DTM06-2S TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 16
Technical content
DT Series Technical Manual INDUSTRIAL DT Series Manual #50907.indd 1 7/31/2008 5:14:33 PM
Features & Benefits Product Line Overview Material Specifications General Specifications
Ordering Information
Contacts & Application Data 2, 3 7, 8 DT Series Technical Manual Contact Retention System Assembly Contact Insertion / Removal Accessories Shrink Boot Adaptor Removal Tools / Sealing Plugs DT Mounting Clips Back Shells 14, 15 Deutsch DTM Series Deutsch DTM Series of transportation connectors feature a miniature contact with an enhanced design based on the world class, field-proven Deutsch DT Series. The DTM is the connector to be used in harsh environmental application where reliable signal circuits are critical to operating performance. Typical applications include on or around the engine, the transmission and under the hood. Environmentally-Sealed Transportation Connectors Deutsch DT Series An environmentally-sealed connector designed specifically for cable to cable applications on the engine or transmission, under the hood, on the chassis or in the cab. On signal level circuits in harsh environmental conditions, where even a small degradation in connection may be critical, the Deutsch DT Series general purpose connectors will provide the reliability and performance at the lowest cost. A STEP AHEAD DT Series Manual #50907.indd 2 7/31/2008 5:14:33 PM
DT Series Technical Manual Deutsch DTHD Series Deutsch developed the DTHD Series for those applications requiring a complete, environmentally sealed, single power circuit termination. The plug features an integral coupling latch that provides tactile and audible feedback during coupling. The rugged thermoplastic receptacle is designed as an inline for cable to cable applications and is supplied with an integral Vee-Groove to accept mounting, clips, brackets and flanges. Deutsch DT Bussed Series Integral Connector Latch Rugged Thermoplastic Housing -55 o C to +125o C Operating Temperature Available Configurations: DTM/DT 2, 3, 4, 6, 8 & 12 - Size 20/16 DTP 2 & 4 - Size 12 DTHD 1 - Size 4, 8 & 12 Silicone Seals: DTM: Accepts AWG 22 - 16 wire DT: Accepts AWG 20 - 14 wire DTP: Accepts AWG 14 - 10 wire DTHD: Accepts AWG 14 - 6 wire Crimp Contacts with Option of Gold or Nickel Finish, Solid or Stamped Construction Current rating all contacts @ 125
0 C no derating
DTM - 7.5 Amps DT - 13 Amps DTP - 25 Amps DTHD - 25 to 100 Amps Fail-Safe Secondary Locks All (Except DTHD) Hand Insertable/Removable Contacts Budget Minded Tactile and Audible Assembly Feedback Field Proven Long Service Life Engine Compartment Rated Meets Most Harness Design Requirements Superior Environmental Seal Low Costs, High Reliability Terminals for Data & Signal Transmission Meets Most Signal Requirements Positive Contact Retention No Special Tools Required (Except DTHD) Low Installation Costs Features Benefits Deutsch DTP Series Deutsch’s DTP Series connectors are the answer to all of your most demanding power application requirements. DTP Series connectors offer the proven reliability and quality of Deutsch’s DT Series, combined with the added flexibilty of using power contacts. Utilizing the Deutsch DT receptacle shell, Deutsch has combined the rugged characteristics of the DT product line with a bussing device allowing the elimination of various harness splices. By using internal stamped bussed contacts this product can be configured in whatever arrangement meets your individual needs in the DT shell size that matches your requirements. Complete bussing flexibility in a compact, economical package. A STEP AHEAD DT Series Manual #50907.indd 3 7/31/2008 5:14:34 PM
DT Series Technical Manual Product Line Overview Deutsch DTM Series of transportation connectors feature a miniature contact with an enhanced design based on the world class, field-proven Deutsch “DT Series”. The DTM is the connector to be used in harsh environmental applications where reliable signal circuits are critical to operating performance. Typical applications include on or around the engine, the transmission and under the hood. In fact, everywhere data signals or critical electronic circuits go, the field proven Deutsch design of the DTM will provide reliable peak connector performance. The low cost, size 20 contacts terminate AWG 16 to 22 gauge wire (0.5mm 2 to 1.5mm2). Closed entry socket (female) contacts featuring spring action fingers are protected by a stainless steel hood. This allows for positive axial alignment while mating and prevents probe damage during testing. Thermoplastic housings offer a wide operating temperature range (-550 C to +125 0 C). Silicone rear wire and internal peripheral interface seals allow the DTM to withstand moisture and fluids. Deutsch DT Series of environmentally-sealed, connectors are designed specifically for cable to cable applications on the engine or transmission, under the hood, on the chassis or in the cab. Where signal level circuits in harsh environmental conditions, where even a small degradation in connection may be critical, the Deutsch DT Series general purpose connectors will provide the reliability and performance at the lowest cost. Thermoplastic (-55
0 C to + 1250 C rated) housings and silicone
seals are used to allow the connector to withstand conditions of extreme temperature and moisture. The connector may be employed with either solid-copper crimp type contacts for critical circuits or budget-minded stamped and formed contacts. In either selection, the spring action is designed in the socket and shrouded by a stainless steel hood that provides closed entry for positive axial alignment during mating, and eliminates probe damage from occurring. Contact insertion and withdrawal require no special tools and are retained in locked position by dielectic fingers, molded as an integral part of the housing. Secondary locks are assembled at the mating interfaces. If by chance the secondary locks are not properly seated during assembly, they will be pressed into locked position during the mating of the connector. Deutsch DT Series Deutsch DTM Series These standard “DT” receptacle shells feature internal pin type contact buss bar arrangements that allow common connections from 3 to 12 size 16 contacts. Buss bars are available in standard nickel or gold to match common Deutsch Industrial contacts. Other features include the use of standard “DT” plugs to mate with these environmental receptacles. Plugs with any Deutsch modification are intermatable. Deutsch DT Bussed Series Deutsch DTP Series Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors. The series meets the same specifications as the DTM and DT but offers the designer the ability to use multiple 12 gauge contacts, each with a 25 amp continuous capacity, within a single shell. Based on the DTM overall design, it offers the protected interfacial seal located within the receptacle shell. Standard multi-seal grommet is used in both the plug and receptacle. Currently available in two and four pin configurations. Deutsch DTHD Series Deutsch developed the DTHD Series for those applications requiring a complete, environmentally sealed, single power circuit termination. DTHD plugs and receptacles can be permanently assembled with thermoplastic end caps that prevent removal of the silicone wire seal grommets. Designed for diesel engine, electronic fuel injectors, automatic transmissions, ABS brakes and other applications that involve fuel and oil exposure. These end caps provide the additional reliability required for critical wiring circuits. A STEP AHEAD DT Series Manual #50907.indd 4 7/31/2008 5:14:35 PM
DT Series Technical Manual Plug/Receptacle Shell: Thermoplastic Wedge: Thermoplastic Grommet: Silicone Rubber Contacts Pin: Copper Alloy Socket: Copper Alloy Finish: Nickel (optional - gold) Plated Sealing Plugs Thermoplastic: (All sizes) Dielectric Withstanding Voltage Current leakage less than 2 milliamps at 1500 VAC Insulation Resistance: 1000 megohms minimum at 25 Current Rating (Contact current rating @ 1250 C (continuous) Size 20: 7.5 amps Size 16: 13 amps Size 12: 25 amps Size 8: 60 amps Size 4: 100 amps Submersion: Properly wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage. Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications. Vibration: No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. Temperature: Operative at temperatures from -55 C to +125 C. Continuous at rated current. Contact Retention: Contacts withstand a minimum load of: 20 lbs (89N) for size 20 25 lbs (111N) for size 16 30 lbs (133N) for size 12 35 lbs (156N) for size 8 35 lbs (156N) for size 4 MATERIAL SPECIFICATIONS GENERAL SPECIFICATIONS Thermal Cycle: No cracking, chipping or leaking after 20 test cycles from -55 C to +125 Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement. CONTACT RESISTANCE CONTACT SIZE WIRE GAUGE AWG(mm2) Test Current (Amps) Resistance (mV) Solids Resistance (mV) Stamped & Formed 18 (.80) 16 (1.0) 20 (.50) 16 (1.0) 7.5 60 100 13 60 100 13 60 100 7.5 60 100 7.5 60 100 10 60 100 16 20 (.50) 14 (2.0) 18 (.80) 7.5 60 100 14 (2.0) 12 (3.0) 12 18 60 100 25 60 100 8 (8.60) 10 (5.60)
60 N/A
6 (13.0) 60 N/A 100 CONTACT SIZE N-SEAL #20 #16 #12 E-SEAL .280-.292 (7.11-7.42) .134-.170 (3.40-4.32) N/A .190-.240 (4.83-6.10) N/A .097-.158 (2.46-4.01) .088-.145 (2.24-3.68) .053-.120 (1.35-3.05) .053-.120 (1.35-3.05) N/A RECOMMENDED WIRE INSULATION O.D. WIRE SEALING RANGE A STEP AHEAD DT Series Manual #50907.indd 5 7/31/2008 5:14:35 PM
DT Series Technical Manual PART NUMBERING SYSTEM (DTHD) Series Prefix 04 = Receptacle 06 = Plug Single Terminal Contact Size 4 = Size 4 8 = Size 8 12 = Size 12 Contact Style P = Pin Receptacle Only S = Socket Plug Only Special Modifications PART NUMBERING SYSTEM (DTM) Series Prefix 04 = Receptacle 06 = Plug Number of Contacts Special Modifications Polarizing Position (If Applicable) 08 + 12 Only Contact Type P = Pin Receptacle Only S = Socket Plug Only PART NUMBERING SYSTEM (DT & DT Bussed) Series Prefix 04 = Receptacle 06 = Plug Number of Contacts Special Modifications Polarizing Position (If Applicable) Contact Type P = Pin Receptacle Only S = Socket Plug Only PART NUMBERING SYSTEM (DTP) Series Prefix 04 = Receptacle 06 = Plug Number of Contacts Special Modifications Polarizing Position (If Applicable) Contact Type P = Pin Receptacle Only S = Socket Plug Only A STEP AHEAD DT Series Manual #50907.indd 6 7/31/2008 5:14:35 PM
DT Series Technical Manual DTM Series Size 20 Contacts DT & DT BUSSED Series Size 16 Contacts 2 size 16 3 size 16 4 size 16 6 size 16 8 size 16 12 size 16 DTP Series Size 12 Contacts 2 size 12 4 size 12 2 size 20 3 size 20 4 size 20 8 size 20 6 size 20 12 size 20 DTHD Series Size 4, 8 & 12 1 size12 1 size 4 1 size 8 A STEP AHEAD DT Series Manual #50907.indd 7 7/31/2008 5:14:35 PM
DT Series Technical Manual DT Series BUSSED Arrangements
12 PIN
8 PIN
4 PIN 6 PIN
43 DEUTSCH
6 PIN
MAX CURRENT RATINGS NICKEL BUSS P/N DT04-4P-EP12 DT04-6P-EP12 DT04-6P-EP15 DT04-8PB-P016 DT04-8PB-PO29 DT04-8PB-P027 DT04-3P-* DT04-12PB-P016 DT04-12PB-P027 DT04-12PB-P031 GOLD BUSS P/N DT06-4S- DT06-6S- DT06-6S- DT06-08SB- DT06-08SB- DT06-08SB- DT06-3S- DT06-12SB- DT06-12SB- DT06-12SB- MATING PLUG P/N DT04-4P-EP13 DT04-6P-EP13 DT04-6P-EP14 DT-8PB-P021 DT04-8PB-PO28 DT04-8PB-P026 DT04-3P-* DT04-12PB-P021 DT04-12PB-P026 DT04-12PB-P030
4 PIN = 26 AMPS
6 PIN = 39 AMPS
3 PIN = 13 AMPS
8 PIN = 52 AMPS
5 PIN = 26 AMPS
12 PIN = 76 AMPS
FOR “BLACK” PLEASE CONSULT FACTORY FOR AVAILABILITY AND ALTERNATE KEYING Arrangements shown are currently available. For additional arrangements contact factory. Standard DT Receptacles Bussed to Customer Specifications A STEP AHEAD DT Series Manual #50907.indd 8 7/31/2008 5:14:36 PM
CONTACTS AND APPLICATION DATA Solid Contacts For proper dies and stamped & formed crimp dimensions - See Envelope 0425-208-0000 12 Size Consult factory for alternate finishes 0425-203-0000 16 Size 0425-207-0000 20 Size 0425-059-0000 16,20 Size 0425-039-0000 16 Size 0425-041-0000 12 Size N/A 1062-20-03 N/A 1062-16-14** STAMPED & FORMED CONTACT PART NUMBERS SIZE PIN SOCKET 20 - 01 20 - 02 20 - 03 14-16 14 -16 16 - 18 0.5 - 1.0 0.75 - 2.0 16 - 18 1.0 - 2.5 14 - 16 12 - 14 10 - 12 CARRIER STRIP IDENTIFICATION WIRE SIZE AWG (mm2) 16 - 22 (1.0 - 0.35) 16 - 22 (1.0 - 0.35) 16 - 22 (1.0 - 0.35) 14 - 18 (2.0 - .75) 14 - 18 (2.0 - .75) 14 - 18 (2.0 - .75) 16 - 20 (1.0 - 0.50) 14 - 18 (2.0 - .75) 14 - 18 (2.0 - .75) 12 - 16 (2.5 - 1.0) 12 - 16 (2.5 - 1.0) 12 - 14 (4.0 - 2.0) 10 - 12 (6.0 - 4.0) WIRE INSULATION O.D. RANGE .075 - .125 (1.91 - 3.15) .051 - .085 (1.30 - 2.16) .075 - .125 (1.91 - 3.15) .095 - .150 (2.41 - 3.81) .095 - .150 (2.41 - 3.81) .075 - .140 (1.91 - 3.55) 055 - .100 (1.40 - 2.54) .075 - .140 (1.91 - 3.55) .075 - .140 (1.91 - 3.55) .075 - .140 (1.91 - 3.55) .075 - .140 (1.91 - 3.55) .113 - .176 (2.87 - 4.47) .140 - .204 (3.56 - 5.18) .150 - .200 (3.81 - 5.08) .150 - .200 (3.81 - 5.08) .150 - .200 (3.81 - 5.08) .150 - .200 (3.81 - 5.08) .150 - .200 (3.81 - 5.08) .150 - .200 (3.81 - 5.08) .150 - .200 (3.81 - 5.08) .150 - .200 (3.81 - 5.08) .150 - .200 (3.81 - 5.08) .175 - .225 (4.45 - 5.72) .175 - .225 (4.45 - 5.72) .225 - .275 (5.72 - 6.991) .225 - .275 (5.72 - 6.99) MIN CONT. RETENTION LBS (N) (89) (89) (89) (111) (111) (111) (111) (111) (111) (111) (111) (134) (134) REF CRIMP TENSILE LBS (N) 20 - 10 (89 - 45) 20 - 10 (89 - 45) 20 - 10 (89 - 45) (111) (111) (111) 25 - 15 (111 - 67) (111) (111) (111) (111) (311) (311) MAX RATED AMPS AT 1250 C CONTINUOUS 7.5 7.5 7.5 RECOMMENDED STRIP LENGTH INCHES (mm) Stamped & Formed Contacts INSPECTION HOLE Solid Contacts Stamped and Formed Contacts Socket Pin Pin SocketINSPECTION HOLE * See Envelope Print 0425-205-0000. Consult factory for alternate finishes. SIZE SOLID CONTACT PART NUMBERS WIRE SIZE AWG (mm2) RECOMMENDED STRIP LENGTH INCHES (mm) MIN CONTACT RETENTION LBS (N) REF CRIMP TENSILE LBS (N) MAX RATED AMPS AT 1250C CONTINUOUS PIN SOCKET (0.50) (2.0) 16-20 (1.0 - 0.50) 12-14 (3.0 - 2.0) .156-.218 (3.96 - 5.54) .250 - .312 (6.35 - 7.92) .250 - .312 (6.35 - 7.92) .222 - .284 (5.64 - 7.21) (89) (111) (111) (134) (89) (311) 35-20 (156-89) 75-70 (334 - 311) 7.5 (13.0) 8-10 (8.0 - 5.0) .430-.492 (10.92-12.50) .430 - .492 (10.92 - 12.50) (156) (156) 300 (1334) 100 125-90 (556-400) 60 DT Series Technical Manual A STEP AHEAD DT Series Manual #50907.indd 9 7/31/2008 5:14:36 PM
DT Series Technical Manual Contact Retention System (DTHD) Rquired Removal Tool (See page 12) TOOL AND CONTACT REMOVED Contact Insertion Procedure UNLOCKED POSITION CONTACT INSERTION LOCKING FINGERS CONTACT CONTACT LOCKED POSITION TOOL INSERTED TO UNLOCK CONTACT SCREW DRIVER INSERTED TO UNLOCK CONTACT CONTACT REMOVED CONTACT LOCKED IN POSITIONUNLOCKED POSITION Contact Removal Procedure (DTM/DT/DTP) Contact Insertion System (DTM/DT/DTP) CONTACT INSERTION CONTACT LOCKING FINGER A STEP AHEAD DT Series Manual #50907.indd 10 7/31/2008 5:14:36 PM
DT Series Technical Manual Assembly Contact Insertion (DTM, DT, DTP) Contact Removal 1. Grasp crimped contact approximately 1.0” (25.4mm) behind the contact barrel. 2. Hold connector with rear grommet facing you. 3. Push contact straight into connector grommet until a click is felt. A slight tug will confirm that it is properly locked in place. 4. Once all contacts are in place, insert orange wedge: receptacles - with half holes aligning with contacts. Plugs - with contacts aligning behind full holes. The orange wedge will snap into place. 1. Remove orange wedge using needlenose pliers to pull wedge straight out. 2. To remove the contacts, gently pull wire backwards, while at the same time releasing the locking finger by moving it away from the contact with a screwdriver. 3. Hold the rear seal in place, as removing the contact will displace the seal. NOTE: The receptacle is shown - use the same procedure for plug. A STEP AHEAD DT Series Manual #50907.indd 11 7/31/2008 5:14:37 PM
DT Series Technical Manual Accesso- Accessories To meet the application requirements where wires are to be protected, the DT Series may be supplied with boot adaptors. These will accept shaped boots / sleeves or shrink tubing. Parts for standard or thin wall wire are available. Shrink Boot Adaptor Modification Numbers Part Number - Plugs Part Number - Receptacles PART NO. NORMAL WIRE SEALS (N) WIRE RANGE AWGSIZE 114010 114008 114009 12-14 8-10 PART NO. EXTRA THIN WALL WIRE SEALS (E) WIRE RANGE AWGSIZE 0411-337-1205 0411-353-0805 114009 12-14 8-10 CONTACT SIZE SEALING PLUG PART NO. 16 -12 0413-204-2005 114017 114018 114019 DTHD Removal Tools Sealing Plugs DT06-2S DT06-3S DT06-4S DT06-6S DT06-8SA DT06-12SA -E008 -E008 -E008 -E008 -E008 -E008 -CE04 -CE04 -CE04 -CE04 -CE04 -CE04 -EP11 -EP11 -EP11 -EP11 -EP11 -EP11 -CE13 -CE13 -CE13 -CE13 -CD13 -CD13 Number of Ways BlackGrey Basic Part Number Std. Thin Wall Std. Number of Ways BlackGrey Basic Part Number Std. Thin Wall Std. DT04-2P DT04-3P DT04-4P DT06-6P DT04-8PA DT04-12PA -E008 -E008 -E008 -E008 -E008 -E008 -CE04 -CE04 -CE04 -CE04 -CE04 -CE04 -EE11 -EE11 -EE11 -EE11 -EE11 -EE11 -CE09 -CE09 -CE09 -CE09 -CE09 -CE09 Wire Sealing Range: Standard - 2.24mm - 3.68mm wire insulation diameter Thin wall - 1.35mm - 3.05mm wire insulation diameter Thin Wall Thin Wall A STEP AHEAD DT Series Manual #50907.indd 12 7/31/2008 5:14:37 PM
DT Series Technical Manual Accessories 1027-003-1200 1011-026-0205 (Thru Hole) 1027-014-0800 1027-001-0800 1027-004-1200 1027-005-1200 1011-030-0205 (Snap Fit) 1011-027-0805 (Thru Hole) DT Mounting Clips Metal Mounting Clips Metal Mounting Clips Plastic Mounting Clips 1027-003-1200 1027-005-1200 1027-004-1200 1027-001-0800 1027-014-0800 Part Number Used On Material DTM (all) DT 2, 3, 4, 6, 12 DTP (all) DTHD (all) DTM (all) DT 2, 3, 4, 6, 12 DTP (all) DTHD (all) DTM (all) DT 2, 3, 4, 6, 12 DTP (all) DTHD (all) DT 8 cavity only DT 8 cavity only Stainless Steel Stainless Steel Stainless Steel w/Zinc Plating Stainless Steel Stainless Steel w/Zinc Plating .433 (11.0) .512 (13.0) .512 (13.0) .433 (11.0) .323 (8.2) Hole O.D. in. (mm) 1011-026-0205 1011-027-0805 1011-027-0805 Plastic Plastic Plastic Gray Gray Black Part Number DTM (all) DT 2, 3, 4, 6, 12 DTP (all) DTHD (all) DT 8 Cavity Only DTM (all) DT 2, 3, 4, 6, 12 DTP (all) DTHD (all) Used On Material Color 1011-310-0205 (W/Self Mounting Stud) A STEP AHEAD DT Series Manual #50907.indd 13 7/31/2008 5:14:38 PM
DT Series Technical Manual Accessories The Deutsch range of Back Shells is designed to snap fix onto the full range of standard DT connectors (i.e. without end cap). The innovative design allows each unit to accommodate several different sizes of slit or unslit corrugated tubes. They are available for both plugs and receptacles and the options include straight (1800) and right angled (900) adaptors for 2, 3, 4, 6, 8 and 12 way, additionally a version equipped with strain relief features 2, 3, 4 and 6 way for jacked cables. Back Shells Receptacle 1800 b a L H Plug 900 Connector DT04-2P DT06-2S DT04-3P DT06-3S DT04-4P DT06-4S DT04-6P DT06-6S DT-04-8P DT06-8S DT04-12P DT06-12S 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 18,0 18,0 18,0 18,0 16,0 16,0 16,0 16,0 25,0 25,0 25,0 25,0 21,0 21,0 21,0 21,0 22,0 22,0 22,0 22,0 20,0 20,0 20,0 20,0 26,0 26,0 26,0 26,0 23,5 23,5 23,5 23,5 27,5 27,5 26,5 24,5 26,0 26,0 23,0 23,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 23,0 23,0 23,0 23,0 23,0 23,0 23,0 23,0 22,0 22,0 22,0 22,0 22,0 22,0 22,0 22,0 21,5 21,5 21,5 21,5 20,0 20,0 21,0 21,0 28,0 28,0 28,5 28,5 35,5 36,5 36,0 36,0 54,5 54,5 40,0 40,0 45,5 45,5 31,0 31,0 64,5 64,5 44,0 44,0 56,0 56,0 36,0 36,0 59,5 59,5 43,0 43,0 53,0 53,0 35,0 35,0 64,0 64,0 43,0 43,0 55,5 55,5 38,0 38,0 62,0 47,5 57,0 39,5 63,5 53,0 58,5 43,5 37,0 37,0 37,0 37,0 48,0 48,0 48,0 48,0 45,0 45,0 45,0 45,0 50,0 50,0 50,0 50,0 50,5 49,0 50,5 50,0 61031-23 61031-33 61031-24 61031-34 61031-25 61031-35 61031-26 61031-36 61051-23 61051-33 61051-24 61051-34 61051-25 61051-35 61051-26 61051-36 61048-23 61048-33 61048-24 61048-34 61048-25 61048-35 61048-26 61048-36 61057-23 61057-33 61057-24 61057-34 61057-25 61057-35 61057-26 61057-36 61049-33 61049-34 61049-35 61049-36 61052-33 61052-34 61052-35 61052-36 1011-257-0205 1011-229-0205 1011-258-0205 1011-230-0205 1011-255-0205 1011-227-0205 1011-256-0205 1011-228-0205 1011-261-0305 1011-233-0305 1011-262-0305 1011-234-0305 1011-259-0305 1011-231-0305 1011-260-0305 1011-232-0305 1011-265-0405 1011-237-0405 1011-266-0405 1011-238-0405 1011-263-0405 1011-235-0405 1011-264-0405 1011-236-0405 1011-269-0605 1011-241-0605 1011-270-0605 1011-242-0605 1011-267-0605 1011-239-0605 1011-268-0605 1011-240-0605 1011-245-0805 1011-246-0805 1011-243-0805 1011-244-0805 1011-249-1205 1011-250-1205 1011-247-1205 1011-248-1205 Outlet Strain Relief Envelope Dimensions (mm) Item No.a b L H x x x x x x x x x x x x x x x x Part No. Tube Size by Connector and Additional Length (mm) needed Material: PA 6.6 / black IP rating: IP40 Operating Temperatures: -40 to 1250 C Handling Temperature: -5 to 450 C L b a b L a Plug 1800 a b L Receptacle 900 H A STEP AHEAD DT Series Manual #50907.indd 14 7/31/2008 5:14:38 PM
DT Series Technical Manual Accessories Back Shells Connector DT04-2P / DT06-2S DT04-3P / DT06-3S DT04-4P / DT06-4S DT04-6P / DT06-6S DT04-8P / DT06-8S DT04-12P / DT06-12S Corrugated Tube Details X + 16,0 X + 18,0 X + 16,0 9,3 2,8 X + 16,0 X + 18,0 X + 16,0 10,0 2,7 X + 10,0 X + 12,5 X + 10,0 X + 20,0 X + 20,0 11,7 2,4 X + 7,0 X + 7,0 X+ 13,0 X + 14,0 X + 24,5 13,0 2,7 X + 7,0 X + 8,0 X + 16,0 15,8 2,7 X + 10,0 21,2 3,3 NW6 NW7,5 NW8,5 NW10 NW13 NW17 D P X = Tube length needed for harness Tube size by connector and additional length (mm) needed Connector DT04-2P / DT06-2S DT04-3P / DT06-3S DT04-4P / DT06-4S DT04-6P / DT06-6S DT04-8P / DT06-8S DT04-12P / DT06-12S F P (N) FP(N) Pull Off Strength Valid for unslit corrugated tubes. Follow also connector mounting instruction: no force must apply to wires and connector to maintain continuous tightness of the connection. * The corrugated tube must be placed into the ribs as per the above table. Connector DT04-2P / DT06-2S DT04-3P / DT06-3S DT04-4P / DT06-4S DT04-6P / DT06-6S DT04-8P / DT06-8S DT04-12P / DT06-12S NW6 NW7,5 NW8,5 NW10 NW13 NW17 Ribs to be used for tube mounting* FP FP FT FT 900 900 Strain Relief P D NW Tube details (sectional view) Rib No.: 6 3 1 A STEP AHEAD DT Series Manual #50907.indd 15 7/31/2008 5:14:39 PM
3850 Industrial Avenue, Hemet, California 92545 Tel.: (951) 765-2250 - Fax: (951) 765-2255 Web: www.deutsch.net - Edition 2007 INDUSTRIAL Deutsch Industrial UK Stanier Road St. Leonards On Sea East Sussex TN 38 9RF England Ph. 44 (0) 1424 852 722 Fax 44 (0) 1424 855 979 industrialuk@deutsch.net Deutsch Industrial US 3850 Industrial Ave. Hemet, CA 92545 USA Ph. +1 (951) 765-2250 Fax +1 (951) 765-2255 insidesales-ipd@deutsch.net Deutsch Industrial Europe Fraunhoferstrasse 11b
82152 Martinsried
Ph. +49 (0) 89 899157-0 Fax +49 (0) 89 857 4684 info.eu@deutsch.net Deutsch Industrial Japan NIHON Deutsch Ltd. 44-10, Ohyamakanai-cho Itabashi-ku, Tokyo 173-0024 Japan Ph. + 81-3-5995-5192 Fax + 81-305995-5193 rtakemura@nihon-deutsch.co.jp Deutsch Connectors Trading (Shanghai) Co., Ltd. Room 1032, 10F Central Plaza,
381 Huai Hai Zhong Road,
Shanghai 200020, China Tel/Fax: 86-21-6391 5902 E-mail: salesdichina@deutsch.net Deutsch India Power Connectors Pvt.Ltd. 104, Prestige Omega EPIP zone, 1st Phase, White Field, Bangalore - 560 066. INDIA. Ph: +91 80 40466525 Mobile: +91 98454 03301 A STEP AHEAD DT Series Manual #50907.indd 16 7/31/2008 5:14:39 PM