100EL16

100EL16 FAIRCHILD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

I Typical propagation delay of 250 ps I Typical IEE of 18 mA I Internal pull-down resistors on inputs I Fairchild MSOP-8 package is a drop-in replacement to ON TSSOP-8 I Meets or exceeds JEDEC specification EIA/JESD78 IC latch-up test I Moisture Sensitivity Level 1 I ESD Performance: Human Body Model > 2000V Machine Model > 200V Ordering Code: Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Connection Diagram Top View Pin Descriptions Logic Diagram Order Number Package Product Package DescriptionNumber Code Top Mark 100EL16M M08A KEL16 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 100EL16M8 (Preliminary) MA08D KL16 8-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide Pin Name Description Q, Q ECL Data Outputs D, D ECL Data Inputs VBB Reference Voltage VCC Positive Supply VEE Negative Supply NC No Connect

www.fairchildsemi.com 2 100EL16 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: Input and output parameters vary 1 to 1 with VCC . VEE can vary +0.8V/−0.5V. Note 3: Outputs are terminated through a 50Ω Resistor to VCC − 2.0V. Note 4: VIHCMR minimum varies 1 to 1 with VEE . VIHCMR maximum varies 1-to-1 with VCC . The VIHCMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPMIN and 1V. Note 5: Absolute value of the input HIGH and LOW current should not exceed the absolute value of the stated Min or Max specification. Note: Devices are designed to meet the DC specifications after thermal equilibrium has been established. Circuit is tested with air flow greater than 500LFPM maintained. Note 6: Input and output parameters vary 1 to 1 with VCC . VEE can vary +0.8V/−0.5V. Note 7: Outputs are terminated through a 50Ω Resistor to VCC − 2.0V. Note 8: VIHCMR minimum varies 1 to 1 with VEE . VIHCMR maximum varies 1 to 1 with VCC . The VIHCMR range is referenced to the most positive side of the dif- ferential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPMIN and 1V. Note 9: Absolute value of the input HIGH and LOW current should not exceed the absolute value of the stated Min or Max specification. PECL Supply Voltage (VCC ) VEE = 0V 0.0V to +8.0V NECL Supply Voltage (VEE ) VCC = 0V 0.0V to −8.0V PECL DC Input Voltage (VI) VEE = 0V 0.0V to +6.0V NECL DC Input Voltage (VI) VCC = 0V 0.0V to −6.0V DC Output Current (IOUT ) Continuous 50 mA Surge 100 mA VBB Sink/Source Current (IBB ) ±0.5 mA Storage Temperature (TSTG ) −65°C to +150°C PECL Power Supply (VEE = 0V) V CC = 4.2V to 5.5V NECL Power Supply (VCC = 0V) V EE = −4.2V to −5.5V Free Air Operating Temperature (TA) −40°C to +85°C Symbol Parameter −40°C2 5 °C8 5 °C Units Min Typ Max Min Typ Max Min Typ Max IEE Power Supply Current 18 22 18 22 21 26 mA VOH Output HIGH Voltage (Note 3) 3915 3995 4120 3975 4045 4120 3975 4050 4120 mV VOL Output LOW Voltage (Note 3) 3170 3305 3445 3190 3295 3380 3190 3295 3380 mV VIH Input HIGH Voltage (Single Ended) 3835 4120 3835 4120 3835 4120 mV VIL Input LOW Voltage (Single Ended) 3190 3525 3190 3525 3190 3525 mV VIHCMR Input HIGH Voltage Common Mode Range (Differential) (Note 4) IIH Input HIGH Current (Note 5) 150 150 150 µA IIL Input LOW Current (Note 5) 0.5 0.5 0.5 µA Symbol Parameter −40°C2 5 °C8 5 °C Units Min Typ Max Min Typ Max Min Typ Max IEE Power Supply Current 18 22 18 22 21 26 mA VOH Output HIGH Voltage (Note 7) −1085 −1005 −880 −1025 −955 −880 −1025 −955 −880 mV VOL Output LOW Voltage (Note 7) −1830 −1695 −1555 −1810 −1705 −1620 −1810 −1705 −1620 mV VIH Input HIGH Voltage (Single Ended)−1165 −880 −1165 −880 −1165 −880 mV VIL Input LOW Voltage (Single Ended)−1810 −1475 −1810 −1475 −1810 -1475 mV VIHCMR Input HIGH Voltage Common Mode Range (Differential) (Note 8) IIH Input HIGH Current (Note 9) 150 150 150 µA IIL Input LOW Current (Note 9) 0.5 0.5 0.5 µA

www.fairchildsemi.com 4 100EL16 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M08A

Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5 www.fairchildsemi.com 100EL16 5V ECL Differential Receiver Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 8-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com