KT5W-2P1123 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
A B C D E F H I J K L M N O P Q R S T KT5W-2P1123 | KT5 CONTRAST SENSORS
Ordering information
Type Part no. KT5W-2P1123 1017810 Other models and accessories www.sick.com/KT5 Detailed technical data
Features
Dimensions (W x H x D) 30.4 mm x 53 mm x 80 mm Sensing distance 10 mm 1) Sensing distance tolerance ± 3 mm Housing design (light emission) Rectangular Light source LED, RGB 2) Wave length 470 nm, 525 nm, 640 nm Light emission Long and short side of housing, exchangeable Light spot size 1.2 mm x 4.2 mm Light spot direction Vertical 3) Adjustment Teach-in button Teach-in mode Teach-in dynamic 1) From front edge of lens. 2) Average service life: 100,000 h at TU = +25 °C. 3) In relation to long side of housing. Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 5 Vpp 2) Power consumption < 80 mA 3) Switching frequency 10 kHz 4) 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) Short-circuit protected. 7) Reference voltage DC 50 V.
2 REGISTRATION SENSORS | SICK Online data sheet | 2017-12-19 15:43:33
Subject to change without notice
KT5W-2P1123 | KT5 CONTRAST SENSORS Response time 50 µs 5) Switching output PNP Switching output (voltage) PNP: HIGH = VS– ≤ 2 V / LOW approx. 0 V Output current Imax. 100 mA 6) Input, teach-in (ET) PNP Teach: U = 10 V ... < UV Run: U < 2 V Input, light/dark (L/D) PNP Light: U = 0 V Dark: U > 10 V ... < UV Retention time (ET) 25 ms, non-volatile memory Time delay 20 ms Connection type Male connector M12, 5-pin Protection class II 7) Circuit protection UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression Enclosure rating IP67 Weight 400 g Housing material Zinc diecast 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) Short-circuit protected. 7) Reference voltage DC 50 V. Ambient data Ambient operating temperature –10 °C ... +55 °C Ambient storage temperature –25 °C ... +75 °C Shock load According to IEC 60068 Classifications ECl@ss 5.0 27270906 ECl@ss 5.1.4 27270906 ECl@ss 6.0 27270906 ECl@ss 6.2 27270906 ECl@ss 7.0 27270906 ECl@ss 8.0 27270906 ECl@ss 8.1 27270906 ECl@ss 9.0 27270906 ETIM 5.0 EC001820 ETIM 6.0 EC001820 UNSPSC 16.0901 39121528 2017-12-19 15:43:33 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T KT5W-2P1123 | KT5 CONTRAST SENSORS Dimensional drawing (Dimensions in mm (inch)) KT5-2 Teach-in, KT5-2 Display 3.5 (0.14) Ø 25.5 (1.00) Sensing distance 10 mm (0.39 inch) 4.5 (0.18) Ø 25.6 (1.00) Sensing distance 20 mm (0.79 inch) Sensing distance 40 mm (1.57 inch) Ø 26 (1.02) 17.4 (0.69) 9 (0.35) 28 (1.10) 56 (2.20) (0.83) 30.4 (1.20) (0.67) (0.51) 28 (1.10) 52 (2.05) 80 (3.15) 25 (0.98) 40 (1.57) 53 (2.09) (0.12) 2 1 ① Lens (light transmission), can be exchanged for pos. 4 ② M5 threaded mounting hole, 5.5 mm deep ③ See dimensional drawings of lenses ④ Blind screw can be replaced by pos. 1 ⑤ Connector M12 (rotatable up to 90°) Adjustments KT5-2 Teach-in, KT5W-xxx3 1 2 T E A C H D L RUN RUN Q T E A C H ① Function signal indicator (yellow) ② Pre-selection switch ③ Teach-in button
4 REGISTRATION SENSORS | SICK Online data sheet | 2017-12-19 15:43:33
Subject to change without notice
KT5W-2P1123 | KT5 CONTRAST SENSORS Connection diagram Cd-324 +(L+) Q -(M) T each L/D BN BK WH 3BU 5GY Concept of operation KT5-2 Teach-in, teach-in dynamic Switching characteristics The optimum emitted light is selected automatically. The switching threshold is set in the center between the lowest and the second-lowest reflectivity. Teach-in can also be performed using an external control signal. Light/dark setting can also be configured using an external control signal. Observe the minimum speed (25 mm/s ... 300 mm/s). Press the teach-in button and keep it pressed. 2. Position mark or background 1. Select switching function (light/dark) Turn rotary switch to desired teach position: D = dark switching L = light switching Keep the teach-in button pressed. 3. Move at least one repeat length using the light spot Release the teach-in button. Yellow LED will illuminate, when emitted light is on the mark. Example Internal signal received Dark switching Output Q Switching threshold Internal signal received Light switching Print image in detection track Output Q Switching threshold D L RUN RUN T E A C H D L RUN RUN T E A C H D L RUN RUN T E A C H D L RUN RUN T E A C H 2017-12-19 15:43:33 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T KT5W-2P1123 | KT5 CONTRAST SENSORS Characteristic curve KT5-2 Teach-in, KT5G, KT5W, KT5-2 Display Relative sensitivity in % (0.39) 0 20 (0.79) (1.18) (1.57) (1.97) 100 Sensing distance in mm (inch) ① Sensing distance 10 mm ② Sensing distance 20 mm ③ Sensing distance 40 mm Recommended accessories Other models and accessories www.sick.com/KT5 Brief description Type Part no. Universal bar clamp systems Plate G for universal clamp bracket, steel, zinc coated, universal clamp and mounting hardware included BEF-KHS-G01 2022464 Plate K for universal clamp bracket, steel, zinc coated, universal clamp and mounting hardware included BEF-KHS-K01 2022718 Universal clamp bracket for rod mounting, steel, zinc coated, without mounting hard- ware BEF-KHS-KH1 2022726 Mounting bar, straight, 200 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-A 4056054 Mounting bar, straight, 300 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-B 4056055 Mounting bar, L-shaped, 150 mm x 150 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-A 4056052 Mounting bar, L-shaped, 250 x 250 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-B 4056053
6 REGISTRATION SENSORS | SICK Online data sheet | 2017-12-19 15:43:33
Subject to change without notice
KT5W-2P1123 | KT5 CONTRAST SENSORS Brief description Type Part no. Plug connectors and cables Head A: female connector, M12, 5-pin, straight Head B: open cable ends Cable: PVC, unshielded, 2 m DOL-1205-G02M 6008899 Head A: female connector, M12, 5-pin, straight Head B: open cable ends Cable: PVC, unshielded, 5 m DOL-1205-G05M 6009868 Head A: female connector, M12, 5-pin, straight Head B: open cable ends Cable: PVC, unshielded, 10 m DOL-1205-G10M 6010544 Head A: female connector, M12, 5-pin, angled Head B: open cable ends Cable: PVC, unshielded, 2 m DOL-1205-W02M 6008900 Head A: female connector, M12, 5-pin, angled Head B: open cable ends Cable: PVC, unshielded, 5 m DOL-1205-W05M 6009869 Head A: female connector, M12, 5-pin, angled Head B: open cable ends Cable: PVC, unshielded, 10 m DOL-1205-W10M 6010542 Head A: female connector, M12, 5-pin, straight Cable: unshielded DOS-1205-G 6009719 Head A: female connector, M12, 5-pin, angled Head B: - Cable: unshielded DOS-1205-W 6009720 Lenses and accessories Lens, 40 mm sensing distance, M20 x 0.75 OBJ-210 2010945 Lens, 10 mm sensing distance, M20 x 0.75 OBJ-211 1004936 Lens, 20 mm sensing distance, M20 x 0.75 OBJ-212 1011506 2017-12-19 15:43:33 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 7
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com