KT10W-2P2115 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
A B C D E F H I J K L M N O P Q R S T KT10W-2P2115 | KT10 CONTRAST SENSORS
Ordering information
Type Part no. KT10W-2P2115 1029070 Other models and accessories www.sick.com/KT10 Detailed technical data
Features
Dimensions (W x H x D) 30.4 mm x 53 mm x 80 mm Sensing distance 10 mm 1) Sensing distance tolerance ± 3 mm Housing design (light emission) Rectangular Light source LED, RGB 2) Wave length 640 nm, 525 nm, 470 nm Light emission Long and short side of housing, exchangeable Light spot size 0.8 mm x 4 mm Light spot direction Horizontal 3) Adjustment Teach-in button Teach-in mode Static 2-point teach-in Dynamic teach-in (min/max) Function Automatic drift correction 1) From front edge of lens. 2) Average service life: 100,000 h at TU = +25 °C. 3) In relation to long side of housing. Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 5 Vpp 2) Power consumption < 120 mA 3) 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) AT > 200 µs. 7) Reference voltage DC 50 V.
2 REGISTRATION SENSORS | SICK Online data sheet | 2017-12-19 15:43:33
Subject to change without notice
KT10W-2P2115 | KT10 CONTRAST SENSORS Switching frequency 25 kHz 4) Response time 20 µs 5) Jitter < 10 µs Switching output PNP Switching output (voltage) PNP: HIGH = VS– ≤ 2 V / LOW approx. 0 V Output current Imax. 100 mA Input, teach-in (ET) PNP Teach: U = 10 V ... < UV Run: U < 2 V Input, blanking input (AT) PNP Blanked: U > 10 V ... < Uv Free-running: U < 2 V 6) Retention time (ET) 25 ms, non-volatile memory Time delay 20 ms, adjustable Connection type Male connector M12, 5-pin Protection class II 7) Circuit protection UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression Outputs overcurrent and short-circuit protected Enclosure rating IP67 Weight 400 g Housing material Zinc diecast 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) AT > 200 µs. 7) Reference voltage DC 50 V. Ambient data Ambient operating temperature –10 °C ... +55 °C Ambient storage temperature –10 °C ... +75 °C Shock load According to IEC 60068 UL File No. NRKH.E181493 & NRKH7.E181493 Classifications ECl@ss 5.0 27270906 ECl@ss 5.1.4 27270906 ECl@ss 6.0 27270906 ECl@ss 6.2 27270906 ECl@ss 7.0 27270906 ECl@ss 8.0 27270906 ECl@ss 8.1 27270906 ECl@ss 9.0 27270906 ETIM 5.0 EC001820 2017-12-19 15:43:33 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T KT10W-2P2115 | KT10 CONTRAST SENSORS ETIM 6.0 EC001820 UNSPSC 16.0901 39121528 Dimensional drawing (Dimensions in mm (inch)) 9 (0.35) 28 (1.10) 56 (2.20) (0.83) 30.4 (1.20) 2.5 (0.10) Ø 25.5 (1.00) (0.67) (0.51) 28 (1.10) 52 (2.05) 80 (3.15) 25 (0.98) 40 (1.57) 53 (2.09) (0.12) 2 1 Sensing distance 10 mm (0.39 inch) ① Lens (light emission) ② M5 threaded mounting hole, 5.5 mm deep ③ See dimensional drawing of lens ④ Blind screw can be replaced by pos. 1 ⑤ Connector M12 (rotatable up to 90°) Adjustments SET – + Q Bank Timer ① Function signal indicators (yellow) ② Bar graph (green) ③ Teach-in pushbutton / +/– pushbutton
4 REGISTRATION SENSORS | SICK Online data sheet | 2017-12-19 15:43:33
Subject to change without notice
KT10W-2P2115 | KT10 CONTRAST SENSORS Connection diagram Cd-313 + (L+) AT - (M) BN WH BU BK 4 Teach GY 5 Q Concept of operation Teach-in static Press and hold SET button > 1 s. Red emitted light and yellow LED flash. 1. Position mark Press and hold SET button > 1 s. Yellow LED goes out. Optimum emitted light is selected. 2. Position background Note The bar display visualizes the detection reliability during teach-in. The more LEDs that illuminate, the better the teach-in:
1 LED illuminates = operation not reliable – lowest contrast difference
≤ 4 LEDs illuminate = operation OK – sufficient contrast difference > 4 LEDs illuminate = reliable operation – high contrast difference Switching characteristics Light/dark setting is defined using teach-in sequence. The switching threshold is set in the center between the background and the mark. Teach-in and the light/dark setting can also be configured using an external control signal. Internal signal received Dark switching Light switching Output Q Output Q Switching threshold Switching threshold Internal signal received Example SET – + Q Bank Timer SET – + Q Bank Timer 2017-12-19 15:43:33 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T KT10W-2P2115 | KT10 CONTRAST SENSORS Teach-in dynamic Press and hold SET button. Emitted light turns white. 1. Position background Hold down SET button. 2. Move at least one repeat length using the light spot Release SET button. SET – + Q Bank Timer SET – + Q Bank Timer SET – + Q Bank Timer Characteristic curve KT8 CAN, KT10-2 (0.43) 0 12 (0.47) 12.5 (0.49) (0.51) (0.55) (0.59) 100Relative sensitivity in % Sensing distance in mm (inch) Recommended accessories Other models and accessories www.sick.com/KT10 Brief description Type Part no. Universal bar clamp systems Plate G for universal clamp bracket, steel, zinc coated, universal clamp and mounting hardware included BEF-KHS-G01 2022464 Plate K for universal clamp bracket, steel, zinc coated, universal clamp and mounting hardware included BEF-KHS-K01 2022718
6 REGISTRATION SENSORS | SICK Online data sheet | 2017-12-19 15:43:33
Subject to change without notice
KT10W-2P2115 | KT10 CONTRAST SENSORS Brief description Type Part no. Universal clamp bracket for rod mounting, steel, zinc coated, without mounting hard- ware BEF-KHS-KH1 2022726 Mounting bar, straight, 200 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-A 4056054 Mounting bar, straight, 300 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-B 4056055 Mounting bar, L-shaped, 150 mm x 150 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-A 4056052 Mounting bar, L-shaped, 250 x 250 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-B 4056053 Plug connectors and cables Head A: female connector, M12, 5-pin, straight Head B: open cable ends Cable: PVC, unshielded, 2 m DOL-1205-G02M 6008899 Head A: female connector, M12, 5-pin, straight Head B: open cable ends Cable: PVC, unshielded, 5 m DOL-1205-G05M 6009868 Head A: female connector, M12, 5-pin, straight Head B: open cable ends Cable: PVC, unshielded, 10 m DOL-1205-G10M 6010544 Head A: female connector, M12, 5-pin, angled Head B: open cable ends Cable: PVC, unshielded, 2 m DOL-1205-W02M 6008900 Head A: female connector, M12, 5-pin, angled Head B: open cable ends Cable: PVC, unshielded, 5 m DOL-1205-W05M 6009869 Head A: female connector, M12, 5-pin, angled Head B: open cable ends Cable: PVC, unshielded, 10 m DOL-1205-W10M 6010542 Head A: female connector, M12, 5-pin, straight Cable: unshielded DOS-1205-G 6009719 Head A: female connector, M12, 5-pin, angled Head B: - Cable: unshielded DOS-1205-W 6009720 2017-12-19 15:43:33 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 7
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com