1000_V01 CK | Alldatasheet

Document overview

  • PDF pages: 6

Technical content

I–11 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com

1000 Series

  • Variety of actuators and terminations
  • Panel mount tabs available
  • Epoxy terminal seal—compatible with bottom-wash cleaning
  • RoHS compliant Typical Applications
  • Test & measurement equipment
  • Telecommunications
  • Computer & peripherals Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 6 AMPS @ 120 V AC or 28 V DC, 3 AMPS @ 250 V AC. See page I-16 for additional ratings. ELECTRICAL LIFE: 100,000 make-and-break cycles at full load on models with B, K or P contact material; 40,000 cycles on models with G, Q, L, M, S or R contact material. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 65ºC SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). Materials CASE: diallyl phthalate (DAP), (UL 94V-0). ACTUATOR: Nylon, black, standard. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page I-16 for additional contact materials. CENTER CONTACT & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page I-16 for additional contact materials. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical Data chapter NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I–12 through I –16. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function

1101 SP On-None-On

1103 SP On-Off-On

1108 SP Mom-None-On

1201 DP On-None-On

1203 DP On-Off-On

S3 .200” high S1 .040” high S2 .140” high S4 .285” high S5 .370” high S6 .485” high T3 .200” high Contact Material B Gold Q Silver G Gold over silver P Gold, matte-tin S Silver, matte-tin R Gold over silver, matte-tin Seal E Epoxy D No epoxy seal I Epoxy potted base Actuator Color

2 Black

1 White

3 Red

A Right angle, PC thru-hole C PC Thru-hole AV2 Vertical right angle, PC thru-hole Z Solder lug V3 V-bracket V4 V-bracket W .750” long, wire wrap Z3 Quick connect Models Available 19 dec 18

I–12 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com ISlide All actuators except T3. Single pole For T3 actuator only. Double pole .275 (6,99) M2 PC MOUNTING WITHOUT TABS M1 PANEL MOUNTING WITH TABS MOM. = Momentary All models with all options when ordered with G, Q, S or R contact material. NOTE: Available with A, AV2, C, V3, V4, W terminations only. NOTE: Available with C, W, Z, Z3 terminations only. No mounting hardware supplied. DPDT 2-3,5-6OPEN2-1,5-4 ON NONE ON ON OFF ON 1201 1203 DP SPDT 2-3 N/A OPEN N/A 1-2 ON NONE ON ON OFF ON MOM. NONE ON 1101 1103 1108 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 SWITCH FUNCTION POS. 1 POS. 2 POS. 3 MODEL NO. NO. POLES DPDT SPDT Part number shown: 1101M2S3CQE2 Part number shown: 1201M2S3CQE2 0.95 (2,41) Actuator shown in position 1 Terminal Nos. For Reference Only 19 dec 18

I–13 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com 120X models only. 110X models only. * * 120X models only. DIM "B' .188 [4,78] DIM "A" .075 EPOXY SEAL [1,91] OPTION DIM "A" DIM "B" PC MOUNTING .750 (19,05) .080[2,03] .048 [1,22] .155[3,92] .188 [4,78] .075 [1,91] EPOXY SEAL C PC THRU-HOLEZ SOLDER LUG W WIRE WRAPZ3 QUICK CONNECT T3 .200” HIGHS6 .485” HIGHS5 .370” HIGH S4 .285” HIGHS3 .200” HIGH S2 .140” HIGH S1 .040” HIGH SPDT & DPDT SPDT & DPDT SPDT & DPDT SPDT & DPDT OPTION CODE ACTUATOR COLOR

7 BLUE

9 GRAY

Other colors available, consult Customer Service Center. Not available with P, S or R contact materials. Not available with P, S or R contact materials. Mating quick connector available; order part number 530100000, page I-16 . * Subtract .014 (0,36) from actuator height, all models with A, AV2 - 2 pole, V3, V4 terminations. ACTUATOR ACTUATOR COLOR 19 dec 18

I–14 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com ISlide Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A .200 (5,08) PC MOUNTING AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH A RIGHT ANGLE, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE Actuator Shown In Pos. 1 SECTION A-A 1101M2S3ABE2 Horizontal Actuation SPDT 1201M2S3ABE2 Horizontal Actuation DPDT 1101M2S3AV2BE2 Vertical Actuation SPDT Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. 19 dec 18

I–15 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com Actuator Shown In Pos. 1 SECTION A-A Actuator Shown In Pos. 1 Actuator Shown In Pos. 1 Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. Not available with M1 mounting style and I seal. Not available with M1 mounting style and I seal. AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH V3, V4 VERTICAL MOUNT, V-BRACKET V3, V4 VERTICAL MOUNT, V-BRACKET 1201M2S3AV2BE2 Vertical Actuation DPDT 1101M2S3__BE2 SPDT 1201M2S3__BE2 DPDT OPTION CODE DIM ‘A’ V3 .350 (8,89) V4 .525 (13,34) OPTION CODE DIM ‘A’ V3 .400 (10,16) V4 .575 (14,61) 19 dec 18

I–16 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com ISlide 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate.

3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant. All models with all options when ordered with G, Q, S or R contact material. B contact material standard with all terminations except C, Z, Z3.. Q contact material standard with C, Z, Z3 terminations. P, S or R contact materials not available with Z, Z3 terminations. SEAL D NO EPOXY SEAL I EPOXY POTTED BASEE EPOXY SEAL Fits Z3 Termination female connector PART NO. 530100000 Available in loose pieces. NOTE: Available with C, W, W3, Z, Z3 terminations only. GOLD 3 MATTE-TIN 6 0 4 VA MAX @ 20 V AC OR DC MAX OR 6 AMPS @ 120 V AC OR 0.4 MAX. 28 V DC; 3 AMPS @ 250 V AC. 6 AMPS @ 120 V AC OR 28 V DC; 3 AMPS @ 250 V AC. 0.4 VA MAX. @ 20 V AC OR DC MAX. LOW LEVEL/DRY CIRCUIT OR POWER POWER LOW LEVEL/ DRY CIRCUIT GOLD OVER SILVER 2,3 SILVER 4,5 GOLD 1 OPTION CODE TERMINAL PLATING RATINGSCONTACT MATERIAL B P Q S G R GOLD 3 MATTE-TIN 6 * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. SILVER 4 MATTE-TIN 6 19 dec 18