SPL-F120PPS2W04 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
SWITCHING AUTOMATION LIGHT GRIDS
A B C D E F H I J K L M N O P Q R S T SPL-F120PPS2W04 | SLG SWITCHING AUTOMATION LIGHT GRIDS
2 AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-03-09 17:40:10
Subject to change without notice
Ordering information
Type Part no. SPL-F120PPS2W04 1047344 Other models and accessories www.sick.de/SLG Detailed technical data
Features
Technology Sender/receiver Minimum detectable object (MDO) Parallel beam, 45 mm Beam separation 40 mm Optical light exit Flat Number of beams ≥ 4 Detection height 120 mm Configuration Without teach button with configuration software Cross beam/parallel beam Parallel beam active Output 1 Output 1 active, if light beam interrupted Automatic teach Automatic teach active Alignment aid Without alignment aid Muting function Muting function deactivated Performance Maximum range 3 m 1) Minimum range Parallel beam: ≥ 0 mm 2) Working range 1.5 m Response time Parallel beam ≥ 19 ms 1) No reserve for environmental issue and deterioration of the diode. 2) Aperture ± 10°. Interfaces Switching output 1 x PNP Inputs Job LED Connection type Short cable with connector M8, 4-pin
SPL-F120PPS2W04 | SLG SWITCHING AUTOMATION LIGHT GRIDS 2016-03-09 17:40:10 | Online data sheet Subject to change without notice AUTOMATION LIGHT GRIDS | SICK 3 Mechanics/electronics Wave length Infrared light, 950 nm Supply voltage Vs DC24 V, ± 20 % 1) Power consumption sender ≥ 50 mA 2) Power consumption receiver ≥ 50 mA 2) 2) Ripple < 5 Vpp Output current Imax. ≤ 100 mA Output load capacitive 100 nF Output load inductive 1 H Initialization time 1 s Dimensions (W x H x D) 25 mm x 192.4 mm x 8 mm Housing material PMMA Indication LED Synchronization Optical Enclosure rating IP 65 Circuit protection UV connections, reverse polarity protected, Output Q short-circuit protected, Interference pulse suppression Weight ≥ 20 g Switching frequency 500 kHz Aluminum stabilizer With stabilizer 1) Limit values. 2) Without load. Ambient data Protection class III EMC EN 60947-5-2 Ambient temperature Operation: –25 °C ... +55 °C Storage: –25 °C ... +70 °C Ambient light immunity Direct: 100,000 lx 1) Indirect: 150,000 lx Vibration resistance 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) Shock load 10 g / DIN EN 60068-2-29 / 16 ms 1) Sunlight.
A B C D E F H I J K L M N O P Q R S T SPL-F120PPS2W04 | SLG SWITCHING AUTOMATION LIGHT GRIDS
4 AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-03-09 17:40:10
Subject to change without notice Dimensional drawing (Dimensions in mm (inch)) Sxx-Fxxxxxxx2xxx 99 (3.90) Flat, with stabilizer Receiver Sender (0.39) 36.5 (1.44) 6.4 (0.25) Ø 9 (0.35) DH = (n x RM) – RM 5 RM 7m x 320 (12.60) (160 (6.30) at DH = 120 (4.72) ) Ø 3.8 (0.15) 12.4 (0.49) 1.4 (0.06) x 45° Receiver ① First beam ② Last beam ③ Beam separation (RM) ④ Number of beams (n) ⑤ Detection height (DH) ⑥ Connection ⑦ Same distance ⑧ Number of mounting holes (m)
SPL-F120PPS2W04 | SLG SWITCHING AUTOMATION LIGHT GRIDS 2016-03-09 17:40:10 | Online data sheet Subject to change without notice AUTOMATION LIGHT GRIDS | SICK 5 Adjustments SPL, receiver, LED indication ON Func /c49 /c50 /c51 constantly shining out ① Supply voltage ② Active if teach process active ③ No object in the light path Connection type and diagram SPL Sender Receiver Job LED M NC Job LED M
A B C D E F H I J K L M N O P Q R S T SPL-F120PPS2W04 | SLG SWITCHING AUTOMATION LIGHT GRIDS
6 AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-03-09 17:40:10
Subject to change without notice Concept of operation SPL The “green” Job LEDs indicate the correct picking bin to the operator and confirm optically that the correct picking has taken place. The “red” Job LEDs light in case of picking errors. The function LED “Func” will also turn “red” to indicate a picking error. 2. Incorrect picking Func Func Sender Receiver Sender Receiver 1. Object picking from the indicated bin Easy installation Plug & play 1. Plug in and tighten the ring of the connector 2. Device is ready for use l
SPL-F120PPS2W04 | SLG SWITCHING AUTOMATION LIGHT GRIDS 2016-03-09 17:40:10 | Online data sheet Subject to change without notice AUTOMATION LIGHT GRIDS | SICK 7 Funktionsprinzip Slim & Flat 1 2 ① Slim model = light emission on narrow side ② Flat model = light emission on broad side Recommended accessories Other models and accessories www.sick.de/SLG Brief description Type Part no. Mounting brackets and mounting plates Mounting bracket for light grids up to a monitoring height of 600 mm, mounting on the face sides, 2x BEF-SLG1, 2x BEF-SLG2 BEF-SLG-SET1 2055427 Plug connectors and cables Head A: female connector, M8, 4-pin, straight Head B: cable Cable: PVC, unshielded, 2 m DOL-0804-G02M 6009870
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com