102MU20S

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Long life, Downsized, 125ˆ Please refer to "Product code guide (radial lead type)" Sleeve (PET : Brown) L' 15min. 4min. ПD' Пd Vent Fʶ0.5 ˗DIMENSIONS [mm] ˗PART NUMBERING SYSTEM ПD Пd F ПD' 12.5ɹɹ14.5ɹɹ16 ɹɹ18 0.6ɹɹ0.8 ɹɹ0.8 0.8 5.0 7.5 7.5 7.5 ПD+0.5max. L+1.5max.Gas escape end seal Terminal Code : E Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470ŸF:471, 1,000ŸF:102) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category E GPA A A A E A A A A A A A A SM 81 15 16 1714 1811 12 135 6 72 3 4 9 10 Higher temperature Downsized Higher ripple current GPA LXZ GXE MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS (1/3) ˗SPECIFICATIONS Items Characteristics (at 20ˆ, 120Hz) (at 20ˆ, 1 minute) (at 20ˆ, 120Hz) (at 120Hz) Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanЎ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -40 to +125ˆ 25 to 100Vdc ʶ20% (M) I=0.03CV or 4ŸA, whichever is greater. Where, I : Max. leakage current (ŸA), C : Nominal capacitance (ŸF), V : Rated voltage (V) When nominal capacitance exceeds 1,000ŸF, add 0.02 to the above value for each 1,000ŸF increase. The following specifications shall be satisfied when the capacitors are restored to 20ˆ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (3,000 hours for 25L and less) at 125 ˆ. Capacitance change ʽʶ30% of the initial value D.F. (tanЎ) ʽ300% of the initial specified value Leakage current ʽThe initial specified value The following specifications shall be satisfied when the capacitors are restored to 20ˆ after exposing them for 1,000 hours at 125ˆwithout voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ʽʶ30% of the initial value D.F. (tanЎ) ʽ300% of the initial specified value Leakage current ʽThe initial specified value Rated voltage (Vdc) tanЎ (Max.) Rated voltage (Vdc) Z(-25ˆ)/Z(+20ˆ) Z(-40ˆ)/Z(+20ˆ) (1"4FSJFT Upgrude! CAT. No. E1001M ˔Downsized, low impedance and high-ripple current version of GXE series ˔Specified ESR after endurance test ˔For high ripple current automotive applications. (Direct fuel injection and electric power steering etc.) ˔Endurance with ripple current : 3,000 to 5,000 hours at 125ˆ ˔Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ˔RoHS Compliant 25V 35V 50V 63V 80V 100V 25V 35V 50V 63V 80V 100V Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long Life, Downsized, 125ˆ (2/3) CAT. No. E1001M ˗STANDARD RATINGS ˘˘ : Enter the appropriate lead forming or taping code. (1"4FSJFT Upgrude! WV ʢVdcʣ Cap ʢμFʣ Case size ПD×L(mm) ESR (Initial) (Њmax/100kHz) -40ˆ -40ˆ ESR (End of Life) (Њmax/100kHz) Rated ripple current (mArms/125ˆ,100kHz) Part No. 20ˆ 20ˆ 1,200 1,500 1,800 1,800 2,200 2,200 2,700 2,700 2,700 2,700 3,300 3,300 3,300 3,900 3,900 4,700 4,700 5,600 5,600 6,800 680 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,200 2,700 2,700 2,700 3,300 3,300 4,700 470 560 680 680 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,800 1,800 2,200 2,200 2,700 0.22 0.19 0.17 0.17 0.13 0.14 0.11 0.10 0.13 0.16 0.095 0.095 0.10 0.090 0.12 0.081 0.099 0.077 0.086 0.072 0.22 0.17 0.19 0.13 0.17 0.14 0.11 0.10 0.16 0.095 0.13 0.095 0.10 0.12 0.081 0.090 0.099 0.077 0.086 0.072 0.33 0.28 0.24 0.22 0.18 0.20 0.15 0.16 0.16 0.20 0.13 0.13 0.13 0.15 0.10 0.11 0.12 0.090 0.10 0.080 0.044 0.037 0.033 0.034 0.029 0.028 0.024 0.023 0.026 0.032 0.021 0.021 0.023 0.020 0.024 0.018 0.022 0.017 0.019 0.016 0.044 0.033 0.037 0.029 0.034 0.028 0.024 0.023 0.032 0.021 0.026 0.021 0.023 0.024 0.018 0.020 0.022 0.017 0.019 0.016 0.065 0.055 0.048 0.043 0.041 0.040 0.034 0.036 0.031 0.039 0.028 0.029 0.027 0.029 0.023 0.024 0.026 0.020 0.022 0.018 0.18 0.11 0.13 0.10 0.11 0.080 0.090 0.070 0.080 0.090 0.080 0.060 0.070 0.060 0.070 0.050 0.080 0.040 0.070 0.030 0.18 0.13 0.11 0.11 0.10 0.080 0.090 0.070 0.090 0.080 0.080 0.060 0.070 0.070 0.050 0.060 0.080 0.040 0.070 0.030 0.18 0.11 0.13 0.10 0.11 0.080 0.090 0.070 0.080 0.090 0.080 0.060 0.070 0.070 0.060 0.050 0.080 0.040 0.070 0.030 2.2 1.3 1.6 1.3 1.3 0.90 0.80 0.70 1.1 0.60 0.50 0.70 0.90 0.70 0.50 0.50 0.60 0.60 0.50 0.40 2.2 1.6 1.3 1.3 1.3 0.90 0.80 0.70 0.60 0.50 1.1 0.70 0.90 0.50 0.50 0.70 0.60 0.60 0.50 0.40 2.2 1.3 1.6 1.3 1.3 0.90 0.80 0.70 1.1 0.60 0.50 0.70 0.90 0.50 0.70 0.50 0.60 0.60 0.50 0.40 1,820 2,100 2,280 2,280 2,560 2,620 2,970 3,060 2,860 2,490 3,340 3,380 3,160 3,590 3,010 3,730 3,390 3,970 3,840 4,230 1,820 2,280 2,100 2,560 2,280 2,620 2,970 3,060 2,490 3,340 2,860 3,380 3,160 3,010 3,730 3,590 3,390 3,970 3,840 4,230 1,500 1,740 1,900 2,040 2,150 2,190 2,510 2,470 2,620 2,240 2,870 2,840 2,940 2,750 3,300 3,230 3,140 3,720 3,510 3,940 EGPA250E ˘˘122MK20S EGPA250E˘˘152MU20S EGPA250E˘˘182MK25S EGPA250E˘˘182ML20S EGPA250E˘˘222MK30S EGPA250E˘˘222MU25S EGPA250E˘˘272MK35S EGPA250E˘˘272MU30S EGPA250E˘˘272ML25S EGPA250E˘˘272MM20S EGPA250E˘˘332MK40S EGPA250E˘˘332MU35S EGPA250E˘˘332ML30S EGPA250E˘˘392ML35S EGPA250E˘˘392MM25S EGPA250E˘˘472MU40S EGPA250E˘˘472MM30S EGPA250E˘˘562ML40S EGPA250E˘˘562MM35S EGPA250E˘˘682MM40S EGPA350E˘˘681MK20S EGPA350E˘˘102MK25S EGPA350E˘˘102MU20S EGPA350E˘˘122MK30S EGPA350E˘˘122ML20S EGPA350E˘˘122MU25S EGPA350E˘˘152MK35S EGPA350E˘˘152MU30S EGPA350E˘˘152MM20S EGPA350E˘˘182MK40S EGPA350E˘˘182ML25S EGPA350E˘˘222MU35S EGPA350E˘˘222ML30S EGPA350E˘˘222MM25S EGPA350E˘˘272MU40S EGPA350E˘˘272ML35S EGPA350E˘˘272MM30S EGPA350E˘˘332ML40S EGPA350E˘˘332MM35S EGPA350E˘˘472MM40S EGPA500E˘˘471MK20S EGPA500E˘˘561MU20S EGPA500E˘˘681MK25S EGPA500E˘˘681ML20S EGPA500E˘˘821MK30S EGPA500E˘˘821MU25S EGPA500E˘˘102MK35S EGPA500E˘˘102MU30S EGPA500E˘˘102ML25S EGPA500E˘˘102MM20S EGPA500E˘˘122MK40S EGPA500E˘˘122MU35S EGPA500E˘˘122ML30S EGPA500E˘˘122MM25S EGPA500E˘˘152ML35S EGPA500E˘˘182MU40S EGPA500E˘˘182MM30S EGPA500E˘˘222ML40S EGPA500E˘˘222MM35S EGPA500E˘˘272MM40S 12.5ʷ20 14.5ʷ20 12.5ʷ25 16ʷ20 12.5ʷ30 14.5ʷ25 12.5ʷ35 14.5ʷ30 16ʷ25 18ʷ20 12.5ʷ40 14.5ʷ35 16ʷ30 16ʷ35 18ʷ25 14.5ʷ40 18ʷ30 16ʷ40 18ʷ35 18ʷ40 12.5ʷ20 12.5ʷ25 14.5ʷ20 12.5ʷ30 16ʷ20 14.5ʷ25 12.5ʷ35 14.5ʷ30 18ʷ20 12.5ʷ40 16ʷ25 14.5ʷ35 16ʷ30 18ʷ25 14.5ʷ40 16ʷ35 18ʷ30 16ʷ40 18ʷ35 18ʷ40 12.5ʷ20 14.5ʷ20 12.5ʷ25 16ʷ20 12.5ʷ30 14.5ʷ25 12.5ʷ35 14.5ʷ30 16ʷ25 18ʷ20 12.5ʷ40 14.5ʷ35 16ʷ30 18ʷ25 16ʷ35 14.5ʷ40 18ʷ30 16ʷ40 18ʷ35 18ʷ40 Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long Life, Downsized, 125ˆ (3/3) CAT. No. E1001M ˗RA TED RIPPLE CURRENT MUL TIPLIERS ˔Frequency Multipliers 120 0.60 0.75 0.85 0.87 0.90 0.95 10k 0.95 0.95 0.98 100k 0.50 0.85 0.94 1.00 1.00 1.00 1.00 Capacitance(ŸF) Frequency(Hz) 270 to 560 0.40 0.82 0.93 1.00200 620 to 1,800 2,200 to 3,900 4,700 to 6,800 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5ˆ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. ˗STANDARD RATINGS WV ʢVdcʣ Cap ʢμFʣ Case size ПD×L(mm) ESR (Initial) (Њmax/100kHz) -40ˆ -40ˆ ESR (End of Life) (Њmax/100kHz) Rated ripple current (mArms/125ˆ,100kHz) Part No. 100 20ˆ 20ˆ ˘˘ : Enter the appropriate lead forming or taping code. 470 680 680 820 1,000 1,000 1,200 1,200 1,500 1,800 330 470 470 560 560 680 680 820 820 1,200 200 270 300 360 390 470 510 560 620 750 0.58 0.48 0.49 0.41 0.33 0.34 0.26 0.26 0.21 0.18 0.58 0.48 0.49 0.41 0.34 0.33 0.26 0.26 0.21 0.18 0.88 0.73 0.72 0.62 0.50 0.50 0.39 0.39 0.32 0.27 0.085 0.061 0.070 0.053 0.044 0.049 0.036 0.041 0.035 0.030 0.085 0.061 0.070 0.053 0.049 0.044 0.041 0.036 0.035 0.030 0.11 0.091 0.079 0.068 0.064 0.056 0.054 0.046 0.044 0.039 0.19 0.14 0.19 0.090 0.070 0.14 0.060 0.090 0.070 0.060 0.19 0.14 0.19 0.090 0.14 0.070 0.090 0.060 0.070 0.060 0.25 0.22 0.18 0.13 0.15 0.090 0.13 0.080 0.090 0.080 3.0 2.0 3.0 1.3 0.90 2.0 0.80 1.3 0.90 0.80 3.0 2.0 3.0 1.3 2.0 0.90 1.3 0.80 0.90 0.80 3.9 3.9 2.7 1.9 2.7 1.3 1.9 1.1 1.3 1.1 1,790 2,030 1,910 2,330 2,580 2,280 2,900 2,580 2,890 3,210 1,790 2,030 1,910 2,330 2,280 2,580 2,580 2,900 2,890 3,210 1,580 1,690 1,990 2,250 2,110 2,500 2,410 2,700 2,690 2,880 EGPA630E ˘˘471ML20S EGPA630E˘˘681ML25S EGPA630E˘˘681MM20S EGPA630E˘˘821ML30S EGPA630E˘˘102ML35S EGPA630E˘˘102MM25S EGPA630E˘˘122ML40S EGPA630E˘˘122MM30S EGPA630E˘˘152MM35S EGPA630E˘˘182MM40S EGPA800E˘˘331ML20S EGPA800E˘˘471ML25S EGPA800E˘˘471MM20S EGPA800E˘˘561ML30S EGPA800E˘˘561MM25S EGPA800E˘˘681ML35S EGPA800E˘˘681MM30S EGPA800E˘˘821ML40S EGPA800E˘˘821MM35S EGPA800E˘˘122MM40S EGPA101E˘˘201ML20S EGPA101E˘˘271MM20S EGPA101E˘˘301ML25S EGPA101E˘˘361ML30S EGPA101E˘˘391MM25S EGPA101E˘˘471ML35S EGPA101E˘˘511MM30S EGPA101E˘˘561ML40S EGPA101E˘˘621MM35S EGPA101E˘˘751MM40S 16 ʷ20 16 ʷ25 18 ʷ20 16 ʷ30 16 ʷ35 18 ʷ25 16 ʷ40 18 ʷ30 18 ʷ35 18 ʷ40 16 ʷ20 16 ʷ25 18 ʷ20 16 ʷ30 18 ʷ25 16 ʷ35 18 ʷ30 16 ʷ40 18 ʷ35 18 ʷ40 16 ʷ20 18 ʷ20 16 ʷ25 16 ʷ30 18 ʷ25 16 ʷ35 18 ʷ30 16 ʷ40 18 ʷ35 18 ʷ40 (1"4FSJFT Upgrude! Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.