10202

X670G2 EXTREMENETWORKS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

• X670-G2-48x-4q – 48 ports of 1/10Gb SFP+ with 4 ports of 10/40Gb QSFP+
• X670-G2-72x – 72 ports of 1/10Gb SFP+ in

1 RU form factor

• Full ExtremeXOS® feature set supporting switching, routing, SDN, Data Center Bridging, MPLS, and Audio Video Bridging
• Controlling aggregation switch for V300 and V400 edge devices with Extreme Extended Edge Switching
• SummitStack™ support enables fle xible stacking c onfigur ations with other stackable ExtremeXOS product lines
• IEEE 1588 PTP timing with integrated timing output ports
• All c onfigur ations provide non- blocking, line rate performance
• Low latency cut-through mode
• Front-to-Back or Back-to-Front air flo w Scalable advanced 10Gb aggregation switch The X670-G2 product family provides high density 10 Gigabit Ethernet and 40 Gigabit Ethernet switching in a small 1RU form factor. With its versatile design, the X670- G2 provides high density Layer 2/3 10Gb networking with low latency cut-through switching, and IPv4 and IPv6 unicast and multicast routing. This enables the X670-G2 to be fle xibly deployed in enterprise aggregation or core backbone environments. The X670-G2 can additionally serve as the controlling aggregation switch within Extreme's Extended Edge Switching solution. The X670-G2 comes in two models:
• X670-G2-48x-4q– 48 ports of 1/10Gb SFP+ with 4 ports of 10/40Gb QSFP+
• X670-G2-72x– 72 ports of 1/10Gb SFP+ in 1 RU form factor The X670-G2-48x-4q supports four QSFP+ ports of 40 GbE. Each 40 Gigabit Ethernet port can be independently c onfigur ed as 40 Gigabit Ethernet or 4 x 10 Gigabit Ethernet. The X670-G2-72x model supports 72 ports of native 1Gb/10Gb SFP+ ports in a single compact system without the requirement to use break-out cables to achieve high density 10Gb connections. Data Sheet X670-G2 Series www.extremenetworks.com 1

The X670-G2 supports 4 different methods of stacking: SummitStack-V, SummitStack-V80, SummitStack-V160, and SummitStack-V320. SummitStack-V—FlexibleStacking Over 10 Gigabit Ethernet ExtremeXOS supports the SummitStack-V capability using 2 of the native 10GbE ports on the faceplate as stacking ports, enabling the useof standard cabling and optics technologies used for 10GbE SFP+, SummitStack-V provides long-distance stacking connectivity of up to 40 km while reducing the cable complexity of implementing a stacking solution. SummitStack-V is compatible with X440, X440-G2, X450, X450-G2, X460, X460-G2, X480, X670, X670V, and X770 switches running the same version of ExtremeXOS. SummitStack-V enabled 10GbE ports must be physically direct-connected. SummitStack-V80/V160/V320—Flexible Stacking Over 40 Gigabit Ethernet The X670-G2-48x-4q also supports high-speed 80Gbps, 160Gbps, and 320Gbps stacking using QSFP+ ports, which is ideal for demanding applications where a high volume of tr affic traverses through the stacking links, yet bandwidth is not compromised through stacking. SummitStack- V80, -V160, and -V320 can support passive copper cables (up to 1m), active multi-mode fiber cable (up to 100m), and QSFP+ optical transceivers for 40GbE up to 10 km. With SummitStack, the X670-G2-48x-4q provides a fle xible stacking solution inside the data center or central offic e to create a virtualized switching infrastructure across rows of racks. ExtremeXOS Intelligent L2 and L3 Switching The X670-G2 supports sophisticated and intelligent Layer 2 switching, as well as Layer 3 IPv4/IPv6 routing including policy-based switching/routing, Provider Bridges, bidirectional ingress and egress Access Control Lists, and bandwidth control by 8 Kbps granularity both for ingress and egress. To provide scalable network architectures used mainly for Carrier Ethernet network deployment, the X670-G2 supports MPLS LSP-based Layer 3 forwarding and Hierarchical VPLS (H-VPLS) for transparent LAN services. With H-VPLS, transparent Layer 3 networks can be extended throughout the Layer 3 network cloud by using a VPLS tunnel between the regional transparent LAN services typically built by Provider Bridges (IEEE 802.1ad) technology.

1588 Precision Time Protocol (PTP)*

The X670-G2 offers Boundary Clock (BC), Transparent Clock (TC), and Ordinary Clock (OC) for synchronizing phase and frequency and allowing the network and the connected devices to be synchronized down to microseconds of accuracy over Ethernet connection. *1588 PTP supported only in EXOS Release 30.6 and earlier Audio Video Bridging (AVB) The X670-G2 series supports IEEE 802.1 Audio Video Bridging to enable reliable, real-time audio/video transmission over Ethernet. AVB technology delivers the quality of service required for today’s high- definition and time- sensitive multimedia streams. Low Latency Switching for Cluster Computing The X670-G2 can achieve latency less than 600 nanoseconds and supports cut-through switching for latency-sensitive cluster computing. Extended Edge Switching The X670-G2 supports Extreme Extended Edge Switching, an innovative solution that simplifies the deployment and operation of edge switches. With this solution, the X670-G2 can be meshed with economical V300 or V400 Series access devices to form a single logical switch. Advanced X670- G2 services can then be seamlessly delivered to the V300 or V400 edge switches. The result is a simplified operational model that reduces costs. www.extremenetworks.com 2

Modular Operating System for Non- Stop Operation Loadable Software Modules The modular design of the ExtremeXOS OS allows the adding or upgrading of individual software modules dynamically without requiring a system reboot, leading to higher availability in the network. Preemptive Multitasking and Protected Memory The X670-G2 series switches allow each of many applications— such as Open Shortest Path First (OSPF) and Spanning Tree Protocol (STP)—to run as separate OS processes that are protected from each other. This drives increased system integrity and inherently protects against cross-platform DoS attacks. Process Monitoring and Restart ExtremeXOS increases network availability using process monitoring and restart. Each independent OS process is monitored in real time. If a process becomes unresponsive or stops running, it can be automatically restarted. Rich OAM Suite – CFM, Y.1731, BFD The X670-G2 series switches supports a rich suite of protocols to help with Operations, Administration and Maintenance. Connectivity Fault Management (CFM) allows detection, v er ification, and isolation of connectivity failures in virtual bridged LAN. Y.1731 is largely similar to CFM but also supports performance management by way of frame delay and frame delay variation measurements. Bidirectional Forwarding Detection (BFD) is a hello protocol that provides the rapid detection of failures in the forwarding path and helps the separation of control plane connectivity from forwarding plane connectivity. By having multiple control plane protocols like OSPF or MPLS rely on BFD to detect forwarding plane connectivity failures, network operators can benefit from simpler network pr ofiling and planning, and consistent and predictable re-convergence times. High Availability Network Protocols Ethernet Automatic Protection Switching (EAPS) EAPS allows the IP network to provide the level of resiliency and up time that users expect from their traditional voice network. EAPS is more adaptable than Spanning Tree or Rapid Spanning Tree protocols and can achieve sub-second recovery that delivers consistent failover regardless of the number of VLANs, network nodes, or network topology in Extreme Networks-recommended c onfigur ations. EAPS functionality increases network recovery time, which results in significant reduction in Voice-over IP call drop rates and improvement in digital video performance in supported solution c onfigur ations. Spanning Tree/RAPID Spanning Tree Protocols TheX670-G2 supports Spanning Tree (802.1D), Per VLAN Spanning Tree (PVST+), Rapid Spanning Tree (802.1w) and Multiple Instances of Spanning Tree (802.1s) protocols for Layer 2 resiliency. Software-Enhances Availability Software-enhanced availability allows users to remain connected to the network even if part of the network infrastructure is down. The X670- G2 continuously checks for problems in the unlink connections using advanced Layer 3 protocols such as OSPF, VRRP and Extreme Standby Router Protocol (ESRP, supported in Layer 2 or Layer 3), and dynamically routes tr affic around the problem. Equal Cost Multipath Equal Cost Multipath (ECMP) routing allows uplinks to be load balanced for performance and cost savings while also supporting redundant fail over. If an unlink fails, tr affic is automatically routed to the remaining up links and connectivity is maintained. Link Aggregation (802.3AD) Link aggregation allows trunking of up to 32 links on a single logical connection, for up to 320 Gbps of redundant bandwidth per logical connection. Multi-Switch LAG (MLAG) MLAG can address bandwidth limitations and improve network resiliency, in part by routing network tr affic around bottlenecks, reducing the risks of a single point of failure, and allowing load balancing across multiple switches. Hardware Redundancy X670-G2 series switches support a dual redundant AC/DC power supply to provide high availability. The power supply can be hot-swapped and replaced should it fail. The X670-G2 also supports standardized N+1 redundant hot-swappable fan units. www.extremenetworks.com 3

Robust IP and MAC Security Framework Media Access Control (MAC) Lockdown MAC security allows the lockdown of a port to a given MAC address and limiting the number of MAC addresses on a port. This capability can be used to dedicate ports to spec ific hosts or devices such as VoIP phones or printers and avoid abuse of the port—a capability that can be especially useful in environments such as hotels. In addition, an aging timer can be c onfigur ed for the MAC lockdown, protecting the network from the effects of attacks using (often rapidly) changing MAC addresses. IP Security The ExtremeXOS IP security framework helps protect the network infrastructure, network services such as DHCP and DNS, and host computers from spoofing and attacker-in-the-middle attacks. It also protects the network from statically c onfigur ed and/or spoofed IP addresses and builds an external trusted database of MAC/IP/port bindings providing the tr affic ’ s source from a spec ific address for immediate defense. Identity Management Identity Manager allows network managers to track users who access their network. User identity is captured based on NetLogin authentication, LLDP discovery and Kerberos snooping. ExtremeXOS uses the information to then report on the MAC, VLAN, computer hostname, and port location of the user. Further, Identity Manager can create both roles and policies, and then bind them together to create role-based pr ofiles based on organizational structure or other logical groupings, and apply them across multiple users to allow appropriate access to network resources. In addition, support for Wide Key ACLs further improves security by going beyond the typical source/destination and MAC address as identification criteria access mechanism to provide fil t er ing capabilities. Threat Detection and Response Clear-Flow Security Rules Engine CLEAR-Flow Security Rules Engine provides fir st - or der threat detection and mitigation, and mirrors tr affic to security appliances for further analysis of suspicious tr affic in the network. sFlow The X670-G2 series supports hardware-based sFlow® sampling that provides the ability to sample application- level tr affic flo w s on all interfaces simultaneously. Port Mirroring To allow threat detection and prevention, the X670-G2 supports many-to- one and one-to-many port mirroring. This allows the mirroring of tr affic to an external network appliance such as an intrusion detection device for trend analysis or for utilization by a network administrator for diagnostic purposes. Port mirroring can also be enabled across switches in a stack. Line-Rate Ingress and Egress ACLS ACLs are one of the most powerful components used in controlling network resource utilization as well as in protecting the network. The X670- G2 series supports up to 4,096 ingress ACLs and 1,024 egress ACLs per system based on Layer 2-, 3- or 4-header information such as the MAC or IP source/destination address. ACLs are used for fil t er ing the tr affic , as well as classifying the tr affic flo w to control bandwidth, priority, mirroring, and policy-based routing/switching. Denial of Service Protection The X670-G2 series effectively handles Denial of Service (DoS) attacks. If the switch detects an unusually large number of packets in the CPU input queue, it assembles ACLs that automatically stop these packets from reaching the CPU. After a period of time these ACLs are removed, and reinstalled if the attack continues. ASIC-based LPM routing eliminates the need for control plane software to learn new flo w s, allowing more network resilience against DoS attacks. Secure and Comprehensive Network Management As the network becomes a foundation of the enterprise application, network management becomes an important piece of the solution. The X670-G2 supports comprehensive network management through Command Line Interface (CLI), SNMP v1, v2c, v3, and ExtremeXOS ScreenPlay embedded XML-based Web user interface. With a variety of management options and consistency across other Extreme Networks modular and stackable switches, X670-G2 series switches provide ease of management for demanding converged applications. www.extremenetworks.com 4

On the X670-G2 series switches MPLS can be enabled, if needed,by way of an optional feature pack. MPLS provides the ability to implement tr affic engineering and multi-service networks, and improve network resiliency. The MPLS protocol suite provides the ability to deploy services based on L2VPNS (VPLS/VPWS), BGP-based L3VPNS; LSP Establishment based on LDP, RSVP-TE, Static provisioning; Integrated OAM tools like VCCV, BFD and CFM; And MPLS Fast Reroute to support rapid local convergence around network failures. Supported Protocols and Standards A list of supported protocols and standards is available on the Extreme Networks website at: http://www.extremenetworks.com/go/xos www.extremenetworks.com 5

X670-G2-48x-4q – 1280Gbps switch bandwidth, 952Mpps forwarding rate X670-G2-72x – 1440Gbps switch bandwidth, 1071Mpps forwarding rate

9216 Byte maximum packet size (Jumbo Frame)

Store-and-Forward and Cut-Through switching support Less than 600 nanoseconds latency 128 load sharing trunks, up to 32 members per trunk 4096 VLANS (Port, Protocol, IEEE 802.1Q) 4096 ingress and 1024 egress ACL rules per switch Forwarding Tables Layer 2/MAC Addresses: 288K IPv4 Host Addresses: 136K IPv4 LPM Entries: 16K IPv6 Host Addresses: 48K IPv6 LPM Entries: 8K CPU, Memory 1GHz 64-bit CPU 2GB DDR3 ECC SDRAM 4GB eMMC Flash Memory QOS, Rate Limiting 4096 ingress bandwidth meters and 1024 egress meters Ingress and egress bandwidth policing/rate limiting per flo w / A CL

8 QoS egress queues/port

Egress bandwidth rate shaping per egress queue and per port Rate Limiting Granularity: 8Kbps – 1Mbps LED Indicator Per port status LED including power status System Status LEDs: management, fan and power External Ports – X670-G2-48x-4q 48 ports 10GBASE-X SFP+ (1Gb/10Gb dual speed) 4 ports 40GBASE-X QSFP+ (10G/40G dual speed) One RJ-45 RS-232c Serial port (control port) One 10/100/1000BASE-T out-of-band management port External Ports – X670-G2-72x 72 ports 10GBASE-X SFP+ (1Gb/10Gb dual speed) One RJ-45 RS-232c Serial port (control port) One 10/100/1000BASE-T out-of-band management port Power Supply Support 550W AC PSU – Front-Back and Back-Front air flo w options 550W DC PSU – Front-Back and Back-Front air flo w options Physical Spec ifications X670-G2-48x-4q Height: 1.73 Inches/4.4 cm Width: 17.4 Inches/44.1 cm Depth: 19.2 Inches/48.7 cm Weight: 12.85 lbs/5.83 kg X670-G2-72 Height: 1.73 Inches/4.4 cm Width: 17.4 Inches/44.1 cm Depth: 19.2 Inches/48.7 cm Weight: 15.42 lbs/7.0 kg X670 Fan Module Height: 1.65 Inches/4.2 cm Width: 1.65 Inches/4.2 cm Depth: 3.98 inches/10.1 cm Weight: 0.357 lbs./0.162 kg Operating Spec ifications Operating Temperature Range: 0°C to 45°C (32°F to 113°F) Operating Humidity: 10% to 95% relative humidity, non-condensing Operating Altitude: 0-3,000 meters (9,850 feet) Operational Shock (Half Sine): 30 m/s2 (3 g), 11ms, 60 Shocks Operational Random Vibration: 3Hz-500Hz @ 1.5g rms Storage and Transportation (Packaged) Transportation Temperature: -40°C to 70°C (-40°F to 158°F) Humidity: 10% to 95% RH, non-condensing Packaged Shock (Half Sine): 180 m/s2 (18 G), 6ms, 600 shocks Packaged Sine Vibration: 5Hz-62Hz @ Velocity 5mm/s, 62Hz-500Hz @ 0.2G Packaged Random Vibration: 5Hz-20 Hz @ 1.0 ASD w/-3dB/oct. from 20Hz-200Hz 14 drops min on sides & corners @ 42” (<15 kg box) Regulatory/Safety North American Safety of ITE UL 60950-1 2nd Ed, 2011-12-19, Listed Device (U.S.) CSA 22.2 #60950-1-07 2nd Ed, 2011-12. (Canada) Complies with FCC 21CFR 1040.10 (U.S. Laser Safety) CDRH Letter of Approval (U.S. FDA Approval) European Safety of ITE EN 60950-1:2006 2nd Ed. TUV-R GS www.extremenetworks.com 6

EN 60825-1:2007 (Lasers Safety) 2006/95/EC Low Voltage Directive International Safety of ITE CB Report & C er tificat e per IEC 60950-1:2005 2nd Ed., + National Differences AS/NZS 60950-1 (Australia/New Zealand) EMI/EMC Standards North America EMC for ITE FCC CFR 47 part 15 Class A (U.S.A.) ICES-003 Class A (Canada) European EMC Standards EN 55022:2010 Class A EN 55024:12020 Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11 EN 61000-3-2:2006+A2:2009 (Harmonics) EN 61000-3-3: 2008 (Flicker) ETSI EN 300 386 v1.6.1, 2012-09 (EMC Telecommunications) 2004/108/EC EMC Directive International EMC C er tifications CISPR 22: 2008, (Ed 6.0) Class A (International Emissions) CISPR 24:2010 Class A (International Immunity) IEC/EN 61000-4-2:2009 Electrostatic Discharge, 8kV Contact, 15kV Air, Criteria A IEC/EN 61000-4-3:2006+A1: 2008+A2:2010, Radiated Immunity, 80-2500MHz, 5-20V/m, Criteria A EN 55024:1998+A1:2001+A2:2003 Class A (International Immunity) IEC/EN 61000-4-4:2012 Transient Burst, 2kV, Criteria A IEC/EN 61000-4-5:2006 Surge, 2 kV L-L, 4 kV L-G, Level 3, Criteria A IEC/EN 61000-4-6:2009 Conducted Immunity, 0.15-80MHz, 10V/m unmod. RMS, Criteria A IEC/EN 61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods, Criteria C Country Spec ific VCCI:2003-04, Class A (Japan Emissions) ACMA (C-Tick) (Australia emissions) BSMI (Taiwan EMC) CCC Mark (China) KCC Mark EMC (Korea) Telecom Standards EN/ETSI 300 386:2008 (EMC Telecommunications) EN/ETSI 300 019 (Environmental for Telecommunications) IEEE 802.3 Media Access Standards IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3ae 10GBASE-X IEEE 802.3ba 40GBASE-X Environmental Standards EN/ETSI 300 019-2-1 v2.1.2 (2000-09) – Class 1.2 Storage EN/ETSI 300 019-2-2 v2.3.1 (2013-04) – Class 2.3 Transportation EN/ETSI 300 019-2-3 v2.3.1 (2013-04) – Class 3.1e Operational EN/ETSI 300 753 (1997-10) – Acoustic Noise ASTM D3580 Random Vibration Unpackaged 1.5G EU RoHS 2011/65/EU EU WEEE 2012/19/EU China RoHS SJ/T 11363-2006 Power Supply Spec ifications: 550W AC PSU Physical Spec ifications Height: 1.57 inches (4.0 cm) Width: 3.07 inches (7.8 cm) Depth: 13.31 Inches (33.8 cm) Weight 3.64 lb (1.65 kg) Power Spec ifications Voltage input range 90V to 264V Nominal input ratings 100V to 240V, 50Hz to 60Hz, 8A Nominal input current at full loads: 7.5A @ 90V (low-line) / 3.7A @ 230V (high-line) Line frequency range 47Hz to 63Hz Maximum inrush current 15A Output 12V, 45A max, 540W 3.3V, 3A max, 9.9W Maximum continuous DC output shall not exceed 550W Power supply input socket IEC 320 C14 Power cord input plug IEC 320 C13 Power supply cord gauge 18 AWG (0.75 mm2) up to 6 feet or 2 meters or 16 AWG (1.0 mm2) over 6 feet Effic ienc y 84% typical at full load, high line Power Supply Spec ifications: 550W DC PSU Physical Spec ifications Height: 1.57 inches (4.0 cm) Width: 3.07 inches (7.8 cm) Depth: 13.31 Inches (33.8 cm) Weight 2.58 lb (1.17 kg) Power Spec ifications Nominal Input -48 to -60VDC, 24A DC Voltage Input Range -35V to -75V Inrush Current 21A peak Minimum wire size 14 AWG (1.5 mm2) copper stranded DC Output 12V , 45A / 3.3V, 3A DC Output Power 550W www.extremenetworks.com 7

X670-G2-48x-4q X670-G2-72x Minimum Heat Dissipation 325 BTU/hr 325 BTU/hr Minimum Power Consumption 95W 95W Maximum Heat Dissipation 768 BTU/hr 939 BTU/hr Maximum Power Consumption 225W 275W Acoustics Switch Model Acoustic Information X670-G2-48x-4q Dual 550W AC PS with Front to Back (FB) air flo w Bystander Sound Pressure* 60.2 dB(A), 0°C to 45°C Declared Sound Power (LWAd)** 7.3 bels, 0°C to 45°C Dual 550W DC PS with Front to Back (FB) air flo w Bystander Sound Pressure* 61.3 dB(A), 0°C to 45°C Declared Sound Power (LWAd)** 7.4 bels, 0°C to 45°C Dual 550W AC PS with Back to Front (BF) air flo w Bystander Sound Pressure* 58.3 dB(A), 0°C to 35°C 70.1 dB(A), 45°C Declared Sound Power (LWAd)** 7.0 bels, 0°C to 35°C 8.4 bels, 45°C Dual 550W DC PS with Back to Front (BF) air flo w Bystander Sound Pressure* 55.0 dB(A), 0°C to 35°C 68.8 dB(A), 45°C Declared Sound Power (LWAd)** 6.5 bels, 0°C to 35°C 8.1 bels, 45°C X670-G2-72x Dual 550W AC PS with Front to Back (FB) air flo w Bystander Sound Pressure* 58.9 dB(A), 0°C to 35°C 62.5 dB(A), 45°C Declared Sound Power (LWAd)** 7.3 bels, 0°C to 35°C 7.6 bels, 45°C Dual 550W DC PS with Front to Back (FB) air flo w Bystander Sound Pressure* 58.5 dB(A), 0°C to 35°C 62.4 dB(A), 45°C Declared Sound Power (LWAd)** 7.3 bels, 0°C to 35°C 7.6 bels, 45°C Dual 550W AC PS with Back to Front (BF) air flo w Bystander Sound Pressure* 59.8 dB(A), 0°C to 35°C 72.6 dB(A), 45°C Declared Sound Power (LWAd)** 7.3 bels, 0°C to 35°C 8.2 bels, 45°C www.extremenetworks.com 8

Switch Model Acoustic Information Dual 550W DC PS with Back to Front (BF) air flo w Bystander Sound Pressure* 56.4 dB(A), 0°C to 35°C 73.0 dB(A), 45°C Declared Sound Power (LWAd)** 6.7 bels, 0°C to 35°C 8.3 bels, 45°C * Bystander Sound Pressure is presented only for comparison to other products. ** Declared Sound Power is presented in accordance with ISO-7779:2010(E), ISO 9296:2010 per ETSI/EN 300 753:2012-01. Supported System C onfigur ations Fan modules and power supplies must be ordered with all base models. A full complement of fan modules is required. A single power supply is required with an optional second power supply for redundancy. AC and DC power supplies can be mixed in a system. Air flo w direction of fan modules and power supplies must match. X670-G2-48x-4q Base-Unit (part no. 17310) Base unit plus:

• Three X670 fan modules Front-Back (17111) OR three X670 fan modules Back-Front (17112)
• One of the following: ◦ One or two 550W AC power supplies Front-Back (10925) ◦ One or two 550W AC power supplies Back-Front (10927) ◦ One or two 550W DC power supplies Front-Back (10926) ◦ One or two 550W DC power supplies Back-Front (10928) X670-G2-72x Base-Unit (part no. 17300) Base unit plus:
• Five X670 fan modules Front-Back (17111) OR fiv e X670 fan modules Back-Front (17112)
• One of the following: ◦ One or two 550W AC power supplies Front-Back (10925) ◦ One or two 550W AC power supplies Back-Front (10927) ◦ One or two 550W DC power supplies Front-Back (10926) ◦ One or two 550W DC power supplies Back-Front (10928) www.extremenetworks.com 9

Ordering Information

Part Number Product Name Product Description 17300 X670-G2-72x Base-Unit 72 10GBASE-X SFP+, ExtremeXOS Advanced Edge License, unpopulated dual PSU power slot and 5 unpopulated fan air flo w slots

17310 X670-G2-48x-4q Base-Unit 48 10GBASE-X SFP+ and 4 40GBASE-X QSFP+, ExtremeXOS Advanced Edge License,

unpopulated dual PSU power slot , and 3 unpopulated fan air flo w slots 17310T X670-G2-48x-4q-FB-AC-TAA TAAX670-G2-48x-4q 48 10GBASE-X SFP+ and 4 40GBASE-X QSFP+ ExtremeXOS Advanced Edge License, 2 550W AC Power Supplies with Front-to-Back air flo w , and 3 Front-to-Back air flo w fan modules

17111 X670 fan module FB Fan module for X670 series switches, Front-to-Back air flo w

17112 X670 fan module BF Fan module for X670 series switches, Back-to-Front air flo w

10925 550WAC PSU FB 550W AC Power Supply module for switches, Front-to-Back air flo w 10926 550W DC PSU FB 550W DC Power Supply module for switches, Front-to-Back air flo w 10927 550W AC PSU BF 550W AC Power Supply module for switches, Back-to-Front air flo w 10928 550W DC PSU BF 550W DC Power Supply module for switches, Back-to-Front air flo w 10965 LRM/MACsec Adapter LRM/MACsec Adapter, includes two host cables for host switch connection, and USB cable for optional power connection. Requires MACsec license on host switch. 10966 5-Unit Rack Mount Kit Optional rack mount bracket for LRM/MACsec Adapter. Holds fiv e units in 1RU

17131 X670 Series Core License X670 Series Core License

17133 X670 MPLS Feature Pack X670 MPLS Feature Pack

17134 X670 OpenFlow FeaturePack ExtremeXOS SDN - OpenFlow Feature Pack for X670 series switches

17135 X670 AVB ExtremeXOS Audio Video Bridging Feature Pack for X670 series switches

17136 X670-G2Timing 1588 PTP* ExtremeXOS Network Timing Feature Pack for X670-G2 - enables 1588v2 PTP* (Precision Time Protocol)

11011 Direct Attach Feature Pack Direct Attach Feature Pack

17137 X670-G2 MACsec Feature Pack MACsec Feature Pack for X670-G2 series switches. Enables MACsec when used with LRM/ MACsec Adapter (10965)

10319 QSFP+SR4 module 40 Gigabit Ethernet QSFP+ SR4 optical module, MPO connector, 100m MMF link length

9380014-5M MPO to 4x LC OM3 MMF MP Oto 4xLC OM3 MMF patch cord, 5m (for use with 10319 QSFP+ SR 10Gb breakout) 10329 40Gb Bidi MMF QSFP+ 40Gb Bidirectional MMF, 100m OM3, QSFP+, duplex LC

10320 QSFP+LR4 module 40 Gigabit Ethernet QSFP+ LR4 optical module, LC connectors, 10km SMF link length

10326 QSFP+PSM Optical Module 40 Gigabit QSFP+ Parallel Single Mode (PSM) LR4, MPO connector, SMF 10 km

10327 MPO to 4x LC SMF MPO to 4x LC SMF patch cord, 10m (for use with 10326 QSFP + PSM LR4)

10334 40Gb LM4 QSFP+ 40Gb LM4, 140m OM3 MMF, 1Km SMF, QSFP+, LC 10335 40Gb ER4 QSFP+ 40Gb ER4, 40Km SMF, QSFP+, LC 10311 QSFP+passive copper cable, 0.5M 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 0.5m length. 10312 QSFP+passive copper cable, 1.0M 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 1m length. www.extremenetworks.com 10

Part Number Product Name Product Description 103131 QSFP+passive copper cable, 3.0M 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 3m length. 103231 QSFP+passive copper cable, 5.0M 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 5m length. 10336 3m QSFP+ Active Optical Cable 40 Gigabit QSFP+ active optical cable, 3m 10337 5m QSFP+ Active Optical Cable 40 Gigabit QSFP+ active optical cable, 5m 10315 10m QSFP+ Active Optical Cable 40 Gigabit Ethernet QSFP+ active optical cable assembly, 10m length. 10316 20m QSFP+ Active Optical Cable 40 Gigabit Ethernet QSFP+ active optical cable assembly, 20m length. 10318 100m QSFP+ Active Optical Cable 40 Gigabit Ethernet QSFP+ active optical cable assembly, 100m length.

10202 QSFP+- 4xSFP+ fan-out cable, 1m QSFP+to 4 x SFP+ fan-out copper cable, 1m

10203 QSFP+- 4xSFP+ fan-out cable, 2m QSFP+to 4 x SFP+ fan-out copper cable, 2m

10321 QSFP+- 4xSFP+ fan-out cable, 3m QSFP+to 4 x SFP+ fan-out copper cable, 3m

QSFP+to SFP+ Adapter QSFP+to SFP+ adapter, supports a single SFP+ 10 Gb Ethernet transceiver in a QSFP+ port (optical SFP+ transceivers only, 10303 LRM not supported)

10301 SR SFP+ module 10GBASE-SRSFP+, 850nm, LC Connector, transmission length of up to 300m on MMF

10302 LRSFP+ module 10GBASE-LRSFP+, 1310nm, LC Connector, transmission length of up to 10km on SMF

10309 ERSFP+ module 10GBASE-ERSFP+, 1550nm, LC Connector, transmission length of up to 40km on SMF

10310 ZR SFP+ module 10GBASE-ZRSFP+, 1550nm, LC connector, transmission length up to 80km on SMF

10325 Tunable DWDM SFP+ 10Gigabit Ethernet SFP+ Tunable DWDM module, SMF 80km, LC

10GB-BX10-D 10 GB, SINGLE FIBER SM, -D 10 KM 10Gb, Single Fiber SM, Bidirectional, Downstream, 10Km, Simplex LC SFP+ (must be paired with 10GB-BX10-U) 10GB-BX10-U 10 GB, SINGLE FIBER SM, -U 10 KM 10Gb, Single Fiber SM, Bidirectional, Upstream, 10Km, Simplex LC SFP+ (must be paired with 10GB-BX10-D)

10304 SFP+Cable Assembly 1M 10GBASE-CRSFP+ pre-terminated twin-ax copper cable with link lengths of 1m

10305 SFP+Cable Assembly 3M 10GBASE-CRSFP+ pre-terminated twin-ax copper cable with link lengths of 3m

103061 SFP+Cable Assembly 5M 10GBASE-CRSFP+ pre-terminated twin-ax copper cable with link lengths of 5m

10051H 1000BASE-SXSFP, Hi 1000BASE-SXSFP, MMF 220 & 550 meters, LC connector, Industrial Temp 10052H 1000BASE-LXSFP, Hi 1000BASE-LXSFP, MMF 220 & 550 meters, SMF 10km, LC connector, Industrial Temp 10053H 1000BASE-ZXSFP, Hi 1000BASE-ZXSFP, SMF 70km, LC connector, Industrial Temp 10070H2 10/100/1000BASE-T SFP, Hi 10/100/1000BASE-TSFP module, CAT5 cable 100m link, RJ45-connector for Giga Bit Ethernet SFP Port, Industrial Temp * 1588 PTP supported only in EXOS Release 30.6 and earlier

1 Not supported for SummitStack links

2 Only 1Gb speed supported with 10070H when used with X670-G2

Note: See the ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices document for a full list of supported devices and ExtremeXOS release recommendations. www.extremenetworks.com 11

In support of the Extreme Networks Green initiatives, powercords can be ordered separately, but need to be spec ified at time of ordering. Warranty One-year hardware warranty. For warranty details, visit https:// www.extremenetworks.com/support/policies/. Maintenance Services Extreme's maintenance and support services with 100% in-sourced engineering experts and over 90% fir st -per son resolution ensure effic ient operation of your business- essential network. 24x7x365 phone support, advanced parts replacement, and on-site support augment your staff with experienced resources that help you mitigate critical network issues fast. Visit Extreme Maintenance Services for more information. ©2023 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks please see http://www.extremenetworks.com/company/legal/trademarks. Spec ifications and product availability are subject to change without notice. 13oct23 www.extremenetworks.com 12