093-1010 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- Compatible with single wire wrist straps
- Easy to use
- Easy to install
- Fully automatic Specification Table Monitor type Impedence - single wire Circuity Solid state, surface mount Alarm Audible and visible (LED) Alarm threshold 8 megohms Power 120V AC, 230V AC Adjustments None required Part Number Table Description Size Part Number ESD Wrist Strap On-line Monitor and Tester 1″ × 2.4″ × 2.3″ 093-1010 *Additional notes: Each
Page <2> V1.008/07/21 ESD Wrist Strap On-Line Monitor and Tester Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Installation 1. Check that you have received all parts: monitor, power/ground adapter and two mounting screws. 2. Using the mounting screws, mount the monitor under the work bench. (Other suggested mounting locations include the bench top and under bench shelving.) 3. Plug the power/ground adapter into the back of the monitor and into a 3-prong outlet. Operation 1. Place a wristband on your wrist and plug the coiled cord banana plug into the monitor’s banana jack. The monitor will display a green light when a functional wrist strap with good skin contact is connected to the unit. 2. The unit will sound an alarm and display a red light if the wrist strap becomes defective or if the person is not in contact with the wristband. 3. Unplug the wrist strap coiled cord from the unit to stop the alarm. 4. Monitor will alarm if the continuity from the monitor to the mat to ground is lost. Calibration The monitor is calibrated to standards traceable to NIST. Frequency of re-calibratrion should be based on the critical nature of those ESD sensitive items handled and the risk of failure for the ESD protective equipment and materials.