102UMR100K ILLINOISCAPACITOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com Polyester film Epoxy-Dipped Radial Lead Inductive Film/Foil Capacitors Operating Temperature Range Capacitance Tolerance -55°C to 85°C ±10% at 1kHz, 25°C Humidity Test Load Life Insulation Resistance Voltage Range WVDC VAC 100 Dissipation Factor 1.0% at 1 kHz, 25°C 2,000 hours, +85°C with 125% rated DC voltage Capacitance Change Dissipation Factor Change Insulation Resistance ≤8% maximum <110% maximum specification ≥ 4,500 MΩ 250 hours, 95% RH, 25°C and no applied voltage Capacitance Change Dissipation Factor Change Insulation Resistance <10% of initial readings @ +25°C, 1kHz ≤ 10% of initial +25°C 1kHz ≥ Minimum 2700MΩ Self-inductance ≤1 nH/mm along the capacitor pitch Capacitance Drift Factor Capacitance Temperature Coefficient +500 ppm/°C, ± 200ppm/°C Type Dielectric Electrodes Leads Inductive film/foil Aluminum foil Tinned copper wire Coating Flame retardant epoxy sealed resin (UL 94V-O) 30,000 MΩ UMR
- Coupling
- Ceramic Disk Alternative
- Blocking
- Bypass (after 2 years) ≤ 3.0% up to 40°C
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com PART NUMBER L Max.Capacitance (µF) UMR Epoxy-Dipped Radial Lead Inductive Film/Foil Capacitors STANDARD PART LISTING H Max. T Max. S Lead Spacing d Lead Wire Diameter dv/dt (v/µ s) WVDC Convert to inches, divide by 25.4 d±.05 S±1.0 15.0 min. 1.5 max. H max. L max. T max.
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com UMR Epoxy-Dipped Radial Lead Inductive Film/Foil Capacitors ENVIRONMENTAL/ENDURANCE DATA Ω
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com FORMED LEAD TAPING FILM CAPACITORS Capacitance (µF) UMR Epoxy-Dipped Radial Lead Inductive Film/Foil Capacitors RADIAL LEAD TAPING SPECIFICATIONS FILM CAPACITORS BODY SIZE: Maximum Body Length (L): 10.5 mm Minimum Body Height (Hc): 12.5 mm Maximum Body Thickness (T): 6.5 mm INTERRUPTION OF SEQUENCE: No consecutive capacitors may be absent. Empty spaces < 0.1% of package quantity. SPLICES: Spliced tape strength is equal to non-spliced tape Splice thickness is ≤ 4 single tape layers Splice offset ± .3mm REFERENCE STANDARD: EIA RS 468A GENERAL SPECIFICATIONS TAPE REFERENCE DIMENSIONS Carrier Width (W) 18.0 ±0.5 Capacitor Bottom to Feed Hole (H) 20.0 ±.75 Height of Seating Plane (Formed Lead) H 0 16.0 ±0.5 Lead Spacing: (Formed) (F) 5.0 ±0.5 Capacitor Pitch (P) 12.7 ±1.00 Sprocket Hole Pitch (P 0) 12.7 ±0.30 Sprocket Hole Dia. (F) 4.0 ±0.30 Front Back Alignment (∆) 0 ±1.00 Case Top to Feed Hole (H1) 32.0 Max. Sprocket Hole to First Lead (P 1) 3.85 ±.70 Lead Extension (I) 2.2 Max. Component Tape Width (C) 43.2 Max. Cut Out Length (L 1) 11.0 Max. Sprocket Hole Position (W1) 9.0 ±0.5 Ammo .001- .0082 3,500 .010 - .012 3,000 .015 - .027 3,000 .032 - .047 2,000 .056 - .068 1,500 .082 - .1 1,000 Do dØ Po F H F P L Ho Hc T W C QUANTITIES PER BOX AMMO PACKAGING BOX DIMENSIONS mm LHT (max) (max) (max) 340 360 65 H LT