100ELT22 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

I Typical propagation delay of 300 ps I <100 ps between outputs I Max ICC of 30 mA I Fairchild MSOP-8 package is a drop-in replacement to ON TSSOP-8 I Flow through pinout I Meets or exceeds JEDEC specification EIA/JESD78 IC latch-up test I Moisture Sensitivity Level 1 I ESD Performance: Human Body Model > 2000V Machine Model > 200V Ordering Code: Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Connection Diagram Top View Pin Descriptions Logic Diagram Order Number Product Package DescriptionPackage Code Number Top Mark 100ELT22M M08A KLT22 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 100ELT22M8 (Preliminary) MA08D KT22 8-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide Pin Name Description Q n, Qn PECL Differential Outputs D 0, D1 TTL Inputs VCC Positive Supply GND Ground

www.fairchildsemi.com 2 100ELT22 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: Output parameters vary 1 to 1 with VCC . VCC can vary +0.5V/−0.8V. Note 3: Outputs are terminated through a 50Ω Resistor to VCC − 2.0V. Note: Devices are designed to meet the DC specifications after thermal equilibrium has been established. Circuit is tested with air flow greater than 500LFPM maintained. Note 4: VCC can vary +0.5V/−0.8V. Note 5: VCC can vary +0.5V/−0.8V. Note 6: Specifications for standard TTL input signal (see Figure 1). Note 7: Within-device skew is defined as identical transitions on similar paths through a device. Supply Voltage (VCC ) 0.0V to +7.0V Input Voltage (VI) VI ≤ VCC 0.0V to + 7.0V DC Output Current (IOUT ) Continuous 50 mA Surge 100 mA Storage Temperature (TSTG ) −65°C to + 150°C Power Supply Operating V CC = 4.2V to 5.5V TTL Input Voltage 0.0V to V CC Free Air Operating Temperature (TA) −40°C to +85°C Symbol Parameter −40°C2 5 °C8 5 °C Units Min Typ Max Min Typ Max Min Typ Max ICC Power Supply Current 30 30 30 mA VOH Output HIGH Voltage (Note 3) 3915 3995 4120 3975 4045 4120 3975 4050 4120 mV VOL Output LOW Voltage (Note 3) 3170 3305 3445 3190 3295 3380 3190 3295 3380 mV Symbol Parameter Min Typ Max Units Condition IIH Input HIGH Current 20 µA VIN = 2.7V

100 V IN = VCC

IIL Input LOW Current −200 µAV IN = 0.5V VIK Clamp Diode Voltage −1.2 V I IN = −18 mA VIH Input HIGH Voltage 2.0 V VIL Input LOW Voltage 0.8 V Symbol Parameter −40°C2 5 °C8 5 °C Units Figure Min Typ Max Min Typ Max Min Typ Max Number fMAX Maximum Input Frequency TBD TBD TBD MHz tJITTER Cycle-to-Cycle Jitter TBD TBD TBD ps tPLH , tPHL Propagation Delay to Output (Note 6) 100 600 100 600 100 600 ps Figure 1 tr, tf Output Rise Time/Fall Times 200 500 200 500 200 500 ns Figure 2 (20% to 80%) tskpp Part to Part Skew 500 500 500 ps tskew Within Device Skew (Note 7) 100 100 100 ps

www.fairchildsemi.com 4 100ELT22 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M08A

Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5 www.fairchildsemi.com 100ELT22 5V Dual TTL to Differential PECL Translator Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 8-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com