09VR

09VR CTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

© 201 9 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. 2019-08-22 Rev. B Page 1 of 7 Series 09VR 9mm Panel Potentiometer  Miniature 9 mm package size  Rotational life (5,000 cycles)  Wide temperature range (-10°C to +70°C)  Mechanical travel options (280° and 300° )  Variety of standard resistances and tapers

Applications

 Consumer portable electronics  Commercial appliances  Instrument amplifiers and guitar effects  Keyboards and synthesizers  Communications equipment

Ordering Information

Code Spec.** A2 10% Log A3 15% Log B1 linear C3 15% Antilog Code Spec. 1 280° 2 300° Code Spec. M Horizontal/Side Mount Bushingless, PC Pins, 6.5mm Height B Horizontal/Side Mount Sleeve Bushing, PC Pins, 6.5mm Height S Horizontal/Side Mount Thread Bushing, PC Pins, 6.5mm Height H Vertical/Rear Mount Thread Bushing, PC Pins K Vertical/Rear Mount Sleeve Bushing, PC Pins U Vertical/Rear Mount Bushingless, PC Pins Code Spec.* 15 15 mm 20 20 mm 25 25 mm 30 30 mm Code Spec. N No Detent C Center Detent Code Spec. B Knurled (18 teeth) F Flatted L Knurled (40 teeth) Code Spec. 502 5kΩ 103 10kΩ 203 20kΩ 503 50kΩ 104 100kΩ 254 250kΩ 504 500kΩ * See shaft trim options for available lengths. ** Other JIS tapers are available. See charts. Code Spec.

1 Single

© 201 9 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 09VR 9mm Panel Potentiometer 2019-08-22 Rev. B Page 2 of 7 Electrical Specifications Min Typical Max Unit Total Resistance Tolerance -20 – +20 % Power Rating – +0.05 – watt Operating Voltage – – +20 VDC Residual Resistance – +300 – Ω Slider Noise – – +100 mV Insulation Resistance 250 VDC for 1 min. +100 MΩ Dielectric Strength 250 VAC for 1 min. no arcing Taper Linear and audio options (see charts) Mechanical Total Mechanical Travel 280° ± 5° 300° ± 5° Operating Torque 10 to 80 gf-cm Starting Torque 100 gf-cm max. Shaft Wobble Bushingless With Bushing 0.8 x L/20mm p-p max.; L = Shaft Length 0.5 x L/20mm p-p max.; L = Shaft Length Shaft Push-Pull Strength 5 kgf for 3 sec. Stop Strength 3 kgf-cm min. Detent Position 280° travel 300° travel 140° ± 5° 150° ± 5° Detent Torque 30 to 300 gf-cm Rotational Life 5,000 cycles Panel Nut Tightening Torque 6 kgf-cm IP Rating 40 Mounting Hardware One flat washer and one mounting hex nut supplied with bushing option Packaging Bulk Weight 2 grams Environmental Min Typical Max Unit Operating Temperature -10 – +70 °C Storage Temperature -30 – +70 °C Soldering Conditions Wave Solder Manual Solder Wash Preheat: 100° C max for 2 min max; Solder temperature: 260° C ± 5° C for 5 sec max.; No clean foam flux recommended 350° C ± 5° C for 3 sec max.; Sn95Ag5 no clean solder Not recommended Moisture Sensitivity Level 1 ESD Classification (HBM) Not applicable All testing is performed at room ambient conditions except as noted. Users should verify device actual performance in their specific applications . This product is compliant to RoHS3 Directive 2015/863 Amendments of Annex II on 31 March 2015, and REACH SVHC Directive EC 1907/2006 Amendments of Annex XIV & Annex XVII on 15 January 2018. Custom and value-added options available on request. Please contact your sales representative for additional information.

© 201 9 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 09VR 9mm Panel Potentiometer 2019-08-22 Rev. B Page 3 of 7 Mechanical Specifications Series 09VR Horizontal/Side Mount Bushingless Series 09VR Vertical/Rear Mount Bushingless 280° ROTATION 300° ROTATION Unit: mm

© 201 9 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 09VR 9mm Panel Potentiometer 2019-08-22 Rev. B Page 4 of 7 Mechanical Specifications Series 09VR Horizontal/Side Mount Sleeve Bushing Series 09VR Vertical/Rear Mount Sleeve Bushing 280° ROTATION 300° ROTATION Unit: mm

© 201 9 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 09VR 9mm Panel Potentiometer 2019-08-22 Rev. B Page 5 of 7 Mechanical Specifications Series 09VR Horizontal/Side Mount with Threaded Bushing Series 09VR Vertical/Rear Mount with Threaded Bushing 280° ROTATION 300° ROTATION Unit: mm

© 201 9 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 09VR 9mm Panel Potentiometer 2019-08-22 Rev. B Page 6 of 7 Mechanical Specifications

40 Tooth Knurl Shaft Trim Option

a

18 Tooth Knurl Shaft Trim Option

280° ROTATION 300° ROTATION 280° ROTATION 300° ROTATION Unit: mm

© 201 9 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 09VR 9mm Panel Potentiometer 2019-08-22 Rev. B Page 7 of 7 Electrical Specification Series 09VR Taper Graphs