08641 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Typical Physical Properties Container Base Accelerator Density lbs/Gallon (Appx.) 9.80 9.86 Color Milky White Black Solids Content (Appx.) 100% 100% Work Life Through Dispenser Nozzle 4-5 Minutes Product Uses Performance Properties
Handling and Application Information Directions for Use Follow the instructions for assembly and use of the Automix Application P.N. 08190 and the Mixing Nozzle P.N. 08197. To obtain the best bonding and durability of assemblies, all of the surfaces need to be thoroughly clean. It is recommended that all glass be cleaned with 3M TM Glass Cleaner P.N. 08968. Metal can be cleaned with a solvent such as 3M TM General Purpose Adhesive Cleaner P.N. 08984*. When bonding channel glass it is recommended that enough adhesive is applied so a small amount of adhesive squeeze-out occurs.
When replacing stationary side/quarter glass check the current Auto Glass Journal-Auto Glass Installation Guide or the current Auto Manufacturer's Body Guide for the model being worked on. Determine the factory method of installation used, i.e. butyl tape and/or urethane sealer/adhesive. If buytl tape was used, follow recommended procedure for installing with butyl tape. If a urethane sealer/adhesive was used follow installation procedure using Automix TM Channel Bonding and Sidelite Adhesive in place of other type adhesives. Make sure glass and metal are clean. Apply adhesive as needed, fit glass and fixture as needed. Because of the fast cure rate of AutomixTM Channel Bonding and Sidelite Adhesive the car can be moved, other work finished i.e., trip/paint or put into service in approximately one (1) hour. If all of the Automix Channel Bonding and Sidelite Adhesive Duo-Pak was not used for the job, remove nozzle, replace end on duo-pak and save for next job. Cleanup: Excess adhesive and equipment may be cleaned prior to curing with a solvent* such as 3M TM General Purpose Adhesive Cleaner*. *NOTE: When using flammable solvents, extinguish all sources of ignition in the immediate work area and observe proper precautionary measures for handling such materials.
Applications
Stationary side glass that was factory assembled with a urethane adhesive/sealer, that needs to be removed and/or replaced, use Automix Channel Bonding and Sidelite Adhesive to give a cured, serviceable assembly in approximately one (1) hour compared to hours or even days for one-part sealers/adhesives and because of the black color the O.E.M. appearance is maintained. Storage and Handling Store at room temperature. Rotate stock on a "first-in-first-out" basis. When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 12 months. Precautionary Information Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this product . Country US This document is public. It may be distributed. Important Notice to Purchaser The statements and technical information contained in this technical data sheet are based on tests and data which 3M believes to be reliable, but the accuracy or completeness of such statements and technical information is not guaranteed. 3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of application. * If 'Directions for Use' reference P.N.'s 8984, 8986, or 8987, please read below. Federal and local air quality regulations may regulate or prohibit the use of surface preparation and cleanup solvents based on VOC content. Consult your local and Federal air quality regulations for information. When using solvents, use in a well ventilated area. Extinguish all sources of ignition in the work area and observe precautionary measures for handling these materials. Refer
to product label and MSDS for P.N. 8984, 8986, or 8987 for detailed precautionary information. LIMITATION OF REMEDIES AND LIABILITY: If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M'S OPTION, SHALL BE TO REFUND THE PURCHASE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including negligence, warranty, or strict liability. For Additional Health and Safety Information See Material Safety Data Sheet (Fax on Demand 1-800-305-0419), or call:3M Automotive Aftermarket Division3M Center, Building 223-6N-01 Phone: 877-MMM-CARS (877-666-2277) 3M Fax on Demand Identification Number Reference : Goto Ref Author : Karen A. Licht/US-Corporate/3M/US Tonya L. Frisle/IM-IndMktsGp/3M/US This is the last page