100200N4Z50-2 ANAREN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 Model 100200N4Z50 -2 Features:
- DC – 2.0 GHz
- 10 Watts
- AlN Ceramic
- Non-Nichrome Resistive Element
- Low VSWR
- 100% Tested Surface Mount Termination
10 Watts, 50 Ω
Resistive Element Thick film Substrate Aluminum nitride ceramic Terminals Tin/Lead, 90/10 over nickel Electrical Specifications Resistance Range: 50 ohms, ± 2% Frequency Range; DC – 2.0 GHz Power: 10 Watts VSWR 1.25:1 DC – 2.0 GHz Note: Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. Operating temperature is -55ºC to 125ºC (see chart for derating temperatures). All dimensions in inches. Specifications subject to change with out notice. Outline Drawing 100200N4Z50-2 (097) Rev A
USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing. Model 100200N4Z50 -2 Typical Performance: Power De-rating: Mounting Footprint and Procedure: 1. Solder part in place using 60/40 type solder wit h Temperature controlled iron (700° F). 2. Drill thermal vias through PCB and fill with sol der, such as 60/40 type. 3. To ensure good thermal connectivity to heat sink , drill and tap heatsink and mount PCB board to heat sink using screws. 100200N4Z50-2 (097) Rev A