LUT8U-11101 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
A B C D E F H I J K L M N O P Q R S T LUT8U-11101 | LUT8 LUMINESCENCE SENSORS
Ordering information
Type Part no. LUT8U-11101 1046711 Other models and accessories www.sick.com/LUT8 Detailed technical data
Features
Dimensions (W x H x D) 30.4 mm x 53 mm x 80 mm Sensing distance 10 mm 1) Housing design (light emission) Rectangular Working range 0 mm ... 20 mm Light source LED, Ultraviolet light 2) Wave length 375 nm Light emission Long side Light spot size 2 mm x 6 mm Light spot direction Vertical Receiving filters KV 418 (standard) Receiving range 450 nm ... 750 nm Adjustment Manual (rotary switch) Output function Light switching 1) From front edge of lens. 2) Average service life: 100,000 h at TU = +25 °C. Mechanics/electronics Supply voltage 12 V DC ... 30 V DC 1) Ripple < 5 Vpp 2) Power consumption < 100 mA 3) Switching frequency 2.5 kHz 4) 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) Reference voltage DC 50 V.
2 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
LUT8U-11101 | LUT8 LUMINESCENCE SENSORS Response time 200 µs 5) Switching output PNP, NPN Switching output (voltage) PNP: HIGH = VS– ≤ 3 V / LOW = approx. 0 V NPN: HIGH = approx. VS / LOW ≤ 2 V Switching output Light switching Analog output 0 mA ... 13 mA Output current Imax. 100 mA Connection type Male connector M12, 5-pin Protection class II 6) Circuit protection UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression Enclosure rating IP67 Weight 400 g Housing material Zinc diecast 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) Reference voltage DC 50 V. Ambient data Ambient operating temperature –10 °C ... +55 °C Ambient storage temperature –25 °C ... +75 °C Shock load According to IEC 60068 Classifications ECl@ss 5.0 27270908 ECl@ss 5.1.4 27270908 ECl@ss 6.0 27270908 ECl@ss 6.2 27270908 ECl@ss 7.0 27270908 ECl@ss 8.0 27270908 ECl@ss 8.1 27270908 ECl@ss 9.0 27270908 ETIM 5.0 EC001822 ETIM 6.0 EC001822 UNSPSC 16.0901 39121528 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T LUT8U-11101 | LUT8 LUMINESCENCE SENSORS Dimensional drawing (Dimensions in mm (inch)) (.67) 80 (3.15) 52 (2.05) 28 (1.10)13 (.51) 40 (1.57) 53 (2.09) 30.4 (1.20) 21 (.83) 3 (.19) 28 (1.10) 56 (2.20) 9 (.35) Sensing distance 10 mm Sensing distance 90 mm Sensing distance 20/50 mm 3 (0.12) 26 (1.02) (1.02) 4.1 (0.16) Ø 33.2 (1.31) Ø 32 (1.26) 40.7 (1.60) ① M5 threaded mounting hole, 5.5 mm deep ② Light spot direction ③ Center of optical axis ④ Connector M12 (rotatable up to 90°) ⑤ See dimensional drawings of lenses Adjustments – + Sensitivity low high ① Rotary selection switch ② Function signal indicator (yellow), switching output ③ Bar graph (green), power-on left-hand LED
4 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
LUT8U-11101 | LUT8 LUMINESCENCE SENSORS Connection diagram cd-312 +(L+) QNPN -(M) QPNP BN WH BU BK QA GY 5 Concept of operation Rotary switch 1. Position mark 2. Position background Sensitivity s etting t Signal strength Mark signal Switching threshold Background signal Q – + Sensitivity low high Q – + Sensitivity low high Turn “Sensitivity” rotary switch clockwise until yellow LED illuminates. If yellow LED illuminates, turn “Sensitivity” rotary switch counter-clockwise until the yellow LED just goes out. Note The bar graph display shows the luminescence intensity (regardless of switching threshold setting). Adjustments are intendend for luminescence background suppression. Characteristic curve Sensing distance (1.57) 0 80 (3.15) 120 (4.72) 160 (6.30) 200 (7.87) 240 (9.45) Relative sensitivity in % Switching threshold Scan material: SICK Luminescence reference 100 % Sensing distance in mm (inch) 300 250 200 150 100 ① Sensing distance 10 mm ② Sensing distance 20 mm ③ Sensing distance 50 mm ④ Sensing distance 90 mm 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T LUT8U-11101 | LUT8 LUMINESCENCE SENSORS Light spot size Sensor 110 (4.3) (3.5) (2.8) 6 x 15 (0.2 x 0.6) 12 x 12 (0.5 x 0.5) 13 x 16 (0.5 x 0.6) Sensor (2.4) (2.0) (1.6) 6 x 16 (0.2 x 0.6) 5 x 15 (0.2 x 0.6) 8 x 20 (0.3 x 0.8) Sensor (1.2) (0.8) (0.4) 3 x 10 (0.1 x 0.4) 3 x 9 (0.1 x 0.4) 8 x 14 (0.3 x 0.6) Sensor (0.6) (0.4) (0.2) 5 x 10 (0.2 x 0.4) 2 x 6 (0.1 x 0.2) 4 x 8 (0.2 x 0.3) Distance Distance Distance Distance All dimensions in mm (inch) Sensing distance 10 mm Sensing distance 20 mm Sensing distance 50 mm Sensing distance 90 mm Recommended accessories Other models and accessories www.sick.com/LUT8 Brief description Type Part no. Universal bar clamp systems Plate G for universal clamp bracket, steel, zinc coated, Universal clamp (2022726), mounting hardware BEF-KHS-G01 2022464 Plate K for universal clamp bracket, steel, zinc coated, Universal clamp (2022726), mounting hardware BEF-KHS-K01 2022718 Universal clamp bracket for rod mounting, steel, zinc coated, without mounting hard- ware BEF-KHS-KH1 2022726 Mounting bar, straight, 200 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-A 4056054 Mounting bar, straight, 300 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-B 4056055 Mounting bar, L-shaped, 150 mm x 150 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-A 4056052 Mounting bar, L-shaped, 250 x 250 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-B 4056053 Plug connectors and cables Head A: female connector, M12, 5-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 2 m YF2A15-020VB5XLEAX 2096239 Head A: female connector, M12, 5-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 5 m YF2A15-050VB5XLEAX 2096240 Head A: female connector, M12, 5-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 10 m YF2A15-100VB5XLEAX 2096241
6 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24
Subject to change without notice
LUT8U-11101 | LUT8 LUMINESCENCE SENSORS Brief description Type Part no. Head A: female connector, M12, 5-pin, angled, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 2 m YG2A15-020VB5XLEAX 2096215 Head A: female connector, M12, 5-pin, angled, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 5 m YG2A15-050VB5XLEAX 2096216 Head A: female connector, M12, 5-pin, angled, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 10 m YG2A15-100VB5XLEAX 2096217 Head A: female connector, M12, 5-pin, straight Cable: unshielded DOS-1205-G 6009719 Head A: female connector, M12, 5-pin, angled Head B: - Cable: unshielded DOS-1205-W 6009720 Lenses and accessories Lens, 10 mm sensing distance, M25 x 0.75 OBJ-LUT3-10 2016348 Lens, 20 mm sensing distance, M25 x 0.75 OBJ-LUT3-20 2016349 Lens, 50 mm sensing distance, M25 x 0.75 OBJ-LUT3-50 2016350 Reference materials Crayon, red fluorescence LUM-FT 1004460 Writing chalk, red fluorescence LUM-KLK 1002959 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 7
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com