WL11G-2B2531P04 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
A B C D E F H I J K L M N O P Q R S T WL11G-2B2531P04 | W11G-2 PRODUCT PORTFOLIO Illustration may differ
Ordering information
Type Part no. WL11G-2B2531P04 1047437 Other models and accessories www.sick.com/W11G-2 Detailed technical data
Features
Sensor/ detection principle Photoelectric retro-reflective sensor, autocollimation Dimensions (W x H x D) 15.6 mm x 48.5 mm x 42 mm Housing design (light emission) Rectangular Sensing range max. 0 m ... 4 m 1) Sensing range 0 m ... 4 m 1) Type of light Visible red light Light source LED 2) Light spot size (distance) Ø 25 mm (1.5 m) Angle of dispersion Approx. 1.5° Wave length 640 nm Adjustment Potentiometer, 11 turns 1) Reflector PL80A. 2) Average service life: 100,000 h at TU = +25 °C. Communication interface Communication interface - 2 | SICK Online data sheet | 2017-11-08 18:00:44 Subject to change without notice
WL11G-2B2531P04 | W11G-2 PRODUCT PORTFOLIO Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 5 Vpp 2) Power consumption ≤ 30 mA 3) Output type PNP 4) NPN 5) Switching mode Light/dark switching 4) 5) Switching mode selector Selectable via L/D control cable Signal voltage PNP HIGH/LOW Uv - 3 V / approx. 0 V Signal voltage NPN HIGH/LOW Approx. Uv / < 3 V Output current Imax. 100 mA Response time ≤ 330 µs 6) Switching frequency 1,500 Hz 7) Attenuation along light beam > 8 % Connection type Male connector M12, 5-pin Circuit protection A 8) C 9) D 10) Protection class II Weight 120 g Polarisation filter ✔ Special device ✔ Housing material Plastic, ABS Optics material Plastic, PMMA Enclosure rating IP66 IP67 IP69K Items supplied Reflector P250F Special feature Detecting transparent objects Ambient operating temperature –30 °C ... +60 °C Ambient storage temperature –40 °C ... +75 °C UL File No. NRKH.E181493 & NRKH7.E181493 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) 0 V or not connected, light switching. 5) Uv, dark switching. 6) Signal transit time with resistive load. 7) With light/dark ratio 1:1. 8) A = VS connections reverse-polarity protected. 9) C = interference suppression. 10) D = outputs overcurrent and short-circuit protected. Classifications ECl@ss 5.0 27270902 2017-11-08 18:00:44 | Online data sheet Subject to change without notice | SICK 3
A B C D E F H I J K L M N O P Q R S T WL11G-2B2531P04 | W11G-2 PRODUCT PORTFOLIO ECl@ss 5.1.4 27270902 ECl@ss 6.0 27270902 ECl@ss 6.2 27270902 ECl@ss 7.0 27270902 ECl@ss 8.0 27270902 ECl@ss 8.1 27270902 ECl@ss 9.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 UNSPSC 16.0901 39121528 Adjustments possible ② LED indicator green: Supply voltage active ③ LED indicator yellow: Status of received light beam ⑤ Sensitivity control Connection diagram Cd-145 + (L+) QNPN - (M) BN WH BU QPNP BK 4 L/DGY 5 4 | SICK Online data sheet | 2017-11-08 18:00:44 Subject to change without notice
WL11G-2B2531P04 | W11G-2 PRODUCT PORTFOLIO Characteristic curve WL11G-2 Sensing range Distance in m (feet) m (feet) 0.5 (1.64) (3.28) 1.5 (4.92) (6.56) 2.5 (8.20) (9.84) 3.5 (11.48) (13.12) 4 567 ① Reflector PL80A ② Reflector C110A ③ Reflector P250F ④ Reflector PL50A ⑤ Reflector PL40A ⑥ Reflector PL30A ⑦ Reflector PL20A ⑧ Reflective tape Diamond Grade Sensing range diagram WL11G-2 0 0.5 (1.64) (3.28) 1.5 (4.92) (6.56) 2.5 (8.20) (9.84) 3.5 (11.48) (13.12) 3.5 3.5 3.5 1.8 0.8 Distance in m (feet) Sensing range ① Reflector PL80A ② Reflector C110A ③ Reflector P250F ④ Reflector PL50A ⑤ Reflector PL40A ⑥ Reflector PL30A ⑦ Reflector PL20A ⑧ Reflective tape Diamond Grade 2017-11-08 18:00:44 | Online data sheet Subject to change without notice | SICK 5
A B C D E F H I J K L M N O P Q R S T WL11G-2B2531P04 | W11G-2 PRODUCT PORTFOLIO Dimensional drawing (Dimensions in mm (inch)) 19.4 (0.76) 15.6 (0.61) 7.3 (.29) 23.1 (0.91) 6.1 (0.24) 48.5 (1.91) 5.1 (0.2) 42 (1.65) ø 4.2 (0.91) 32 (1.26) 3.2 (.13) 12,9 (0.51) 39,9 (1.57) 3,5 (0.14) ① Center of optical axis ② LED indicator green: Supply voltage active ③ LED indicator yellow: Status of received light beam ④ Mounting hole ø 4.2 mm ⑤ Sensitivity control: potentiometer ⑥ Male connector M12, cable with male connector M12 or cable Recommended accessories Other models and accessories www.sick.com/W11G-2 Brief description Type Part no. Universal bar clamp systems Plate N02 for universal clamp bracket, Zinc plated steel (sheet), Zinc die cast (clamping bracket), Universal clamp (5322626), mounting hardware BEF-KHS-N02 2051608 Plate N03 for universal clamp bracket, zinc coated, Zinc plated steel (sheet), Zinc die cast (clamping bracket), Universal clamp (5322626), mounting hardware BEF-KHS-N03 2051609 Plate N04 for universal clamp, steel, Zinc plated steel (sheet), Zinc die cast (clamping bracket), Universal clamp (5322626), mounting hardware BEF-KHS-N04 2051610 Device protection (mechanical) Protective housing for universal clamp, Zinc plated steel (protective housing), Zinc die cast (clamping bracket), Universal clamp, mounting hardware BEF-SG-W12-3 2045175 1) Customizable length by sheet. Width max. 74.9 cm, length max. 91.4 cm. 6 | SICK Online data sheet | 2017-11-08 18:00:44 Subject to change without notice
WL11G-2B2531P04 | W11G-2 PRODUCT PORTFOLIO Brief description Type Part no. Mounting brackets and plates Mounting bracket, large, Stainless steel, mounting hardware included BEF-WG-W12 2013942 Mounting bracket, small, Stainless steel, mounting hardware included BEF-WK-W12 2012938 Terminal and alignment brackets Double clamp bracket for dovetail mounting, Aluminum (anodised), mounting hardware included BEF-DKH-W12 2013947 Clamping block for dovetail mounting, Aluminum (anodised), mounting hardware includ- ed BEF-KH-W12 2013285 Plug connectors and cables Head A: female connector, M12, 5-pin, straight Head B: cable Cable: PVC, unshielded, 2 m DOL-1205-G02M 6008899 Head A: female connector, M12, 5-pin, angled Head B: cable Cable: PVC, unshielded, 2 m DOL-1205-W02M 6008900 Head A: female connector, M12, 5-pin, straight Cable: unshielded DOS-1205-G 6009719 Head A: female connector, M12, 5-pin, angled Head B: - Cable: unshielded DOS-1205-W 6009720 Head A: male connector, M12, 5-pin, straight Cable: unshielded For field bus technology STE-1205-G 6022083 Head A: male connector, M12, 5-pin, angled Head B: - Cable: unshielded For field bus technology STE-1205-W 6022082 Reflectors Rectangular, screw connection, 80 mm x 80 mm, PMMA/ABS, Screw-on, 2 hole mount- ing PL80A 1003865 Fine triple reflector, screw connection, suitable for laser sensors, 47 mm x 47 mm, PM- MA/ABS, Screw-on, 2 hole mounting P250F 5308843 Fine triple reflector, screw connection, suitable for laser sensors, 18 mm x 18 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL10F 5311210 1) Customizable length by sheet. Width max. 74.9 cm, length max. 91.4 cm. 2017-11-08 18:00:44 | Online data sheet Subject to change without notice | SICK 7
A B C D E F H I J K L M N O P Q R S T WL11G-2B2531P04 | W11G-2 PRODUCT PORTFOLIO Brief description Type Part no. Fine triple reflector, screw connection, suitable for laser sensors, 38 mm x 16 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL20F 5308844 Fine triple reflector, screw connection, suitable for laser sensors, 56 mm x 28 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL30F 5326523 Fine triple reflector, screw connection, suitable for laser sensors, 76 mm x 45 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL81-1F 5325060 Suitable for laser sensors, self-adhesive, cut, see alignment note, 56.3 mm x 56.3 mm, self-adhesive REF-AC1000-56 4063030 "Diamond grade" reflective tape, self-adhesive, ready to assemble from the sheet, 74.9 cm x 91.4 cm 1), self-adhesive REF-DG-K 4019634 Chemically resistant, screw connection, 47 mm x 47 mm, Plastic, Screw-on, 2 hole mounting P250 CHEM 5321097 Fine triple reflector, chemically resistant, screw connection, 18 mm x 18 mm, Plastic, Screw-on, 2 hole mounting PL10F CHEM 5321636 Chemically resistant, screw connection, suitable for laser sensors, 16 mm x 38 mm, Plastic, Screw-on, 2 hole mounting PL20F-CHEM 5326089 Stainless steel reflector, hygienic design, chemically resistant, enclosure rating IP69K, D12 adapter shaft, 25 mm x 25 mm, Stainless steel V4A (1.4404, 316L), D12-adapter shaft PLH25-D12 2063404 Stainless steel reflector, hygienic design, chemically resistant, Enclosure rating IP 69K, M12-adapter thread, 25 mm x 25 mm, Stainless steel V4A (1.4404, 316L), M12- adapter thread PLH25-M12 2063403 Stainless steel reflector, washdown design, chemically resistant, IP 69K enclosure rat- ing, screw connection, 14 mm x 14 mm, Stainless steel V4A (1.4404, 316L), Screw-on, 2 hole mounting PLV14-A 2063405 1) Customizable length by sheet. Width max. 74.9 cm, length max. 91.4 cm. 8 | SICK Online data sheet | 2017-11-08 18:00:44 Subject to change without notice
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com