10214-1210VE 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Surface Mount Right Angle Receptacle - Shielded 102 Series Physical Electrical Environmental *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Insulation Material: Glass Reinforced Polyester (PCT) Flammability: UL 94V-0 Color: Beige Contact Material: Copper Alloy (C521) Plating Underplating: 80 µ″ (2.0 µm) Nickel - QQ-N-290, Class 2 Wiping Area: 30 µ″ (0.76 µm) Min Gold - MIL-G-45204, Type II, Grade C Solder Tails: See ordering information Shroud & Latch Hook Material: Steel Plating: Nickel Screw Lock Material: Copper Alloy (C521) Plating: Tin Marking: 3M Logo & Part Number Current Rating: 1 A Insulation Resistance: > 5 × 108Ω at 500 VDC Withstanding Voltage: 500 Vrms for 1 Minute Temperature Rating: -55°C to +105°C Process: Surface mount compatible - max. temp. 240°-250°C for 10 seconds. TS-0755-10 Sheet 1 of 3

  • Wiper-on-wiper contact for reliable repetitive plugging
  • Ultra-low signal skew for high data rate transmission
  • Interface latch design for connection stability
  • MDR digital LCD interface as a 20 or 26 contact connector
  • Contacts: 14, 20, 26, 40 and 50
  • RoHS* compliant version (-PE plating suffix) available Date Modified: April 5, 2005 UL File No.: E68080

http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 102XX-1210XE 3M™ Mini D Ribbon (MDR) Connectors .050″ Surface Mount Right Angle Receptacle - Shielded 102 Series Contact Quantity 3M Part Number Dimensions .0 .00 .000 [ ] Dimensions for Reference Onl y Tolerance Unless Noted [m m ] Inch TS-0755-10 Sheet 2 of 3 Contact Quantity (See Table)

Ordering Information

Note: Use (M2.5x8 mm) screws to mount to panel with max. thickness of 2.0 mm. Position 1 C B .189 [ 4.80 ] last position 2X M2.5 Thread (see note in ordering info) .248 [ 6.30 ] Positioning Boss (2x) Position A E D .394 [ 10.00 ] .203 [ 5.15 ] .138 [ 3.5 ] .025 [ 0.635 ] .010 nom. [ 0.25 ] .19 [ 4.8 ] .368 [ 9.35 ] .187 [ 4.75 ] 2X M2.5 Thread last position position above last position position below pos. 1 position 1position 2 .047 [ 1.20 ] Solder tail plating: V = tin-lead over Ni P = flash gold over Ni (RoHS compliant)

http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Surface Mount Right Angle Receptacle - Shielded 102 Series Contact Quantity Dimensions A ± .002 B ± .002 C ± .002 Contact Quantity DE 26 1.09 [ 27.6 ] 1.231 [ 31.26 ] 40 1.44 [ 36.5 ] 1.581 [ 40.15 ] 50 1.69 [ 42.8 ] 1.830 [ 46.50 ] Recommended Board Layout A C .025 ± .0008 B PCB Ref. Edge .016 ± .0004 .093 ± .0004 .088 [ 2.223 ] .187 max. [ 4.75 ] .165 [ 4.2 ] .118 [ 3.0 ] .122 [ 3.1 ] .138 [ 3.5 ] .256 [ 6.5 ] Solder Pads for Solder Tail (See below for more detail) ∅.079 + .004 (2X) Positioning Hole (viewed from connector side) center spacing - .000 center spacing Lockstand Solder Pad Outline ∅.110 ± .004 (2X) Screw Lock (see notes below) **Notes: 1. Plated through holes for .062″ board thickness. 2. Use mounting screws ( M2.5 ) to fasten to board. TS-0755-10 Sheet 3 of 3 Recommended Panel Cut-out D ± .004 E ± .004 R .060 [ 1.50 ] Note: Panel thickness .079 [ 2.00 ] Max. .319 ± .004 [ 8.1 ] Connector Position (Top Row) 20 19 18 17 16 15 14 13 12 11 10 987654321 PCB Ref. Edge 20 Pos. 10 9 8 7 22 21 20 19 18 17 16 15 14 654321 30 29 28 27 26 25 24 23 22 2140 39 38 37 36 35 34 33 32 31 1 0 98765432120 1119 18 17 16 15 14 13 12 PCB Ref. Edge PCB Ref. Edge 26 25 24 13 12 11 26 Pos. 40 Pos. Solder Tail Layout Detail (#'s Correspond to Connector Contact # Shown on Previous Page) Last Pos. Last Pos. Last Pos. Connector Position (Top Row) Connector Position Position (Bottom Row) Position (Bottom Row) Position (Bottom Row) 1 0 987 33 32 31 30 29 28 27 2649 654321 PCB Ref. Edge 43 42 41 40 39 38 37 36 35 1150 Pos. 19 18 17 16 15 14 13 12 Last Pos. Connector Position Position (Bottom Row) 22 212324 45464748 Connector Position (Top Row) 10 9 8 14 13 12 11 654321 PCB Ref. Edge 14 Pos. Last Pos. Position (Bottom Row)

Printed in USA. © 3M 2005 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/esd Minimum 10% Post-consumer Fiber Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.