 ZD018 ZD022 ZD027 ZD033 ZD039 ZD047 ZD056 ZD068 12.8-17.2 15.3-20.7 18.7-25.3 23.0-31.0 28.1-37.9 33.2-44.8 40.0-54.0 47.6-64.4 57.8-78.2 11.4 13.7 16.8 20.6 25.2 29.8 35.9 42.8 52.0 24.0 28.0 33.2 40.0 48.6 57.4 68.5 81.0 98.0 10.4 8.93 7.53 6.25 5.14 4.35 3.65 3.08 2.55 31.0 36.0 43.0 52.0 63.0 74.0 89.0 106.0 127.0 96.7 83.3 69.7 57.7 47.6 40.5 33.7 28.6 23.8 0.075 0.079 0.082 0.085 0.087 0.090 0.092 0.094 0.096 Bi-polar Uni-polar Bi-polar type Uni-polar type Stand-off voltage Vs V Maximum leakage current IL /H9262A Breakdown voltage VB V Test current IT mA Maximum clamping voltage & Maximum peak pulse current 10/1000/H9262s 8/20/H9262s VC V VC V Ip A Ip A NOTE : Nonsuffix : Bi-polar, suffix "U" : Uni-polar. Max. temp. coef. %/ /H11034C Capacitance (TYP) pF 0.063 0.055 0.071 0.066 0.074 0.075 0.079 0.079 0.083 0.082 0.086 0.085 0.089 0.087 0.092 0.090 0.095 0.092 0.097 0.094 0.099 0.096 0.100 0.099 0.102 0.101 0.104 0.103 0.106 0.107 14600 5600 11200 4400 8800 3300 6600 2700 5400 2400 4400 1700 3300 1400 2800 1200 2400 1000 2000 850 1700 720 1440 610 1220 520 1040 440 880 720 Stand-off voltage VS V Maximum leakage current IL /H9262A Breakdown voltage VB V Test current IT mA Maximum clamping voltage & Maximum peak pulse current 10/1000/H9262s 8/20/H9262s Max. temp. coef. %/ /H11034CVC V VC V Ip A Ip A Capacitance (TYP) pF VRD type No. 31.5 31.0 29.0 28.2 27.2 26.3 25.0 24.1 22.0 Unit (mm) Unit (mm)

Nil : Bi-Polar U : Uni-Polar D : High-Reverse voltage type Break down voltage Steady state power SMD type Part number Dimensions Taping Marking 4.3/H110060.2 4.7/H110060.3 1.2/H110060.2 1.2 /H110060.2 0.2 2.0/H110060.3 0.1 max. 1.5/H110060.2 2.5/H110060.2 Symbol Mark 012 5AA S Mark Part No. Lot No. /H9278D 0 AB /H9278D 1 P1 P2 P0 T1 T2/H9278D 0 /H9278D 1EFWBA 3.0 /H110060.1 5.2 /H110060.1 12.0 /H110060.3 5.5 /H110060.05 1.75 /H110060.1 4.0 /H110060.1 2.0 /H110060.1 4.0 /H110060.1 1.5 /H110010.1 /H110020 1.5 /H110010.2 /H110020 0.3 /H110060.05 (2.6) Unit (mm) P2 P0 W FE Dimension of reel W 1A /H9278178 /H110062.0 B /H927880 /H110061.0 C /H927813 /H110060.5 D /H927821 /H110060.8 E 2.0 /H110060.5 W 14.0 /H110061.5 r (1.0) 1.5 /H110010.5 /H110021.0 Unit (mm) E C Dr A W Minimum quantity : 1500 / reel W 1 B Steady state power dissipation Peak pulse power Storage temp. range Maximum Rating 1.0W 300W(10/1000/H9262s) 1200W(1.2/50/H9262s) 2000W(8/20/H9262s) /H1100240/H11011150/H11034C Part No. Breakdown voltage Stand-off voltage Temperature coefficient CapacitanceMaximum leakage current Maximum clamping voltage & Maximum peak pulse current VB It/H110051mA V VS VS D.C. V IL max /H9262A 10/1000/H9262s 8/20/H9262s VC max/Ipp V VAA pF C 25/H11034C /H1101150/H11034C %/ /H11034C Specifications ZS type ZS1012 ZS1015 ZS1018 ZS1022 ZS1027 ZS1033 ZS1039 ZS1047 12(10.8 /H1101113.2) 9.72 12.1 14.5 17.8 21.8 26.8 31.6 38.1 17.3 22.0 26.5 31.9 39.1 47.7 56.4 67.8 17.3 13.6 11.3 9.40 7.67 6.29 5.32 4.42 22.4 28.5 34.4 41.4 50.7 61.8 73.1 88.0 89.3 70.2 58.1 48.3 39.4 32.4 27.4 22.7 0.066 0.075 0.079 0.082 0.085 0.087 0.090 0.092 551 465 376 299 248 198 164 137 Part No. Breakdown voltage Stand-off voltage Temperature coefficient Capacitance (TYP) Maximum leakage current Maximum clamping voltage & Maximum peak pulse current VB It/H110051mA V VS VS D.C. V IL max /H9262A 10/1000/H9262s 8/20/H9262s VC max/Ipp V VAA pF C 25/H11034C /H1101150/H11034C %/ /H11034C ZS1012D ZS1015D ZS1018D ZS1022D ZS1027D ZS1033D ZS1039D ZS1047D 12(10.8 /H1101113.2) 9.72 12.1 14.5 17.8 21.8 26.8 31.6 38.1 17.3 22.0 26.5 31.9 39.1 47.7 56.4 67.8 17.3 13.6 11.3 9.40 7.67 6.29 5.32 4.42 22.4 28.5 34.4 41.4 50.7 61.8 73.1 88.0 89.3 70.2 58.1 48.3 39.4 32.4 27.4 22.7 0.066 0.075 0.079 0.082 0.085 0.087 0.090 0.092 30.2 29.1 28.2 27.3 26.4 25.5 24.8 24.0 ZS-D type ZS-U type Part No. Breakdown voltage Stand-off voltage Temperature coefficient CapacitanceMaximum leakage current Maximum clamping voltage & Maximum peak pulse current VB It/H110051mA V VS VS D.C. V IL max /H9262A 10/1000/H9262s 8/20/H9262s VC max/Ipp V VAA pF C 25/H11034C /H1101150/H11034C %/ /H11034C ZS1012U ZS1015U ZS1018U ZS1022U ZS1027U ZS1033U ZS1039U ZS1047U 12(10.8 /H1101113.2) 9.72 12.1 14.5 17.8 21.8 26.8 31.6 38.1 17.3 22.0 26.5 31.9 39.1 47.7 56.4 67.8 17.3 13.6 11.3 9.40 7.67 6.29 5.32 4.42 22.4 28.5 34.4 41.4 50.7 61.8 73.1 88.0 89.3 70.2 58.1 48.3 39.4 32.4 27.4 22.7 0.066 0.075 0.079 0.082 0.085 0.087 0.090 0.092 1,102 929 751 598 497 395 328 274 SMD VRD Unit(mm) 012 5AA S Mark Cathode Mark S Mark Cathode Mark Part No. Lot No. Symbol Mark 012 5AA Part No. Lot No. Symbol Mark ZS type ZS-U type ZS-D type career tape cover tape (TYP) (TYP)

CRD is a diode which supplies constant current to an electric circuit, even when power supply voltage fluctuations or load impedance fluctuations occur. CRD is used for current stabilization and current limiting. 1.8/H110060.2 0.5/H110060.1/H92781.35/H110060.1 0.30.3 Solder-plated electrode Solder-plated electrode (Cathode mark) Band 1 Black Band 3 Band 2 Glass sleeve 3.5/H110060.2 3.9/H110060.326 min. Cathode band Anode /H11001 Cathode Mark /H11002 Unit(mm) F type E type 100V Voltage (V) VB10VVK VR IR IP 0.8 IP Current (mA) Explanation of terms IP :Pinch-off current at 10V VK:Voltage which produces 0.8Ip or greater current V B:Breakdown voltage IR :Permitted reverse current Basic characteristics Taping Specifications There are three Types for taping. Minimum taping quantity for Type 2 4000pcs Type 3 2500pcs Maximum ratings Maximum rating voltage Rating power Thermal resistance Reverse current Operating temp E101L /H11011E-562 E-822 E-103 E-123 E-153 Voltage 100V E type 300mW 300/H11034C/ W F type 400mW 150/H11034C/ W /H1100230/H11034C /H11011150/H11034C 50mA F101L/H11011F-562 F-822 F-103 F-123 F-153 Voltage 100V Type 1 Type 3 20/H110060.5 0/H110062 3/H110060.5 6.35/H110060.5 26.3/H110060.5 13/H110062 5/H110060.812.7/H110060.3 /H92784.0/H110060.3 0.2/H110060.05 1.7/H110060.1 1.7/H110060.1 4.0/H110060.1 4.0 /H110060.1 2.0/H110060.05 Insulation 2.75 max. /H110011.0 /H110020.5 /H92781.5/H110010.1 /H110020 Type 2 3/H11034 3/H11034 Pulling direction Part retaining square hole Feeding round hole 8.0/H110060.3 1.75/H110060.1 3.5 /H110060.053.7 /H110060.1 Unit(mm) Unit(mm) Unit(mm) *In principal elements are set with cathode side on the round hole side. 5/H110060.5 6/H110060.1 1.2 max. 1 max. L1/H11002L2 /H110211.5 26 or 52 *1,*2 Pinch-off current limiting current are measured by impulse wave at 25/H11034C *3 ZT is minimum AC impedance when small AC signal voltage of 10KHz is added tc 25 VDC bias. ZT is used as the reference value. *4 Temperature coefficient is measured between 25/H11034C and 50/H11034C. F-101L F-101 F-301 F-501 F-701 F-102 F-152 F-202 F-272 F-352 F-452 F-562 F-822 F-103 F-123 F-153 E-101L E-101 E-301 E-501 E-701 E-102 E-152 E-202 E-272 E-352 E-452 E-562 E-822 E-103 E-123 E-153 Light blue Light blue Light blue Light blue Light blue Yellow green Yellow green Yellow green Yellow green Yellow green Yellow green Yellow green Yellow green Orange Orange Orange White Pink Orange Yellow green Blue Pink Orange Yellow green Light blue Blue Purple White Yellow Pink White Light blue 10V 10V 10V 10V 10V 10V 10V 10V 10V 10V 10V 10V 10V 10V 10V 10V 0.01/H110110.06 0.05/H110110.21 0.20/H110110.42 0.40/H110110.63 0.60/H110110.92 0.88/H110111.32 1.28/H110111.72 1.68/H110112.32 2.28/H110113.10 3.00/H110114.10 3.90/H110115.10 5.00/H110116.50 6.56/H110119.84 8.00/H1101112.0 9.60/H1101114.4 12.0/H1101118.0 0.4 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.7 3.2 3.7 4.5 3.1 3.5 3.8 4.3 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 0.8lpmin. 8.00 6.00 4.00 2.00 1.00 0.65 0.40 0.25 0.15 0.10 0.07 0.04 0.32 0.17 0.08 0.03 1.1 max. 1.1max. 1.1max. 1.1max. 1.1max. 1.1max. 1.1max. 1.1max. 1.1max. 1.1max. 1.1max. 1.1max. *1.0max. *1.0max. *1.0max. *1.0max. /H110012.10/H11011/H110010.10 /H110012.10/H11011/H110010.10 /H110010.40/H11011/H110020.20 /H110010.15/H11011/H110020.25 0.00/H11011/H110020.32 /H110020.10/H11011/H110020.37 /H110020.13/H11011/H110020.40 /H110020.15/H11011/H110020.42 /H110020.18/H11011/H110020.45 /H110020.20/H11011/H110020.47 /H110020.22/H11011/H110020.50 /H110020.25/H11011/H110020.53 /H110020.25/H11011/H110020.45 /H110020.25/H11011/H110020.45 /H110020.25/H11011/H110020.45 /H110020.25/H11011/H110020.45 Part No. Part No. Part No. Indication F type Band 2 Band 3 E Type Pinch-off current*1 Limiting current*2 Dynamic*3 impedance ZT(M/H9024) Temperature*4 coefficient (%/ /H11034C) Limiting current ratio I100V/Ip*I30V/Ip Test Voltage with lead lead less Ip(mA) V K(V) IK(mA) /H11002/H11002

Power derating Pinch-off current Temperature 0.050.5 1 2 5 10 20 50 100 200 0.1 0.2 0.5 1.0 2.0 5.0 0.05 0.5 1 2 5 10 20 50 100 200 0.1 0.2 0.5 1.0 2.0 5.0 E-562 E-452 E-352 E-272 E-202 E-152 E-102 E-701 E-501 E-301 E-101 E-101L E-153 E-123 E-103 E-822 F-562 F-452 F-352 F-272 F-202 F-152 F-102 F-701 F-501 F-301 F-101 F-101L F-153 F-123 F-103 F-822 400 350 300 250 200 150 100 20 40 60 80 100 120 140 160 180 Ambient temperature Power (mW) E type 400 350 300 250 200 150 100 20 40 60 80 100 120 140 160 180 Ambient temperature temperature Pinch-off current (mA) Power (mW) F type CRD in parallel The use of CRD in parallel increases their current handling capabilities. The compensation of current reduction due to self heating Placing resistors in parallel with CRD can correct any current decrease when the applied voltage increases. The following values are typical for correction resistors. Compensative resistor is not necessary if the current value is less than 1 mA. E-102 1M /H9024 E-152 390k /H9024 E-202 240k /H9024 E-272 120k /H9024 E-352 82k /H9024 E-452 56k /H9024 E-562 39k /H9024 Increasing the voltage range using a zener diode Connecting zener diodes in series with the line ensures that the current is constant in high-voltage area. Dynamic characteristics (saturation characteristics)

0 Voltage (V)V2

Current (mA) 10 20 50 100 Voltage (V) Current (mA) CRD 1.0 0.1 0.01 /H1100230 0 30 60 90 120 150 E-153 E-272 E-202 E-152 E-102 E-701 E-501 E-301 E-101 E-123 E-103 E-822 E-562 E-452 E-352 E-452 Current (mA) Current (mA) Voltage (V) Voltage (V) (/H11034C) (/H11034C) (/H11034C)

Features

ZENAMIC is the product name of a metal oxide varistor. ZENAMIC Transient / Surge Absorber, Series D is newly released through our continued research in ceramic material composition of ZnO varistor and manufacturing process, featuring large surge current handling capability and energy handling capability for absorbing transient overvoltage in compact size. Improved in "Surge Current Handling Capability (@8/20/H9262s, 2 times)" by about 2 times over the current. Very large "Energy Handling Capability" absorbing transient overvoltages in compact sizes. Lower Clamping Voltage for better surge protection. Fast response to high speed transient/ surge voltage. Wide products range for transient/surge protection on AC 100V to AC 480V nominal system with the maximum peak current ratings of 600A to 7000A (@8/20 /H9262s, 2 times).

ZENAMIC has the forward-reverse symmetrical electrical characteristics as shown in the figure 1. The voltage-current curves show the varistor characteristics in the range 1 /H9262A to 10 4A, and show the resistance characteristics for the range under 1 /H9262A and over 10 4A in the figure 2. The voltage across terminals when test current(It: 1 mA)is applied to ZENAMIC is the standard varistor voltage(Vz), and the voltage across terminals when a standard surge(Ip) is applied represents the maximum suppression voltage(Vc). Z 10 D 221 Varistor voltage D series Element diameter ZENAMIC symbol V- characteristics A surge waveform varies according to the sources. An EXP waveform is used for surge testing of ZENAMIC, while a AC half-wave is used for the energy absorption test. The EXP waveform reaches its peak voltage (current) at [ta] as shown in the figure 5, and then decreases as time passes and reaches half of the peak voltage (current) at [tb]. This type of the EXP waveform is shown as a [ta/tb] voltage (current) waveform. For surge testing of ZENAMIC, the 8/20/H9262 sec current waveform is used. Surge waveform Power lines and surge absorption units with error display (SA series).

Applications

In the small current range, ZENAMIC features outstanding temperature characteristics. A shunt resistance Rp of metal oxide varistor has the temperature characteristics which is determined by the following equation. Temperature characteristics 1.A surge excess of the specified Maximum Peak Current may cause short circuit or mechanical damage. The following measures are recommended. In case that ZENAMIC is used in line to ground, the ground fault circuit interrupter shall be applied in location A or thermally coupled fuse shall be applied in location C. ZENAMIC shall not be used near heat generating device and free from direct sunlight. ZENAMIC shall not be used near the flammable materials. 1) Location of the over current protector(circuit breaker or current fuse)shall be in the power line to the circuit(Location A)or in series with ZENAMIC (Location B). 2) It recommended that a fuse listed in the table be put in location A or B. 3) In case that ZENAMIC is used in line to ground, the ground fault circuit interrupter should be applied in location A or thermally coupled fuse should be applied in location C. Application notes(General) Part No. 200 /H11002200 /H11002400 400 012345/H110021/H110022/H110023/H110024/H110025 Current (A) Time(/H9262s) Current (%) Voltage(V) Fig 1 Fig 5 200 500 100 2,000 1,000 /H110021010 /H11002910 /H11002810 /H11002710 /H11002610 /H11002510 /H11002410 /H11002310 /H11002210 /H11002110 010 110 210 310 410 Current (A) Voltage(V) Fig 2 Clamping voltage Varistor voltage R p R s Test current Surge current I/H11005C E /H9251 200 500 400 300 100 /H110021010 /H11002910 /H11002810 /H11002710 /H11002610 /H11002510 /H11002410 /H11002310 /H11002210 /H11002110 Current (A) Voltage(V) Fig 3 100 ta tb Rp /H11005AeEg /2kT T:Absolute temperature k:Boltzmann constant A, Eg:constants As shown in the figure 3, the temperature dependence characteristics are shown clearly in the low current area. (2) Test current 25/H11034C6 0 /H11034C9 0 /H11034C 120/H11034C Protected Equipment COM . Surge protection of signal Line Surge protection of telephone Line Telephone Protected circuit Power line A B C Protected circuit Part Number Rating of fuse 3A max. 5A max. 7A max. Part Number Rating of fuse Refer to the related Safety Standards. 10A max. 15A max. Line to line protection Line to line and line to ground protection Single line and telephone line surge protection DC AC single phase AC three phase Protected circuit f Protected circuit DC AC single phase Switching surge protection Semiconductor protection Contact spark suppression f f f f f AC three phase Protected circuit f f f f Thermal coupling Thermal coupling M Motor Z5D Z7D Z10D Z15D Z21D

Part No. Varistor Voltage V0.1mA(V) Maximum Allowable Voltage AC rms(V) DC(V) Clamping Voltage (max.) Rated Power Maximum Energy Maximum Peak Current (8/20/H9262s) Capacitance (max.) 1kHz V(V) (W) (J) (J) (A) (A) (pF) (10/1000/H9262s) (2ms) 1 time 2 times Z5D180 Z5D220 Z5D270 Z5D330 Z5D390 Z5D470 Z5D560 Z5D680 *1 Z5D820 *1 Z5D101 *1 Z5D121 *1 Z5D151 *1 Z5D201 *1 Z5D221 *1 Z5D241 *1 Z5D271 *1 Z5D331 *1 Z5D361 *1 Z5D391 *1 Z5D431 *1 Z5D471 18(16-20) 22(20-24) 27(24-30) 33(30-36) 39(35-43) 47(42-52) 56(50-62) 68(61-75) 82(74-90) 100(90-110) 120(108-132) 150(135-165) 200(185-225) 220(198-242) 240(216-264) 270(247-303) 330(297-363) 360(324-396) 390(351-429) 430(387-473) 470(423-517) 130 140 150 175 210 230 250 275 300 100 125 170 180 200 225 270 300 320 350 385 40 at 1A 104 123 150 145 at 5A 175 210 260 355 380 415 475 570 620 675 754 810 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.6 0.7 0.9 1.1 1.2 1.5 1.8 2.2 3.5 4.0 5.0 6.5 8.5 9.0 10.5 11.0 13.0 16.0 17.0 20.0 21.0 0.4 0.5 0.7 0.8 0.9 1.1 1.3 1.6 2.5 3.0 3.5 4.5 6.0 6.5 7.5 8.0 9.5 11.0 12.0 13.0 15.0 250 250 250 250 250 250 250 250 800 800 800 800 800 800 800 800 800 800 800 800 800 125 125 125 125 125 125 125 125 600 600 600 600 600 600 600 600 600 600 600 600 600 1600 1500 1450 1400 700 650 600 580 460 400 350 300 120 110 100 * 90 *2 80 *2 80 *2 80 *2 70 *2 60 *2 Z7D Series Specifications Part No. Varistor Voltage V1mA (V) Maximum Allowable Voltage AC rms (V) DC(V) Clamping Voltage (max.) Rated Power Maximum Energy Maximum Peak Current (8/20/H9262s) Capacitance (max.) 1kHz V(V) (W) (J) (J) (A) (A) (pF) (10/1000/H9262s) (2ms) 1 time 2 times Z7D180 Z7D220 Z7D270 Z7D330 Z7D390 Z7D470 Z7D560 Z7D680 18(16-20) 22(20-24) 27(24-30) 33(30-36) 39(35-43) 47(42-52) 56(50-62) 68(61-75) 36 at 2.5A 110 135 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 1.1 1.3 1.6 2.0 2.4 2.8 3.4 4.1 0.9 1.1 1.3 1.6 1.9 2.3 2.7 3.3 500 500 500 500 500 500 500 500 250 250 250 250 250 250 250 250 3800 3600 3400 2900 1600 1550 1500 1200 *1 Z7D820 *1 Z7D101 *1 Z7D121 *1 Z7D151 *1 Z7D201 *1 Z7D221 *1 Z7D241 *1 Z7D271 *1 Z7D331 *1 Z7D361 *1 Z7D391 *1 Z7D431 *1 Z7D471 *1 Z7D511 82(74-90) 100(90-110) 120(108-132) 150(135-165) 200(185-225) 220(198-242) 240(216-264) 270(247-303) 330(297-363) 360(324-396) 390(351-429) 430(387-473) 470(423-517) 510(459-561) 130 140 150 175 210 230 250 275 300 320 100 125 170 180 200 225 270 300 320 350 385 410 135 at 10A 165 200 250 340 360 395 455 545 595 650 710 775 845 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 8.5 17.5 12.5 13.5 27.5 810 700 590 500 200 190 170 150 130 130 130 120 100 * 90 *2 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 1. Operating temperature range:/H1100240 to 85/H11034C 2. Storage temperature range:/H1100240 to 125/H11034C *1 UL 1449 approved model *2 Measured at 1MHz

Part No. Varistor Voltage V1mA (V) Maximum Allowable Voltage AC rms(V) DC(V) Clamping Voltage (max.) Rated Power Maximum Energy Maximum Peak Current (8/20/H9262s) Capacitance (max.) 1kHz V(V) (W) (J) (J) (A) (A) (pF) (10/1000/H9262s) (2ms) 1 time 2 times 1. Operating temperature range:/H1100240 to 85/H11034C 2. Storage temperature range:/H1100240 to 125/H11034C * UL 1449 approved model Z10D180 Z10D220 Z10D270 Z10D330 Z10D390 Z10D470 Z10D560 Z10D680 18(16-20) 22(20-24) 27(24-30) 33(30-36) 39(35-43) 47(42-52) 56(50-62) 68(61-75) 36 at 5A 110 135 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 2.6 3.2 3.9 4.8 5.6 6.8 8.1 9.8 2.2 2.6 3.2 4.0 4.7 5.6 6.7 8.2 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 500 500 500 500 16000 11000 8000 6300 5200 4600 3750 2800 * Z10D820 * Z10D101 * Z10D121 * Z10D151 * Z10D201 * Z10D221 * Z10D241 * Z10D271 * Z10D331 * Z10D361 * Z10D391 * Z10D431 * Z10D471 * Z10D511 * Z10D561 * Z10D681 * Z10D751 * Z10D821 * Z10D911 * Z10D102 82(74-90) 100(90-110) 120(108-132) 150(135-165) 200(185-225) 220(198-242) 240(216-264) 270(247-303) 330(297-363) 360(324-396) 390(351-429) 430(387-473) 470(423-517) 510(459-561) 560(504-616) 680(612-748) 750(675-825) 820(738-902) 910(819-1001) 1000(900-1100) 130 140 150 175 210 230 250 275 300 320 350 420 460 510 550 625 100 125 170 180 200 225 270 300 320 350 385 410 450 560 615 670 745 825 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 100 110 130 140 14.5 27.5 100 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2000 1700 1400 1100 430 410 380 350 300 300 300 270 230 210 200 170 160 140 120 110 Z15D Series Specifications Part No. Varistor Voltage V1mA (V) Maximum Allowable Voltage AC rms(V) DC(V) Clamping Voltage (max.) Rated Power Maximum Energy Maximum Peak Current (8/20/H9262s) Capacitance (max.) 1kHz V(V) (W) (J) (J) (A) (A) (pF) (10/1000/H9262s) (2ms) 1 time 2 times Z15D180 Z15D220 Z15D270 Z15D330 Z15D390 Z15D470 Z15D560 Z15D680 18(16-20) 22(20-24) 27(24-30) 33(30-36) 39(35-43) 47(42-52) 56(50-62) 68(61-75) 36 at 10A 110 135 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 5.2 6.3 7.8 9.5 4.3 5.3 6.5 7.9 9.4 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 1000 1000 1000 25000 20000 16000 12200 7000 6750 6500 5500 * Z15D820 * Z15D101 * Z15D121 * Z15D151 * Z15D201 * Z15D221 * Z15D241 * Z15D271 * Z15D331 * Z15D361 * Z15D391 * Z15D431 * Z15D471 * Z15D511 * Z15D561 * Z15D681 * Z15D751 * Z15D821 * Z15D911 * Z15D102 82(74-90) 100(90-110) 120(108-132) 150(135-165) 200(185-225) 220(198-242) 240(216-264) 270(247-303) 330(297-363) 360(324-396) 390(351-429) 430(387-473) 470(423-517) 510(459-561) 560(504-616) 680(612-748) 750(675-825) 820(738-902) 910(819-1001) 1000(900-1100) 130 140 150 175 210 230 250 275 300 320 350 420 460 510 550 625 100 125 170 180 200 225 270 300 320 350 385 410 450 560 615 670 745 825 135 at 50A 165 200 250 340 360 395 455 545 595 650 710 775 845 930 1120 1240 1355 1500 1650 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 115 130 140 155 175 190 190 210 235 255 280 37.5 100 110 125 136 136 136 150 165 180 200 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 5000 5000 5000 5000 5000 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 3700 3200 2700 2200 770 740 700 640 580 540 500 450 400 350 340 320 310 280 250 230 135 165 200 250 340 360 395 455 545 595 650 710 775 845 930 1120 1240 1355 1500 1650 at 25A 190 4500

22.5 max. 9.5 max. 15.5 max. 19.0 max. 10.0 max. 11.5max. 25.5 max. 20.0 min. 20.0min. 20.0 min. 20.0 min. 20.0 min. 7.5/H110061 7.5/H1100615/H110061 5/H110061 10/H110061.0 10/H110061.0 7.5/H110061 7.5/H1100615/H110061 5/H110061 /H92780.8 /H92780.8/H92780.6 /H92780.6 /H92781.0 7.4 max. 7.4 max. P2 P /H9278D A L F PO /H9278D 0/H9278d W 0 W 1 W 2 H 0 H W t /H9004h T P2 P /H9278D A L F PO /H9278D 0/H9278d W 0 W 1 W 2 H 0 H W t /H9004h T Z5D Z21D Crimped Leads and Taped Z7D Z10D Z15D Z5D T4C Z7D T4C Straight Leads and Taped Z5D T4D Z7D T4D *Dimension’’T’’:Conforms to each individual specification *Packing quantily:1000pcs/BOX Symbol P F W h /H9278d /H9278D Z5D:7max, Z7D:8.5max /H9278D Z5D:7max, Z7D:8.5max Type 12.7/H110061.0 5.0/H110060.5 18.0 0/H110062 0.60 12.7/H110060.3 3.85/H110060.70 6.35/H110061.30 /H110010.06 /H110020.05 /H110011.0 /H110020.5 Symbol t L W 1 W 0 W 2 H 0 H Type 5.0min /H92784.0/H110060.2 17.0/H110060.5 0.6/H110060.3 9.0/H110060.5 3max 11max Approx. 22 5.0min /H92784.0/H110060.2 17.0/H110060.5 0.6/H110060.3 9.0/H110060.5 3max 11max Approx. 20 *Dimension"T":Conforms to each individual specification *Packing quantily:1000pcs/BOX P F W h /H9278d 12.7/H110061.0 5.0/H110060.5 18.0 0/H110062 0.60 12.7/H110060.3 3.85/H110060.70 6.35/H110061.30 /H110010.06 /H110020.05 /H110011.0 /H110020.5 t L /H9278D 0 /H9278D 0 W 1 W 0 W 2 H 0 H Unit(mm) Z21D Series Specifications Part No. Varistor Voltage V1mA (V) Maximum Allowable Voltage AC rms(V) DC(V) Clamping Voltage (max.) Rated Power Maximum Energy Maximum Peak Current (8/20/H9262s) Capacitance (max.) 1kHz V(V) (W) (J) (J) (A) (A) (pF) (10/1000/H9262s) (2ms) 1 time 2 times 1. Operating temperature range:/H1100240 to 85/H11034C 2. Storage temperature range:/H1100240 to 125/H11034C Z21D180 Z21D220 Z21D270 Z21D330 Z21D390 Z21D470 Z21D560 Z21D680 18(16-20) 22(20-24) 27(24-30) 33(30-36) 39(35-43) 47(42-52) 56(50-62) 68(61-75) 36 at 20A 110 135 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 3000 3000 3000 3000 3000 3000 3000 3000 2000 2000 2000 2000 2000 2000 2000 2000 40000 30000 24500 20000 13800 13500 12200 11500 * Z21D820 * Z21D101 * Z21D121 * Z21D151 * Z21D201 * Z21D221 * Z21D241 * Z21D271 * Z21D331 * Z21D361 * Z21D391 * Z21D431 * Z21D471 * Z21D511 * Z21D561 * Z21D681 * Z21D751 * Z21D821 * Z21D911 * Z21D102 82(74-90) 100(90-110) 120(108-132) 150(135-165) 200(185-225) 220(198-242) 240(216-264) 270(247-303) 330(297-363) 360(324-396) 390(351-429) 430(387-473) 470(423-517) 510(459-561) 560(504-616) 680(612-748) 750(675-825) 820(738-902) 910(819-1001) 1000(900-1100) 130 140 150 175 210 230 250 275 300 320 350 420 460 510 550 625 100 125 170 180 200 225 270 300 320 350 385 410 450 560 615 670 745 825 135 at 100A 165 200 250 340 360 395 455 545 595 650 710 775 845 930 1120 1240 1355 1500 1650 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 106 140 155 168 190 228 255 275 303 350 382 382 420 460 510 565 100 110 120 135 160 180 195 215 250 273 273 273 300 325 360 400 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 7500 7500 7500 7500 7500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 7500 6500 5500 4500 1700 1600 1500 1300 1100 1100 1100 1000 900 800 750 650 600 530 500 450 * UL 1449 approved model 382 7500 /H9004 /H9004

Z25M, Z33M type The said unit is connected to line and ground, and protects an electric appliance from the surge influence. When the unit was broken by the surge of over rated current, it shows trouble in lighting LED. The socket of exclusive use for the unit, shown in right side figure, is also suppliable. Power supply line Unit Z25M, Z33M Series SURGE ABSORBER UNIT 4.3 51/H110061 60/H110061 55/H110061 ISO Zenamic Z33M441 JAPAN SA 100V SA-100V W D /H92783 /H92783 12.5 H12.5 9.5 0/H110111.5 use as short circuit (7.5) (7.5) Unit(mm) Unit(mm) Absorption unit C A B Part No. Min Max Varistor voltage V1mA (V) Maximum allowable voltage AC DC Maximum clamping voltage Rated wattage Energy (2ms) Withstanding Surge current (8/20/H9262s) Typical capacitance (@1kHz) V W J pF1 Time 2 Times Z25M221S Z25M271S Z25M331S Z25M391S Z25M441S Z25M471S Z25M561S Z25M681S Z25M821S Z25M102S Z33M221S Z33M271S Z33M331S Z33M391S Z33M441S Z33M471S Z33M561S Z33M681S Z33M821S Z33M102S 220(187 /H11011253 ) 270(229.5/H11011310.5) 330(280.5/H11011379.5) 390(331.5/H11011448.5) 440(374 /H11011506 ) 470(399.5/H11011540.5) 560(476 /H11011644 ) 680(578 /H11011782 ) 820(697 /H11011943 ) 1000(850 /H110111,150) 220(187 /H11011253 ) 270(229.5/H11011310.5) 330(280.5/H11011379.5) 390(331.5/H11011448.5) 440(374 /H11011506 ) 470(399.5/H11011540.5) 560(476 /H11011644 ) 680(578 /H11011782 ) 820(697 /H11011943 ) 1000(850 /H110111150) 120 150 175 210 240 250 300 365 440 520 125 155 185 215 225 235 260 280 330 375 200 255 310 360 370 385 425 460 580 620 3300 2200 1900 1700 1500 1500 1400 1250 800 500 5500 4200 3700 3200 2800 2600 2200 1800 1500 1000 165 210 245 295 335 350 420 510 615 730 120 150 175 210 240 250 300 365 440 520 165 210 245 295 335 350 420 510 615 730 380 at 150A 465 570 675 760 810 970 1175 1415 1725 380 at 200A 465 570 675 760 810 970 1175 1415 1725 VV rms 1.0 1.2 15000A 25000A 10000A 20000A Specifications 48V DC 100V AC 200V AC 240V AC SA- 50V SA-100V SA-200V SA-240V 65V DC 140VAC 250VAC 300VAC 180VDC or 140VDC 240VAC 510VAC 510VAC 1250 1250 1250 1250 SA-50V, 100V SA-200V, 240V 40/H110061 40/H110061 15/H11006 18/H110061 30/H110061 35/H110061 1500 1250 1500 1500 Line voltage Part No. Part No. W D H Rating voltage line-line VV ground-line Rating current line-line AA ground-line Clamping voltage is measured by( )V peak voltage wave with line impedance of 50/H9024 Specifications table SA series (mm) 1. Operating temperature range:/H1100240 to 85/H11034C 2. Storage temperature range:/H1100240 to 125/H11034C

Characteristics CriterionTest Methods/Descriptions Standard Test Condition Varistor Voltage Maximum Allowable Voltage Maximum Energy Clamping Voltage Rated Power Maximum Peak Current (Withstanding Surge Current) Temperature Coefficient of Varistor Voltage Capacitance Withstanding Voltage (Body lnsulation) lmpulse Life Electrical 2 times 1 times Unless other wise specified, electrical measurements (initial/aftertests) shall be conducted at temperature of 5 to 35/H11034C,relative humidity of 45 to 85% and atmospheric pressure of 860 to 1060 hPa. The voltage between two terminals with the specified measuring current C mA DC applied is called Vc or VcmA . The measurement shall be made as fast as possible to avoid heat affection. The maximum sinusoidal RMS voltage or maximum DC voltage that can be applied continuously in the specified operating temperature range. The maximum voltage between two terminals with the specified standard impulse current (8/20/H9262s) illustrated below applied. Time20m s 8m s 100Current (%) The power that can be applied in the specified ambient temperature. The maximum energy within the varistor voltage change of /H1100610% when a single impulse current of 2 ms or 10/ 1000/H9262s is applied. The maximum current within the varistor voltage change of /H1100610% when a standard impulse current of 8 / 20/H9262s is applied two times with an interval of 5 minutes. The maximum current within the varistor voltage change of /H1100610% with a single standard impulse current of 8 / 20/H9262s is applied . VcmA at 25/H11034C V0.1mA . V1mA /H11021330V V0.1mA . V1mA /H11022330V VcmA at 85/H11034C /H11002VcmA at 25/H11034C1 /H11003 /H11003104 Times /H11003105 Times Capacitance shall be measured at 1kHz /H1100610%,1Vrms max.(1MHz/H1100610% below 100pF),0 V bias and 20/H110062/H11034C The specified voltage shall be applied between both terminals of the specimen connected together and metal foil closely wrapped round its body for 1 minute. Classification(Nominal varistor voltage) Test voltage(AC)

1000 Vrms

1500 Vrms

mA shall be measured after the impulse current listed below is applied 10000 or 100000 times continuously at intervals of 10 seconds at room temperature. ltem Cycles Current lmpulse Life( ) lmpulse Life( ) impulse current (A) Part NO. Z 7D820 to Z 7D511 Z 5D820 to Z 5D471 Z15D820 to Z15D102 Z10D820 to Z10D102 Z21D820 to Z21D102 Z 7D180 to Z 7D680 Z 5D180 to Z 5D680 Z15D180 to Z15D680 Z10D180 to Z10D680 Z21D180 to Z21D680 8( 8 / 20/H9262s) 25( 8 / 20/H9262s) 90( 8 / 20/H9262s) 130( 8 / 20/H9262s) 50( 8 / 20/H9262s) 40( 8 / 20/H9262s) 100( 8 / 20/H9262s) 200( 8 / 20/H9262s) 250( 8 / 20/H9262s) 150( 8 / 20/H9262s) 5( 8 / 20/H9262s) 15( 8 / 20/H9262s) 50( 8 / 20/H9262s) 65( 8 / 20/H9262s) 35( 8 / 20/H9262s) 25( 8 / 20/H9262s) 60( 8 / 20/H9262s) 110( 8 / 20/H9262s) 120( 8 / 20/H9262s) 85( 8 / 20/H9262s) To meet the specified value. 0 to/H110020.05% //H11034C max. To meet the specified value No breakdown /H9004VcmA /V cmA /H11021/H1100610% /H11002/H11002 /H11002/H11002

Characteristics Test Methods Criterion Robustness of Terminations (Tensile) Robustness of Terminations (Bending) Humidity (Steady State) Vibration Solderability Resistance to Soldering Heat High Temperature Storage/Dry Heat High Temperature Load/ Dry Heat Load Low Temperature Storage/Cold Damp Heat Load/ Humidity Load Temperature Cycle Mechanical Environmental After gradual applying of the force specified below and keeping the unit fixed for 10 seconds, the terminal shall be visually examined for any damage. Terminal diameter Force /H92780.6mm,/H92780.8mm 9.8N(1.0kgf) /H92781.0mm 19.6N(2.0kgf) The unit shall be secured with its terminal kept vertical and the force specified below shall be applied in the axial direction. The terminal shall gradually be bent by 90/H11034 in one direction, then 90/H11034 in the opposite direction, and again back to the original position. The damage of the terminal shall be visually examined. After repeated applying of a single harmonic vibration (amplitude:0.75mm, double amplitude:1.5mm) with 1 minute vibration frequency cycle (10 Hz to 55 Hz to 10Hz) to each of three perpendicular directions for 2 hours. Thereafter, the unit shall be visually examined. The specimen shall be subjected to 125/H110062/H11034C for 1000 hours in a thermostatic bath without load and then stored at room temperature and normal humidity for 1 to 2 hours. Thereafter, the change of V CmA shall be measured. After being continuously applied the Maximum Allowable Voltage at 85/H11006 2/H11034C for 1000 hours, the specimen shall be stored at room temperature and normal humidity for 1 to 2 hours. Thereafter, the change of VCmA shall be measured. The specimen shall be subjected to 40/H110062/H11034C, 90 to 95% RH for 1000 hours without load and then stored at room temperature and normal humidity for 1 to 2 hours. Thereafter, the change of V CmA shall be measured. The specimen shall be subjected to 40/H110062/H11034C, 90 to 95% RH and the Maximum Allowable Voltage for1000 hours and then stored at room temperature and normal humidity for 1 to 2 hours. Thereafter, the change of V CmA shall be measured. The specimen shall be subjected to /H1100240/H110062/H11034C without load for1000 hours and then stored at room temperature and normal humidity for 1 to 2 hours. Thereafter, the change of V CmA shall be measured. The following temperature cycle shall be repeated five times and then stored at room temperature and normal humidity for 1 to 2 hours. The change of V CmA and mechanical damage shall be examined. After each lead shall be dipped into a solder bath of 260/H110065/H11034C to a point 2.0 to 2.5mm from the body of the unit, using shielding board (t/H110051.5mm), be held there for 10/H110061s (5 series:5/H110061s) and then be stored at room temperature and normal humidity for 1 to 2 hours. The change of V CmA and mechanical damage shall be examined. After dipping the terminals to a depth of approxirnately 3 mm from the body in a soldering bath of 235/H110065/H11034C for 2/H110060.5seconds, the terminal shall be visually examined. Terminal diameter Force /H9278 0.6mm, /H92780.8mm 4.9N(0.5kgf) /H92781.0mm 9.8N(1.0kgf) Step Temperature(/H11034C) Period(minutes) 1 /H1100240/H110063 30/H110063

2 Room temperature 15/H110063

4 Room temperature 15/H110063

Approximately 95% of the terminals shall be covered uniformly with new solder /H9004V CmA /VCmA /H11021/H110065% No remarkable mechanical damage No remarkable mechanical damage /H11002/H11002 /H9004V CmA /VCmA /H11021/H110065% No remarkable mechanical damage /H11002/H11002 /H11002/H11002 /H11002/H11002 /H11002/H11002 /H9004V CmA /VCmA /H11021/H110065% /H9004V CmA /VCmA /H11021/H1100610% /H9004V CmA /VCmA /H11021/H1100610% /H9004V CmA /VCmA /H11021/H110065% /H11002/H11002 /H9004V CmA /VCmA /H11021/H110065%/H11002/H11002

Gas tube arrester(GTA)is a surge absorber featuring low capacitance and high surge absorption energy. lt consists of a sealed tube in which inert gas is injected and electrodes which are set at fixed intervals. The simple structure and the dimensional accuracy offer high reliability and stabilized characteristics. Applications Maximum Single lmpulse Dischrge Current Capacitance Operating Temperature Range DC Holdover Voltage Impulse Waveform 1. Protection for telephone set, facsimile, telex, telephone system, CATV, computer and peripheral equipment. 2. Semiconductor circuit protection in equipment that also uses high voltage such as TV, oscilloscope, and electron microscope. 3. Automatic control of luminous energy in stroboscopic tube. 4. Generator of high-voltage for gas igniter. Voltage-Current Characteristics

Electrical Characteristics

The current through the GTA is changed over the range of values of 10 /H1100218 to 102 amps which is shown as the figure below and the voltage across the GTA will also valy.The discharge characteristics are changed to various mode by the flowing current, and the final mode of the discharge characteristics is arc discharge . When the applied voltage across the GTA exceeds the breakdown voltage (sparkover voltage), the current through the GTA increases rapidly to value of several amps or greater. The rate of current rise and level to be reached are limited by the series impedance of the circuit.The voltage across the GTA at this time is very low with typical value of 20 to 30 volts. The current is the rms value of sinusoidal alternating current of 50Hz or 60Hz which can flow through the GTA in accordance with a certain test method without substantially altering its sparkover voltage. The usual test consists of specified loads applied for 1 sec at interval of 1 min alternately. ln the test of the maximum AC discharge current, the GTA is applied 9 cycles of 50Hz AC(180 ms) continuously. The life is defined as the minimum number of surges of a certain current waveform the GTA can survive without deterioration of its operating specifications. This is defined as the resistance value across the terminal of GTA at 100V DC for devices over 230VDC (140VDC for GTA type) breakdown voltage and 50VDC for devices less than 230VDC (140VDC for GTA type) ratings. The voltage is the minimum slowly rising DC voltage that will cause sparkover when applied across the terminal of the GTA.The GTA shall be placed in darkness for at least 15 min and tested in this condition using a ramp voltage waveform with 100V/s to 500V/s. The GTA shall be tested with a positive and a negative waveform. The sparkover current for DC sparkover voltage test shall be within 10 amps. The GTA to be exposed to the test shall be kept in total darkness before (for at least 15 min) and during the test. Then, with a ramp voltage with 5kV //H9262s applied to the GTA, the breakdown voltage level is recorded. ln case of testing with opposite polarity, using the same GTA, a minimum of 15 min shall elapse. This test is to determine the ability o f the GTA t o conduct a maximum single impulse Discharge current. The current impulse waveform is 8 / 20/H9262 The maximum single impulse discharge current is the crest current of the impulse. This values is defined as the maximum DC voltage across the t erminals of the GTA which is expected to clear and restore its high impedance state within 150 ms or less after the passage of a surge. The capacitance of the GTA is defined as capacitance across terminals of the GTA at 1 kHz. /H1100220/H11034C /H1101165/H11034C lmpulse breakdown voltage is the voltage at which the GTA fires when the voltage increases at rates of more than 100V//H9262s. This value may not vary even after the GTA has been stored in the dark for long period. The value of the impulse breakdown voltage increases with increasing steepness of the surge voltage as the figure below. Non self sustaining Townsent Glow Terminal voltage b c d a e f g Arc 1A10 /H1100216 /H110024 /H1101110 /H110025 A abnomalous glow 100 Tf Tt Time (/H9262s) St riking Voltage V V T /H11001 /H11002 /H11001 /H11002 D D D R R Ro Ro C C loc li 1 2 1. DC constant-voltage regulated power supply 2. lmpulse generator : DC current adjustment resistor : Line mimic resistor 136 Ohms : Line mimic capacitor 0.083/H9262F : lnsulation diode Current A

CM2P, CM3P type Glass tube /H92780.45 Dumet wire min.0.8min.0.8 A : max.7.0 B : 6.5/H110060.3 Unit (mm) V-t Characteristics A ceramic tube is sealed at both side by electrodes, and inside of it is filled up by inert gas. The ceramic type gas tube arrester has superior characteristics such as mechanical strength, surge absorption energy and stability. There are two electrodes type and three electrodes type. Ceramic tube Dimensions A 90L 145L 230L 350L 470L 6.6/H110060.2 7.1/H110060.2 600L 800L 7.6/H110060.2 /H92780.8 C.P. wire /H92780.8 C.P. wire ElectrodesCeramic tube /H92788/H110060.2 /H92788/H110060.2/H92788/H110060.2 /H92788/H110060.2 18 min. 11.7/H110060.2 Electrodes Unit (mm) Ceramic tube 11.7/H110060.2 6/H110060.5 6/H110060.5 24 min. A Ceramic tube A CM2P CM2P type CM3P type CM3P Leadless type Leadless type V-t Characteristics 21 3 4 5 6 21 20kV//H9262s 5kV/ /H9262s 1kV/ /H9262s 100V//H9262s 2kV/s 100V/s 4 5 6 100 200 300 400 500 700 1000 2000 4000 /H110027 10/H110026 10/H110025 10/H110024 10/H110023 10/H110022 10/H110021 100 10 Response time (s) 1 102 103 Breakedown voltage (V) GTA3P-400 GTA3P-350 21 3 4 5 6 21 20kV//H9262s 5kV/ /H9262s 1kV/ /H9262s 100V//H9262s 2kV/s 100V/s 4 5 6 100 200 300 400 500 700 1000 2000 4000 /H110027 10/H110026 10/H110025 10/H110024 10/H110023 10/H110022 10/H110021 100 10 Response time (s) 1 102 103 Breakedown voltage (V) CM2P-800L CM2P-600L CM2P-470L CM2P-350L CM2P-230L CM2P-145L CM2P-90L 25 min.19 max. B A CM2P-90L CM2P-145L CM2P-230L CM2P-350L CM2P-470L CM2P-600L CM2P-800L CM3P-230L CM3P-250L CM3P-350L CM3P-400L 90V /H1100620% 145V/H1100620% 230V/H1100615% 350V/H1100615% 470V/H1100615% 600V/H1100615% 800V/H1100615% 230V/H1100620% 250V/H1100620% 350V/H1100620% 400V/H1100620% 1000V max. 1000V max. 1000V max. 1500V max. 1500V max. 1800V max. 2000V max. 1000V max. 1000V max. 1200V max. 1200V max. Part No. DC Breakdown Voltage (100V/s) Impulse Breakdown Voltage (5kV//H9262s) Maximum Single Impulse Discharge Current (8/20/H9262s) Insulation Resistance (DC100V or 50V) Capacitance (1kHz) Impulse Life (10/1000/H9262s) 10000A/H110032 times 10000A/H110032 times 10000A/H110032 times 10000A/H110032 times 10000A/H110032 times 10000A/H110032 times 10000A/H110032 times 10000A/H110032 times 10000A/H110032 times 10000A/H110032 times 10000A/H110032 times 500A/H11003600 times 500A/H11003600 times 500A/H11003600 times 500A/H11003600 times 500A/H11003600 times 500A/H11003600 times 500A/H11003600 times 500A/H11003600 times 500A/H11003600 times 500A/H11003600 times 500A/H11003600 times 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. GTA3P-350 GTA3P-400 350V/H1100615% 400V/H1100615% 1600V max. 1600V max. Part No. DC Breakdown Voltage (100V/s) Impulse Breakdown Voltage (5kV//H9262s) Maximum Single Impulse Discharge Current (8/20/H9262s) Insulation Resistance (DC100V ) Capacitance (1kHz) Impulse Life (8/20/H9262s) 1500A/H110031 time 350A/H110031000 times 104M /H9024 min 1pF max. Suffix : L shows lead type and no-suffix shows leadless type 21 3 4 5 6 /H110027 /H110026 /H110025 /H110024 /H110023 /H110022 /H1100210 1 2 3 21 20kV//H9262s 5kV/ /H9262s 1kV/ /H9262s 100V//H9262s 2kV/s 100V/s 4 5 6 100 200 300 400 500 700 1000 2000 4000 10 10 10 10 10 10 10 10 Response time (s) 10 10 Breakedown voltage (V) CM3P400(L) CM3P350(L) CM3P250(L) CM3P230(L) CM2P CM3P Lead type Lead type Lead less type Lead less type

A glass tube is sealed at both side by electrodes, and inside of it is filled up by inert gas. M2P type Dimensions Specifications Specifications GTA type Unit (mm) Unit (mm) Unit (mm) Unit (mm) Electrodes are set in a sealed glass, and inert gas is filled inside. 21 3 4 5 6 21 20kV//H9262s 5kV/ /H9262s 1kV/ /H9262s 100V//H9262s 2kV/s 100V/s 4 5 6 V-t Characteristics 100 200 300 400 500 700 1000 2000 4000 /H110027 10/H110026 10/H110025 10/H110024 10/H110023 10/H110022 10/H110021 100 10 Response time (s) 1 102 103 Breakedown voltage (V) M2P-800L M2P-600L M2P-470L M2P-350L M2P-230L M2P-145L M2P-90L GTA-750D GTA-500D GTA-350D GTA-200D GTA-230D GTA-250D GTA-170D GTA-140D GTA-100D GTA-80D /H92780.8 C.P. wire /H92788.2/H110060.2 Glass tube 24 min.A 21 3 4 5 21 20kV//H9262s 5kV/ /H9262s 1kV/ /H9262s 100V/s100V//H9262s 2kV/s 4 5 6 V-t Characteristics 100 500 1000 5000 10000 10/H11002210/H11002410/H11002610/H110028 Response time (s) Breakedown voltage (V) Dimension A M2P- 90L 6.1/H110060.2 M2P- 145L 6.1/H110060.2 M2P- 230L 6.6/H110060.3 M2P- 350L 6.6/H110060.3 M2P- 470L 6.6/H110060.3 M2P- 600L 6.6/H110060.3 M2P- 800L 7.6/H110060.3 Glass tube F : Dumet wire C D B E A A B C D E F GTA-80D /H11011GTA-500D GTA-750D,800D 6.4max. /H92785.85/H110060.3 19max 25min. 3min. /H92780.45 7.0max. /H92786.5 /H110060.3 19max 25min. 3min. /H92780.45GTA-80D GTA-100D GTA-140D GTA-170D GTA-200D GTA-230D GTA-250D GTA-350D GTA-500D GTA-750D GTA-800D 80V /H1100615% 100V/H1100615% 140V/H1100615% 170V/H1100615% 200V/H1100615% 230V/H1100615% 250V/H1100615% 350V/H1100615% 500V/H1100615% 750V/H1100615% 800V/H1100615% 1200V max. 1300V max. 1300V max. 1500V max. 1700V max. 1700V max. 1700V max. 2000V max. 2100V max. 4500V max. 5000V max. Part No. DC Breakdown Voltage (100V/s) Impulse Breakdown Voltage (5kV//H9262s) Maximum Single Impulse Discharge Current (8/20/H9262s) Insulation Resistance (DC100V or 50V) Capacitance (1kHz) Impulse Life (8/20/H9262s) 1500A/H110031 time 1500A/H110031 time 1500A/H110031 time 1500A/H110031 time 1500A/H110031 time 1500A/H110031 time 1500A/H110031 time 1500A/H110031 time 1500A/H110031 time 1500A/H110031 time 1500A/H110031 time 500A/H110031000 times 500A/H110031000 times 500A/H110031000 times 500A/H110031000 times 500A/H110031000 times 500A/H110031000 times 500A/H110031000 times 500A/H110031000 times 500A/H110031000 times 500A/H110031000 times 500A/H110031000 times 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 104 M /H9024 min. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. M2P-90L M2P-145L M2P-230L M2P-350L M2P-470L M2P-600L M2P-800L 90V /H1100620% 145V/H1100620% 230V/H1100615% 350V/H1100615% 470V/H1100615% 600V/H1100615% 800V/H1100615% 1000V max. 1000V max. 1000V max. 1500V max. 1500V max. 2500V max. 2500V max. Part No. DC Breakdown Voltage (100V/s) Impulse Breakdown Voltage (5kV//H9262s) Maximum Single Impulse Discharge Current(8/20/H9262s) Insulation Resistance (DC100V or 50V) Capacitance (1kHz) Impulse Life (10/1000/H9262s) 3000A/H110032 times 3000A/H110032 times 3000A/H110032 times 3000A/H110032 times 3000A/H110032 times 3000A/H110032 times 3000A/H110032 times 500A/H11003100 times 500A/H11003100 times 500A/H11003100 times 500A/H11003100 times 500A/H11003100 times 500A/H11003100 times 500A/H11003100 times 104M /H9024 min. 104M /H9024 min. 104M /H9024 min. 104M /H9024 min. 104M /H9024 min. 104M /H9024 min. 104M /H9024 min. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. Suffix : shows lead type and no-suffix shows leadless type Lead type Lead less type

400V % 500V % 2400V % 3000V % 3600V % 1000V max. 1400V max. 4000V max. 4500V max. 5000V max. AC125V (Line-Line) AC250V (Line-Line) AC125V (Line-GND) AC250V (Line-GND) AC250V (Line-GND) AC1200V 3s AC1500V 1min AC1800V 3s Part No. DC Breakdown Voltage (100V/s) Impulse Breakdown Voltage (5kV//H9262s) Maximum Single Impulse Discharge Current(8/20/H9262s) Insulation Resistance (DC100V) Capacitance (1kHz) Connection Dielectric Withstanding Voltage Impulse Life (8/20/H9262s) SA01 type The SA01 is a new product which can be utilized for protecting transient voltage in power supply of equipment with earth terminal. For the equipment in which SA01 is used, the AC withstanding voltage between power lines and earth terminal can be tested without taking off "SA01". 1250A/H110032 times 1250A/H110032 times 1250A/H110032 times 1250A/H110032 times 1250A/H110032 times 100A/H11003300 times 100A/H11003300 times 100A/H11003300 times 100A/H11003300 times 100A/H11003300 times 102M /H9024 min 102M /H9024 min 102M /H9024 min 102M /H9024 min 102M /H9024 min 2pF max. 2pF max. 2pF max. 2pF max. 2pF max. Safety Standards Application Circuit Dimensions Standards Name Standards No. File No. Mark UL UL1449 E128417 CSA C22.2 No.1 LR-76099 TUV IEC61051 J500/5463 /H92780.6 Tinned copper leads /H92780.6 Solderplated nickel leads /H110061 10/H110061 18/H110061 SA01-401 16/H110061 15/H11006113min. Unit (mm) EQUIPMENT SA01 2 SA01 CIRCUIT AC100V or AC200V GND AC100V : SA01-401 SA01-242 AC200V : SA01-501 SA01-302 or SA01-362 /H1100130 /H1100220 /H1100130 /H1100220 /H1100130 /H1100220 /H1100130 /H1100220 /H1100130 /H1100220

USA:SEMITEC USA CORP. TEL:1-631-587-4086 FAX:1-631-321-9604 E-mail : sales@semitec-usa.com HONG KONG:SEMITEC(H.K.)CO.,LTD. TEL:852-2369-6773 FAX:852-2739-2396 E-mail : semihk@netvigator.com TAIWAN:SEMITEC TAIWAN CORP. TEL:886-2-2509-9855 FAX:886-2-2509-9599 E-mail : semitec@ms24.hinet.net UK:ATC SEMITEC LTD. TEL:44-1565-750538 FAX:44-1565-652396 E-mail : sales@atcsemitec.co.uk KOREA:SEMITEC KOREA CO.,LTD. TEL:82-2-3281-1155 FAX:82-2-3281-3338 E-mail : semitec@kornet.net CHINA:SEMITEC SHANGHAI OFFICE TEL:86-21-53086000 FAX:86-21-33040188 E-mail : xsgsxh@public.tz.js.cn The manufacturer hereby warrants, that it will replace this product or any part thereof which shall prove to be defective in workman- ship or material, subject to the following limitations: This is only for the benefit of the original purchaser and to no other person, company or individual. This warranty does not apply to defects caused by improper installation. This warranty is limited to the replacement of the defective product, or part thereof, and does not include any labor costs for installation or removal of the product. The manufacturer shall not be liable for indirect, consequential or special damages and is limited solely to replacement of the product. lf the product or any part thereof shall prove to be defective in workmanship or material, the original purchaser shall ship the product to the manufacturer in the original packing carton, together with a copy of the original sales receipt for the product, and, if in the opinion of the manufacturer, the product proves to be defective in workmanship or material, the sole obligation of the manufacturer shall be the replacement of the defective product or part thereof. Shipping charges to the manufacturer is the obligation of the original purchaser. This limited warranty is in lieu of and replaces all of the warranties previously given by the manufacturer, both express and implied, in- cluding any warranties of merchantability or fitness for a particular purpose. There are no warranties which extend beyond the face hereof. No lawsuit may be commenced against the manufacturer unless the original consumer purchaser has complied with all of the terms and conditions of this warranty and the manufacturer has refused to comply therewith. (02.9.3K) Subject to change without notice. HEAD OFFICE:7-7, Kinshi 1-Chome, Sumida-ku, Tokyo, 130-8512 Japan Visit us on the Web at http://www.semitec.co.jp/ TEL:81-3-3621-2704 FAX:81-3-3623-6815 E-mail : overseas@mail.semitec.co.jp (1) (2) (3) (4) ISO9002 ISO14001 Certified SEMITEC GROUP