1020

1020 ADAFRUIT | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

FOOD-GRADE HEAT SHRINK - 3/8" DIAMETER 12" LONG PRODUCT ID: 1020 We decided to stock this food-safe heat shrink specifically for people who were building beer-brewing or sous-vide proj ects using our waterproof DS18B20+ digital temperature sensors. This heat shrink is FDA Compliant for contact with food. The end of the sensor is stainless steel, but the jacketing is PVC, not good for dunking into your food or drink! But this heat shrink makes it easy - simply slip it on, allowing about 1 cm of the stainless steel sensor cap to be exposed, then heat it up to seal it on. The heat shrink will make a seal over the cap, so that no PVC touches your food project.

This product is just 12" long piece of heat shrink, it does not include the waterproof DS18B20+ digital temperatur e sensors so be sure to pick up one of those too. TECHNICAL DETAILS  Clear, food-grade heat shrink  Acrylated olefin tubing  Shrink Ratio: 2 to 1  3/8" diameter before shrinking, 3/16" after  12" long piece, can be cut down as much as you'd like  Shrink Temperature: 250°F (120 °C)  Usage Temperature Range: -67° to +250° F / -55°C to +120 °C https://www.adafruit.com/product/1020 7‐13‐18