1029300000

1029300000 WEIDMULLER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Creation date October 4, 2021 2:44:42 PM CEST Catalogue status 27.09.2021 / We reserve the right to make technical changes. 1 WFF 35/AH Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Product image Similar to illustration Klippon® Connect with stud Technology Our stud terminals are an established, robust connection alternative for particularly harsh environments. The extensive accessories and quality workmanship ensure high productivity in planning and installation – and sustainable safety in operation.. General ordering data Version Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 35 mm², Threaded stud connection, Direct mounting Order No. 1029300000 Type WFF 35/AH GTIN (EAN) 4008190139148 Qty. 5 pc(s).

WFF 35/AH Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date October 4, 2021 2:44:42 PM CEST Catalogue status 27.09.2021 / We reserve the right to make technical changes. 2 Dimensions and weights Depth 51 mm Depth (inches) 2.008 inch Depth including DIN rail 59.5 mm Height 107 mm Height (inches) 4.213 inch Width 27 mm Width (inches) 1.063 inch Weight 106.6 g Net weight 93.71 g Temperatures Storage temperature -25 °C...55 °C Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex- Certificate of Conformity Continuous operating temp., min. -50 °C Continuous operating temp., max. 120 °C Material data Material Wemid Colour dark beige UL 94 flammability rating V-0 Rating data IECEx/ATEX Certificate No. (ATEX) DEMKO15ATEX1357U Certificate No. (IECEX) IECEXULD15.0004U Max. voltage (ATEX) 1100 V Current (ATEX) 125 A Wire cross section max. (ATEX) 35 mm² Max. voltage (IECEX) 1100 V Current (IECEX) 125 A Wire cross section max. (IECEX) 35 mm² Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex- Certificate of Conformity Marking EN 60079-7 Ex eb II C Gb Ex 2014/34/EU label II 2 G D System specifications End cover plate required No Number of levels 1 Number of clamping points per level 2 Levels cross-connected internally No PE connection No Rail TS 35 Additional technical data Explosion-tested version Yes Installation advice Direct mounting Number of similar terminals 1 Open sides closed Type of mounting Snap-on CSA rating data Certificate No. (CSA) 200039-1244019 Current size C (CSA) 130 A Voltage size C (CSA) 600 V Wire cross section max. (CSA) 2 AWG Wire cross section min. (CSA) 14 AWG

WFF 35/AH Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date October 4, 2021 2:44:42 PM CEST Catalogue status 27.09.2021 / We reserve the right to make technical changes. 3 Conductors for clamping (rated connection) 2 x cable lugs DIN 46 234 2.5 to 35 mm² 2 x cable lugs DIN 46 235 6...25 mm² Clamping range, max. 50 mm² Clamping range, min. 2.5 mm² Number of connections 2 Stud size for spade connection M 6 Tightening torque, max. 6 Nm Tightening torque, min. 3 Nm Type of connection Threaded stud connection General Installation advice Direct mounting Rail TS 35 Rating data Rated cross-section 35 mm² Rated voltage 1,000 V Rated DC voltage 1,000 V DC Rated current 125 A Current at maximum wires 150 A Volume resistance according to IEC 60947-7-x 0.26 mΩ Rated impulse withstand voltage 8 kV Power loss in accordance with IEC 60947-7-x 4 W Pollution severity 3 UL rating data Certificate No. (UR) E60693 Conductor size Factory wiring max. (UR) 2 AWG Conductor size Factory wiring min. (UR) 14 AWG Conductor size Field wiring max. (UR) 2 AWG Conductor size Field wiring min. (UR) 14 AWG Current size C (UR) 115 A Voltage size C (UR) 1000 V Classifications ETIM 6.0 EC000897 ETIM 7.0 EC000897 ETIM 8.0 EC000897 ECLASS 9.0 27-14-11-20 ECLASS 9.1 27-14-11-20 ECLASS 10.0 27-14-11-20 ECLASS 11.0 27-14-11-20 Approvals Approvals ROHS Conform UL File Number Search E60693

WFF 35/AH Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date October 4, 2021 2:44:42 PM CEST Catalogue status 27.09.2021 / We reserve the right to make technical changes. 4 Downloads Approval/Certificate/Document of Conformity Attestation of Conformity Attestation of Conformity CB Certificate EAC certificate DNVGL certificate MARITREG Certificate CCC Ex Certificate ATEX Certificate IECEx Certificate Declaration of Conformity Declaration of Conformity all terminals Engineering Data STEP Engineering Data EPLAN, WSCAD, Zuken E3.S User Documentation StorageConditionsTerminalBlocks WFF range for 1500 VDC applications DIRECT MOUNTING WFF TERMINAL BLOCKS NTI WFF 35 Catalogues Catalogues in PDF-format Brochures

WFF 35/AH Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Accessories Creation date October 4, 2021 2:44:42 PM CEST Catalogue status 27.09.2021 / We reserve the right to make technical changes. 5 Slotted screwdriver VDE insulated slot-head screwdriver, SDI DIN 7437, ISO 2380/2, drive output acc. to DIN 5264, ISO 2380/1. SoftFinish grip General ordering data VersionType SDIS 0.6X3.5X100 Order No. 9008390000 GTIN (EAN) 4032248056354 Qty. 1 pc(s). Screwdriver, Screwdriver WF / WFF-Series A partition plate is used for the optical separation of circuits or used for electrical isolation from neighbouring cross-connectors. In contrast to the end plate, the contour can be larger than the adjacent terminal blocks. However, it should not be smaller, as otherwise the required clearance and creepage distances within the application can no longer be maintained. General ordering data VersionType WTW WFF35 Order No. 1067100000 GTIN (EAN) 4008190053253 Qty. 10 pc(s). Bolt-type screw terminals, Partition plate, grey, 2 mm

WFF 35/AH Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Accessories Creation date October 4, 2021 2:44:42 PM CEST Catalogue status 27.09.2021 / We reserve the right to make technical changes. 6 Test plugs Test adapters and test plugs are used for the electrical connection between terminal blocks and the test equipment. In this way, an electrical contact can be established in the wired state and measurements can be done easily. General ordering data VersionType PS 4 F.STB 4 Order No. 0299600000 GTIN (EAN) 4008190074043 Qty. 20 pc(s). Accessories, Test plug Protective covers Protective covers or protective caps are attached to the respective connection area of the terminal blocks. They provide protection against electric shock caused by accidental contact with live parts due to operation or faults. General ordering data VersionType WAH 35 BL Order No. 1064480000 GTIN (EAN) 4008190113308 Qty. 20 pc(s). Bolt-type screw terminals, Hood, blue, 26 mm VersionType WAP WFF35 Order No. 1069700000 GTIN (EAN) 4008190104023 Qty. 20 pc(s). Bolt-type screw terminals, cover plate, dark beige, 2 mm VersionType WAH 35 Order No. 1064460000 GTIN (EAN) 4008190176587 Qty. 20 pc(s). Bolt-type screw terminals, Hood, beige, 26 mm

WFF 35/AH Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Accessories Creation date October 4, 2021 2:44:42 PM CEST Catalogue status 27.09.2021 / We reserve the right to make technical changes. 7 W-Series Weidmüller's range of products includes end brackets that guarantee a permanent, reliable mounting on the terminal rail and prevent sliding. Versions with and without screws are available. The end brackets include marking options, also for group markers, and also a test plug holder. General ordering data VersionType WEW 35/1 Order No. 1059000000 GTIN (EAN) 4008190172282 Qty. 50 pc(s). W-Series, End bracket WF/WFF-Series The additional connection enables a separate voltage tap. This can be used, for example, for the emergency power supply before the main switch or simply as an additional connection within the application. General ordering data VersionType WZAF 35 Order No. 1070500000 GTIN (EAN) 4008190024512 Qty. 10 pc(s). W-Series, Additional connection

WFF 35/AH Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Accessories Creation date October 4, 2021 2:44:42 PM CEST Catalogue status 27.09.2021 / We reserve the right to make technical changes. 8 WS 12/5 WS/ DEK MultiMark terminal markers use an innovative composite material made from two components. The hard base contour of the marker snaps securely into the connector. The elastic surface finish makes the marker easy to mount. This specially punched material enables the strips to be stretched to accommodate the slight variations in spacing that tend to add up, especially with long terminal blocks. Another advantage: the excellent printability of the surface material guarantees durable and wear- resistant labelling. A print resolution of 300 dpi also produces a very legible script. Your benefits with MultiMark

• Firm hold and durable printing
• Continuous strips save installation time
• Easy mounting thanks to an innovative composite material
• Large label field for optimal legibility
• High flexibility thanks to manufacturer independence General ordering data VersionType WS 12/5 MM WS Order No. 2007190000 GTIN (EAN) 4050118392036 Qty. 800 pc(s). WS, Terminal marker, 12 x 5 mm, Weidmueller, white Blank WS markers are the perfect match for the W-series connectors. Thanks to their system compatibility, the WS tags can also be used with the I-series and the Z- series. The large marking surfaces do not only permit long character strings but also multi-line text. WS markers are ideal for labels with long, customised character strings. Thanks to the proven MultiCard format, printing with PrintJet CONNECT oder/or Plotter is possible.
• Can be fitted in strips or individually
• Markers in proven MultiCard format For custom printing: Please send us a file of our labeling software M-Print PRO or M-Print PRO Online (without installation) for your labeling specifications. General ordering data VersionType WS 12/5 MC NE WS Order No. 1609860000 GTIN (EAN) 4008190203481 Qty. 720 pc(s). WS, Terminal marker, 12 x 5 mm, Pitch in mm (P): 5.00 Weidmueller, Allen-Bradley, white

WFF 35/AH Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Accessories Creation date October 4, 2021 2:44:42 PM CEST Catalogue status 27.09.2021 / We reserve the right to make technical changes. 9 Blank The Dekafix (DEK) marker is the universal marker for all conductor and plug-in connectors as well as for electronic sub-assemblies. The system is ideal for short number sequences and covers a wide range of ready-printed markers. Strips for fast installation in only one work step. The printing is easy to read, rich in contrast and available in various widths.

• Large range of ready-to-use markers
• Strips for fast installation
• Terminal markers, suitable for all Weidmüller cable connectors
• Available as blank MultiCard or with standard printing For custom printing: Please send us a file of our labeling software M-Print PRO or M-Print PRO Online (without installation) for your labeling specifications. General ordering data VersionType DEK 5/5 MC NE WS Order No. 1609801044 GTIN (EAN) 4008190397111 Qty. 1,000 pc(s). Dekafix, Terminal marker, 5 x 5 mm, Pitch in mm (P): 5.00 Weidmueller, white Standard Screwable cross-connections are easy to mount and de mount. Thanks to the big contact surface, even high currents can be transmitted with maximum contact reliability. General ordering data VersionType WQL 2 WFF35 Order No. 1064900000 GTIN (EAN) 4008190112745 Qty. 5 pc(s). Bolt-type screw terminals, Cross-connector, Number of poles: 2 VersionType WQL 3 WFF35 Order No. 1065400000 GTIN (EAN) 4008190065812 Qty. 5 pc(s). Bolt-type screw terminals, Cross-connector, Number of poles: 3