1720M 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Cushion-Mount™ Plus Plate Mounting Tapes 1720M, 1015M, 1020M, 1015, 1020, 1020R 1920M, 1115, 1120 Technical Data June 2017 Product Description 3M™ Cushion-Mount™ Plus Plate Mounting Tapes are designed for mounting flexographic print plates to cylinders or sleeves. This family of foam mounting tapes provides excellent print quality for process, combination, and solid printing. Features • Offers a complete range of foam densities providing excellent print quality from process to combination to solid printing.
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimize print quality.
- The adhesive on the linered side (plate side) of the tape is designed for mounting of photopolymer plates, excellent holding power on-press and clean plate removal when demounting.
- The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.
3M™ Cushion-Mount™ Plus Plate Mounting Tapes 1720M • 1015M • 1020M • 1015 • 1020 • 1020R • 1920M • 1115 • 1120 Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Product 3M™ Cushion-Mount™ Plus Medium Firm Combination Plate Mounting Tape 3M™ Cushion-Mount™ Plus Standard Combination Plate Mounting Tapes 3M™ Cushion-Mount™ Plus Standard Combination Plate Mounting Tapes 1720M 1015M 1020M 1015 1020 Adhesive Differential Acrylate Differential Acrylate Differential Acrylate Polyethylene Carrier Medium Firm Teal Foam Standard White Foam Standard White Foam Type of Printing Combination of solid and line with tone reproduction and fine reverses Combination of solid and line with tone reproduction and fine reverses Combination of solids and tone reproduction where solids and process are equally important Application Thickness in (mm) 0.020 (0.508) 0.015 (0.381) 0.020 (0.508) 0.015 (0.381) 0.020 (0.508) Thickness Tape in (mm) Paper Liner in (mm) Lot to Lot Tolerance in (mm) Typical Application Area in Caliper Variation (mm) 0.022 (0.559) 0.017 (0.432) 0.022 (0.559) 0.017 (0.432) 0.022 (0.559) 0.0045 (0.114) 0.0045 (0.114) 0.0045 (0.114) 0.0045 (0.114) 0.0045 (0.114) ±0.0015 (±0.038) ±0.0015 (±0.038) ±0.0015 (±0.038) ±0.0015 (±0.038) ±0.0015 (±0.038) ±0.0004 (±0.010) ±0.0004 (±0.010) ±0.0004 (±0.010) ±0.0004 (±0.010) ±0.0004 (±0.010) Roll Length yd (m) (22.9) (22.9) (22.9) (22.9) (22.9) Maximum Width in (mm) (1371.6) (1371.6) (1371.6) (1371.6) (1371.6) Minimum Width in (mm) (50.8) (50.8) (50.8) (50.8) (50.8) Slitting Tolerance in (mm) ±1/32 (±0.794) ±1/32 (±0.794) ±1/32 (±0.794) ±1/32 (±0.794) ±1/32 (±0.794) Density lb/ft3 (kg/m3) (480) (450) (450) (450) (450) Compression Deflection 10% Compression lb/in2 (kPa) 25% Compression lb/in2 (kPa) (207) (103) (103) (103) (103) (345) (207) (207) (207) (207) Durometer ASTM-D2240 Shore A 68 65 65 65 65 Peel Adhesion (Modified ASTM-D3330) Non-linered side - oz/in Stainless Steel (N/100mm) Non-linered side - oz/in Composite Sleeve (N/100mm) Non-linered side - oz/in Polyester (N/100mm) Non-linered side - oz/in Urethane - A (N/100mm) Non-linered side - oz/in Urethane - B (N/100mm) (60) (60) (60) (60) (60) (71) (71) (71) (71) (71) (66) (66) (66) (66) (66) (77) (77) (77) (77) (77) (66) (60) (60) (60) (60) Peel Adhesion (Modified ASTM-D3330) Linered side - oz/in Photopolymer (N/100mm) Linered side - oz/in Rubber (N/100mm) (71) (71) (71) (87) (87) NA NA NA NA NA Solvent Resistance Water Alkanes Alcohols Acetates Excellent Excellent Good Fair Excellent Excellent Good Fair Excellent Excellent Good Fair Excellent Excellent Good Fair Excellent Excellent Good Fair Heat Resistance °F (°C) 120 (49) 120 (49) 120 (49) 120 (49) 120 (49)
3M™ Cushion-Mount™ Plus Plate Mounting Tapes 1720M • 1015M • 1020M • 1015 • 1020 • 1020R • 1920M • 1115 • 1120 Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Product 3M™ Cushion-Mount™ Plus Standard Combination Plate Mounting Tape 3M™ Cushion-Mount™ Plus Medium Soft Process Plate Mounting Tape 3M™ Cushion-Mount™ Plus Soft Process Plate Mounting Tape 1020R 1920M 1115 1120 Adhesive Differential Acrylate Differential Acrylate Differential Acrylate Polyethylene Carrier Standard White Foam Medium Soft Pink Foam Soft Tan Foam Type of Printing Combination of solids and tone reproduction where solids and process are equally important Combination of solids and tone reproduction where process printing is important Tone reproduction where process printing is important Application Thickness in (mm) 0.020 (0.508) 0.020 (0.508) 0.015 (0.381) 0.020 (0.508) Thickness Tape in (mm) Paper Liner in (mm) Lot to Lot Tolerance in (mm) Typical Application Area in Caliper Variation (mm) 0.022 (0.559) 0.022 (0.559) 0.017 (0.432) 0.022 (0.559) 0.0045 (0.114) 0.0045 (0.114) 0.0045 (0.114) 0.0045 (0.114) ±0.0015 (±0.038) ±0.0015 (±0.038) ±0.0015 (±0.038) ±0.0015 (±0.038) ±0.0004 (±0.010) ±0.0004 (±0.010) ±0.0004 (±0.010) ±0.0004 (±0.010) Roll Length yd (m) (22.9) (22.9) (22.9) (22.9) Maximum Width in (mm) (1371.6) (1371.6) (1371.6) (1371.6) Minimum Width in (mm) (50.8) (50.8) (50.8) (50.8) Slitting Tolerance in (mm) ±1/32 (±0.794) ±1/32 (±0.794) ±1/32 (±0.794) ±1/32 (±0.794) Density lb/ft3 (kg/m3) (450) (416) (384) (384) Compression Deflection 10% Compression lb/in2 (kPa) 25% Compression lb/in2 (kPa) (103) (70) (35) (35) (207) (138) (70) (70) Durometer ASTM-D2240 Shore A 65 60 55 55 Peel Adhesion (Modified ASTM-D3330) Non-linered side - oz/in Stainless Steel (N/100mm) Non-linered side - oz/in Composite Sleeve (N/100mm) Non-linered side - oz/in Polyester (N/100mm Non-linered side - oz/in Urethane - A (N/100mm) Non-linered side - oz/in Urethane - B (N/100mm) (60) (33) (46) (46) (71) (31) (77) (77) (66) (39) (39) (39) (77) (39) (39) (39) (60) (33) (27) (27) Peel Adhesion (Modified ASTM-D3330) Linered side - oz/in Photopolymer (N/100mm) Linered side - oz/in Rubber (N/100mm) (74) (71) (71) (71) (33) NA NA NA Solvent Resistance Water Alkanes Alcohols Acetates Excellent Excellent Good Fair Excellent Excellent Good Fair Excellent Excellent Good Fair Excellent Excellent Good Fair Heat Resistance °F (°C) 120 (49) 120 (49) 120 (49) 120 (49)
3M™ Cushion-Mount™ Plus Plate Mounting Tapes 1720M • 1015M • 1020M • 1015 • 1020 • 1020R • 1920M • 1115 • 1120 Storage Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% relative humidity in the original carton. Shelf Life To obtain best performance, use all products, except 3M™ Cushion-Mount™ Plus Plate Mounting Tapes 1040 and 1060, within two years from date of manufacture. For 3M™ Cushion-Mount™ Plus Plate Mounting Tapes 1040 and 1060 use within one year from date of manufacture. Technical Information The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Product Selection and Use Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy and Disclaimer Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability. ISO 9001 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/print 3M and Cushion-Mount are trademarks of 3M Company. ©3M 2017 E 70-0709-4458-5 (6/17)