ELG6-1200P561 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
SWITCHING AUTOMATION LIGHT GRIDS
A B C D E F H I J K L M N O P Q R S T ELG6-1200P561 | ELG SWITCHING AUTOMATION LIGHT GRIDS
2 AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-03-09 17:40:10
Subject to change without notice
Ordering information
Type Part no. ELG6-1200P561 1044292 Other models and accessories www.sick.de/ELG Detailed technical data
Features
Technology Sender/receiver Minimum detectable object (MDO) Parallel beam: ≥ 35 mm ... 65 mm Beam separation 60 mm Number of beams ≥ 21 Detection height 1,200 mm Evaluation beams Parallel beam Performance Maximum range 17 m Minimum range ≥ 0 mm Working range 12 m Response time Parallel beam ≥ 100 ms 1) 1) With resistive load. Interfaces Switching output 2 x PNP (Q and /Q) Connection type M12, 4-pin male connector Mechanics/electronics Wave length 880 nm Supply voltage Vs DC 15 V ... 30 V 1) Power consumption sender < 100 mA 1) Power consumption receiver < 100 mA 1) Ripple < 5 Vpp Output current Imax. ≤ 100 mA Output load capacitive 100 nF 1) Typical value. 2) Q = active, if at least one beam is interrupted, /Q = active, if all of the beams are free.
ELG6-1200P561 | ELG SWITCHING AUTOMATION LIGHT GRIDS 2016-03-09 17:40:10 | Online data sheet Subject to change without notice AUTOMATION LIGHT GRIDS | SICK 3 Output load inductive 1 H Initialization time 1 s Dimensions (W x H x D) 34 mm x 1,276 mm x 29 mm Housing material Aluminum Indication LED Synchronization Optical Enclosure rating IP 65 Circuit protection UV connections, reverse polarity protected, Output Q short-circuit protected, Interference pulse suppression Weight ≥ 3,300 g Switching frequency 313 kHz Front screen PMMA Output mode Q dark switching 2) 1) Typical value. 2) Q = active, if at least one beam is interrupted, /Q = active, if all of the beams are free. Ambient data Protection class III EMC EN 60947-5-2 Ambient temperature Operation: –25 °C ... +55 °C Storage: –40 °C ... +70 °C Ambient light immunity Indirect: ≤ 150,000 lx 1) Vibration resistance 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) Shock load 10 g / DIN EN 60068-2-29 / 16 ms 1) Sunlight.
A B C D E F H I J K L M N O P Q R S T ELG6-1200P561 | ELG SWITCHING AUTOMATION LIGHT GRIDS
4 AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-03-09 17:40:10
Subject to change without notice Dimensional drawing (Dimensions in mm (inch)) ELG3/ELG6 (1.14) (0.35) (1.34) /c49 /c50 /c51 /c52 /c54 33.5 (1.32) (0.83) 9 (0.35) 11 (0.43) /c53 ① Detection height ② Beam separation ELG3: 30 mm/ELG6: 60 mm ③ Status indicator (ELGE)/Power on (ELGS) ④ Sensitivity control ⑤ Distance to first beam; ELG3: 42.5 mm/ELG6: 72.5 mm ⑥ Connection
ELG6-1200P561 | ELG SWITCHING AUTOMATION LIGHT GRIDS 2016-03-09 17:40:10 | Online data sheet Subject to change without notice AUTOMATION LIGHT GRIDS | SICK 5 Adjustments LED display receiver /c50 /c49 ① No object in the light path (alignment OK) ② Contamination control Connection type and diagram ELG3/ELG6 Sender Connector M12, 4-pin Receiver Connector M12, 4-pin nc M TEST brn wht blu blk ¯ Q M Q brn wht blu blk Sender Receiver ① Not assigned
A B C D E F H I J K L M N O P Q R S T ELG6-1200P561 | ELG SWITCHING AUTOMATION LIGHT GRIDS
6 AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-03-09 17:40:10
Subject to change without notice Concept of operation Remove cap with screw driver. 1. Remove cap 2. Potentiometer adjustment Sensitivity adjustment t Signal strength Switching threshold Turn left = for a lower range. Turn right = for a higher range. The light grid communicates via the light beams. A cable is not necessary for the optical synchronisation. Optical synchronisation Sensitivity adjustment Recommended accessories Other models and accessories www.sick.de/ELG Brief description Type Part no. Terminal and alignment brackets 4 pieces, Mounting kit 1, rotatable, swivel mount, plastic BEF-2SMKEAKU4 2019649 Plug connectors and cables Head A: female connector, M12, 4-pin, straight Head B: cable Cable: PVC, unshielded, 5 m DOL-1204-G05M 6009866
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com