DML40-2-1111S01 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
LONG RANGE DISTANCE SENSORS
A B C D E F H I J K L M N O P Q R S T DML40-2-1111S01 | DML LONG RANGE DISTANCE SENSORS
2 DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11
Subject to change without notice
Ordering information
Type Part no. DML40-2-1111S01 1044053 Other models and accessories www.sick.com/DML Detailed technical data Performance Measuring range 0.5 m ... 600 m, on reflective tape "Diamond Grade" 1) 0.5 m ... 800 m, on reflector PL880FS01 2) 0.5 m ... 1,200 m, on reflector OP60 3) Resolution ≤ 1 mm Repeatability 6 mm 4) 5) Accuracy ± 10 mm 6) 7) Response time 1 ms ... 600 ms 8) Cycle time 5,120 per sec. Average depth 1/16/64/256/1,024 Output time 1 ms ... 600 ms 8) Light source Laser, infrared Laser class 2 (für DML40-2-1111S01) Typ. light spot size (distance) 20 mm (+ 5 x distance in m) Note Alignment laser always on Special characteristic Alignment laser always on 1) On reflective tape "Diamond Grade" 2) On reflector PL880FS01. 3) On reflector OP60. 4) 6 % ... 90 % remission. 5) Environmental conditions constant, min. warm-up time 30 min, average depth 1,024, statistical error 1 σ. 6) 23 °C air temperature, 977 hPa, min. warm-up time 30 min. 8) Dependent on averaging method, averaging depth, timeout, baud rate, data output, and output format. Interfaces Analog output 4 mA ... 20 mA, scalable 1) Switching output Q1, Q2 1) Data interface RS-422, RS-232 2) Interface for parametrization RS-232 1) Output Q short-circuit protected. 2) Switchable.
DML40-2-1111S01 | DML LONG RANGE DISTANCE SENSORS 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 3 Mechanics/electronics Supply voltage Vs DC 18 V ... 30 V, limit values Ripple 5 Vpp 1) Power consumption ≤ 6 W 2) Initialization time 6 s Connection type 1 x terminal connection, 1 x Sub D, 9-pin Weight Approx. 1,200 g Output current IA 100 mA 1) May not fall short of or exceed VS tolerances. 2) Without load. Ambient data Enclosure rating IP 65 Protection class III 1) Electromagnetic compatibility (EMC) EN 55011:1998 Kl. B, Gr.1 EN 6100-6-2:1999 Ambient temperature Operation: –10 °C ... +55 °C Operation with cooling case: –10 °C ... +75 °C Storage: –25 °C ... +70 °C Temperature drift Typ. 0.6 mm/K 2) Typ. 0.3 mm/K 3) Mechanical load Shock: (IEC 60068-2-27, –2-29) Sine: (IEC 60068-2-6) 1) Reference voltage DC 50 V PELV-voltage (EN 50178)
A B C D E F H I J K L M N O P Q R S T DML40-2-1111S01 | DML LONG RANGE DISTANCE SENSORS
4 DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11
Subject to change without notice Dimensional drawing (Dimensions in mm (inch)) DMT10-2-x1xx DML40-2-x1xx 70 (2.76) 95 (3.74) 15.5 (0.61) 213.5 (8.41) 56.5 (2.22) 139 (5.47) 18 (0.71) 102.5 (4.04) 42.5 (1.67) 21.5 (0.85) 12.5 (0.49) (2.17) 8 9 3.5 (0.14) 96 (3.78) 1.5 (0.06) 99.5 (3.92) 2 3 4 ① Dust protection tube ② Laser pointer pilot light ③ Alignment sight ④ Function indicator ⑤ Zero level ⑥ Mounting hole M6 threaded - 6 mm deep ⑦ Connector cover ⑧ PG9 ⑨ Sub-D, 9-pin Connection type DMxxx-2 RS-232/RS-422 Connector Sub-D, 9-pin 6 9 ① Pin 1 ⑤ Pin 5 ⑥ Pin 6 ⑨ Pin 9
DML40-2-1111S01 | DML LONG RANGE DISTANCE SENSORS 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 5 DMxxx-2 RS-232/RS-422 PG9 ß à 1 2 3 4 5 876 ① Pin 1 ② Pin 2 ③ Pin 3 ④ Pin 4 ⑤ Pin 5 ⑥ Pin 6 ⑦ Pin 7 ⑧ Pin 8 ⑨ Terminals ⑩ DIP switches RS-232-/RS-422 switching ⑪ Shield Connection diagram DMxxx-2 RS-232/RS-422 PG9 M L+/Q M/Q, Q A QA nc 8 1 ⑫ Not assigned Connection type RS-232/RS-422 RxD TxD GND Tx+ Tx– Rx– Rx+ RS-232 RS-422 GND5 RESET RESET
A B C D E F H I J K L M N O P Q R S T DML40-2-1111S01 | DML LONG RANGE DISTANCE SENSORS
6 DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11
Subject to change without notice Adjustment possible ß à á â ⑩ Q2 function indicator ⑪ Q1 function indicator ⑫ Operating indicator, green ⑬ Plausibility (measurement error) red Recommended accessories Other models and accessories www.sick.com/DML Brief description Type Part no. Terminal and alignment brackets Alignment unit for DMT/DML, incl. mounting material, steel, zinc coated, mounting hard- ware included BEF-GH-DME 5309130 Plug connectors and cables Head A: female connector, D-Sub, 9-pin, straight Head B: cable Cable: serial, unshielded, 3 m Connecting ca- ble (female con- nector - open) 2020319 Reflectors Reflector plate, reflective tape "Diamond Grade", 665 mm x 665 mm, material base plate: aluminum, screw connection, Screw-on, 4 hole mounting PL560DG 1016806
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com