DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model 100200P4Z50-2 Features:
- DC – 3.0 GHz
- 10 Watts
- BeO Ceramic
- Non-Nichrome Resistive Element
- Low VSWR
- 100% Tested Surface Mount Termination
10 Watts, 50Ω
Resistive Element Thick film Substrate Beryllium oxide ceramic Terminals Tin/Lead 60/40 over Nickel Electrical Specifications Resistance Range: 50 ohms, ± 2% Frequency Range; DC – 3.0 GHz Power: 10 Watts VSWR 1.25:1 DC – 3.0 GHz Note: Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. Operating temperature is -55ºC to 125ºC (see chart for derating temperatures). All dimensions in inches. Specifications subject to change with out notice. Outline Drawing 100200P4Z50-2 (097) Rev A
USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing. Model 100200P4Z50-2 Typical Performance: Data shown is for the 100200-4Z50-2 Data shown is for the 100200-4Z50-2 Power De-rating: Mounting Footprint and Procedure: SUGGESTED MOUNTING PROCEDURES: 1. MAKE SURE THAT THE DEVICES ARE MOUNTED ON FLAT SURFACES (.001" UNDER THE DEVICE) TO OPTIMIZE THE HEAT TRANSFER. DRILL & TAP THE HEATSINK FOR THE APPROPRIATE2. THREAD SIZE TO BE USED. 3. COAT HEATSINK WITH A MINIMUM AMOUNT OF HIGH QUALITY SILICONE GREASE (.001" MAX. THICKNESS). 4. POSITION DEVICE ON MOUNTING SURFACE & SECURE USING SOCKET HEAD SCREWS, FLAT & SPLIT WASHER. TORQUE SCREWS TO THE APPROPRIATE VALUE. MAKE SURE THAT THE DEVICE IS FLAT AGAINST THE HEATSINK. (CARE SHOULD BE TAKEN TO AVOID UPWARD PRESSURE OF THE LEADS TOWARDS THE LID). SOLDER LEADS IN PLACE USING APPROPROATE SOLDER WITH A CONTROLLED TEMPERATURE IRON. FOR MORE DETAILS CONTACT FACTORY 100200P4Z50-2 (097) Rev A