09S150-055S3 ROSENBERGER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
RPC-2.40 Mismatch Plug 09S150-055S3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Fax : +49 8684 18-499 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/05.10/6.0 All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to IEC 61169-40 Mechanically compatible with RPC-1.85 Documents Material and plating Connector parts Material Plating Center conductor CuBe Gold, min. 1.27 µm, over nic kel Outer conductor Stainless steel Passivated Coupling nut Stainless steel Passivated Dielectric PS Substrate Al 2O 3
RPC-2.40 Mismatch Plug 09S150-055S3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Fax : +49 8684 18-499 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/05.10/6.0 Electrical data Frequency range DC to 50 GHz VSWR 1.1 ± 0.07, DC to 20 GHz 1.1 ± 0.13, 20 GHz to 50 GHz DC Resistance 55 Ω Power handling ≤ 0.5 W Mechanical data Mating cycles ≥ 500 Maximum torque 1.65 Nm Recommended torque 0.90 Nm Gauge 0.00 mm to 0.03 mm Environmental data Operating temperature range 1 +20 °C to +26 °C Rated temperature range of use 2 0 °C to +50 °C Storage temperature range -40 °C to +85 °C RoHS compliant 1. This range is a recommendation. However, the mismatch can be used in a wider range. Any temperature change from 23 °C results in dimensional changes 2. This range is underneath and above the operating temperature range, within the mismatch is fully functional and could be used without damage. Declaration of calibration options Factory Calibration Standard delivery for this calibration standard includes a Factory Calibration. The Calibration Certificate issued reports individual calibration results, traceable to national / international standards. Model based standard definitions are reported in an Agilent/Keysight, Rohde & Schwarz and Anritsu compatible VNA format. Accredited Calibration Not available. For further, more detailed information see application note AN001 on the Rosenberger homepage. Calibration interval Recommendation 12 months Packing Standard 1 pce in box Weight 6.7 g/pce Draft Date Approved Date Rev. Engineering change number Name Date While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.