DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Brushable Seam Sealer Gray 08656 Technical Data Sheet July 2017 3M Part No.(s) 3M Part Descriptor(s) 08656 3M™ Brushable Seam Sealer Gray Product Description A multipurpose, fast-drying seam sealer that is easily applied with a brush. The product will not flow or run after application. Features • Holds brush marks well

  • Fast drying
  • Paintable Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Container 1 quart can Base Nitrile Rubber Density lbs/Gallon (Appx.) 8.3 Color Gray Flash Point - °F 40°F Solids Content (Appx.) 45% by Weight Consistency Thick paste Solvent Toluene, Methyl Isobutyl Ketone Service Temperature - °F -20 to 200°F Product Uses A multipurpose, fast-drying seam sealer that is easily applied with a brush. Duplicates OEM appearance when performing auto body repairs on areas where a brushed seam sealer was originally used. For professional use only. Not intended for retail sale.

3M™ Brushable Seam Sealer Gray 08656 Typical Performance Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Brush Application Non-Stringing Tack Free Time @ 75°F 15 Minutes Primed Metal Adhesion Very Good Salt Spray Resistance @ 1000 Hours No Rust Water Soak @ 2 Weeks No Rust Cold Temperature Flexibility @ -20°F No Cracks Directions for Use NOTE: 3M Best Practice is that all sealers, unless designated specifically for use on bare metal, be applied to properly prepared automotive paint or primer. Applying over bare metal may not provide adequate corrosion protection. Acid etch primer is not recommended to be used in direct contact with any 3M seam sealer. Residual acid can weaken the bond. 1. If applying to bare metal: Abrade the surface to remove all surface contaminates exposing clean bare metal. If applying to primer or paint: Scuff the surface with a fine grade abrasive or scuff pad. 2. Wash the surface with an appropriate VOC compliant product for removal of surface contaminants. 3. Open the quart can and brush/tool seam sealer onto desired surface. Be aware this is a fast-drying sealer, be prepared to work quickly. 4. Tool or brush to desired appearance. 5. Wait to dry before applying paint over the sealer. Thicker applications of seam sealer will take longer to cure before painting. Stated dry time is for 1/8 inch thickness. Applications A multipurpose, fast-drying seam sealer that is easily applied with a brush. Duplicates OEM appearance in areas where a brushed seam sealer was originally used. A typical application would be seams in the engine compartment since it is resistant to fuel and oil. NOTE: This product is not desirable anywhere inside the passenger compartment of the vehicle since it contains a solvent, which if not allowed to fully dry, can leave a strong smell in the vehicle. If a brushable sealer is needed in the passenger compartment or inside the trunk, a better selection would be a one part, moisture cure, urethane product such as PN 08360, 08361, 08364 or a two part product such as PN 08308 or 08310. Storage and Handling Store at room temperature. Rotate stock on a “first-in, first-out” basis. When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 12 months. Always use in a well-ventilated area. - 2 -

3M™ Brushable Seam Sealer Gray 08656 Precautionary Information Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOC’s) vary by state, and in some cases by locality. For surface preparation and clean- up activities, consult federal, state and local regulations regarding use of products containing VOCs in your area. Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty, Limited Remedy, and Disclaimer Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential , regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Automotive Aftermarket Division 3M Center, Building 223-6N-01 St. Paul, MN 55144-1000 www.3MCollision.com This is the last page 3M is a trademark of 3M Company. Printed in U.S.A. ©3M 2017 P.N. 08656 (7/17)