M20S-02150A220 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
M20S-02150A220, M20S-02150A221 M2000 Cascadable MULTIPLE LIGHT BEAM SAFETY DEVICES
A B C D E F H I J K L M N O P Q R S T M20S-02150A220, M20S-02150A221 | M2000 Cascadable MULTIPLE LIGHT BEAM SAFETY DEVICES
Ordering information
System part Type Part no. Sender M20S-02150A220 1018031 Receiver M20S-02150A221 1018032 1.) Concerns installation as a replacement part for previous type 2 device in machine: Regarding Machinery Directive 2006/42/EC, Article 1, Paragraph (2a) this type 2 device may only be used as a replacement part for identical PL d / SIL2 devices within the EU if the machine was put into circulation before 2015-05-10. Keep this note with your machine documen- tation. If the machine is sold on, this note and the information it contains must be passed on to every subsequent buyer. 2.) Concerns installation on new machines: Due to the amendment to the EN/IEC 61496-1 standard, this type 2 device may only be installed on new machines up to PL c / SIL1 as of 2015-05-10. Other models and accessories www.sick.com/M2000_Cascadable Detailed technical data Safety-related parameters Type Type 2 (IEC 61496) Safety integrity level SIL1 (IEC 61508) SILCL1 (EN 62061) Category Category 2 (EN ISO 13849) Test rate (internal test) 13 /s (EN ISO 13849) 1) Maximum demand rate ≤ 8 min⁻¹ (EN ISO 13849) 2) Performance level PL c (EN ISO 13849) PFHD (mean probability of a dangerous fail- ure per hour) 6.6 x 10-9 (EN ISO 13849) TM (mission time) 20 years (EN ISO 13849) Safe state in the event of a fault At least one OSSD is in the OFF state. 1) Internal test. The test rate may not be exceeded if an external test is performed. 2) Between two requirements on a safety-related response of the device, at least 100 internal or external tests must be carried out. Functions Beam coding ✔ Configurable scanning range ✔ Interfaces System connection Connection type Hirschmann male connector M26, 12-pin / Hirschmann plug M26, 7-pin (depending on type) Conductor cross-section 1 mm² Configuration method Hard wired Display elements LEDs 7-segment display Fieldbus, industrial network Integration via Flexi Soft safety controller CANopen, DeviceNet™, EtherCAT®, EtherNet/IP™, Modbus TCP, PROFIBUS DP, PROFINET 1) 1) For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.
2 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2017-06-14 08:06:28
Subject to change without notice
M20S-02150A220, M20S-02150A221 | M2000 Cascadable MULTIPLE LIGHT BEAM SAFETY DEVICES Electrical data Protection class III (EN 50178) Safety outputs (OSSD) Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 1) The external voltage supply must be capable of buffering brief mains voltage failures of 20 ms as specified in EN 60204-1. Suitable power supplies are available as accessories from SICK. Mechanical data Housing cross-section 48 mm x 40 mm Ambient data Enclosure rating IP65 (EN 60529) Air humidity 15 % ... 95 %, Non-condensing Vibration resistance 5 g, 10 Hz ... 55 Hz (IEC 60068-2-6) Shock resistance 10 g, 16 ms (IEC 60068-2-29) Other information Wave length 950 nm Dimensional drawing (Dimensions in mm (inch)) L 1 A 1 S 1 1. 7 8.4 3.5 10. 5 2.2 44.4 42.9 756848 L 6L 2L 3L 4 15. 4 11. 9 22.4 25.6 14. 4 76. 3 3522.5 42.6 L 5 42.3 ➀ ➁ ➃ ➄ Number of beams Beam sep- aration Resolution L1 L2 L3 L4 L5 L6 2 500 - 630 588 697 718 694 686 3 400 - 931 888 998 1019 995 987 4 300 - 1031 989 1098 1119 1095 1087 8 - 116 851 809 919 939 915 907 6 - 170 916 874 983 1004 979 971 7 - 170 1073 1031 1140 1161 1137 1129 8 - 170 1231 1189 1298 1319 1294 1286 9 - 170 1388 1346 1455 1476 1452 1444 Dimensions in mm (inch) 2017-06-14 08:06:28 | Online data sheet Subject to change without notice OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 3
A B C D E F H I J K L M N O P Q R S T M20S-02150A220, M20S-02150A221 | M2000 Cascadable MULTIPLE LIGHT BEAM SAFETY DEVICES Recommended accessories Other models and accessories www.sick.com/M2000_Cascadable Brief description Type Part no. Mounting brackets and plates 4 pieces, Mounting kit 1, mounting bracket, rigid, L-shaped, including fixing screws and washers BEF-3WNGBAST4 7021352 Terminal and alignment brackets 4 pieces, Mounting kit 6, side bracket, rotatable, Zinc diecast BEF-1SHABAZN4 2019506 4 pieces, Omega bracket, rotatable, fixable with only one screw, for mounting on the swivel mount BEF-2SMMEAAL4 2044847 4 pieces, Mounting kit 2, rotatable, swivel mount, Polyamide PA6 BEF-2SMMEAKU4 2019659 Alignment aids Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look into the beam! AR60 1015741 Adapter AR60 for housing cross-section 48 mm x 40 mm AR60 adapter, 48x40 4032461 Adapter AR60 for housing cross-section 48 mm x 40 mm in PU3H device column AR60 adapter, 48x40, PU3H 4056731
4 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2017-06-14 08:06:28
Subject to change without notice
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com