0805

X5R YAGEO | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 21

Technical content

General purpose & High capacitance Class 2, X5R

4 V TO 50 V

100 pF to 220 µF RoHS compliant & Halogen free Product Specification – December 06, 2022 V.30

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification SCOPE This specification describes X5R series chip capacitors with lead - free terminations.

APPLICATIONS

PCs, Hard disk, Game PCs Power supplies DVD players Mobile phones Data processing

FEATURES

Nickel -barrier end termination RoHS compliant Halogen free compliant ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP CTC & 12NC All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) CC XXXX X X X5R X BB XXX (1) SIZE – INCH BASED (METRIC) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) (2) TOLERANCE K = ± 10% M = ± 20% (3) PACKING STYLE R = Paper/PE taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper/PE taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch C = Bulk case (4) RATED VOLTAGE 4 = 4 V 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 103 = 10 x 103 = 10,000 pF = 10 nF

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification TYPE L1 (mm) W (mm) T (mm) L2 / L3 (mm) L4 (mm) DIMENSION CODE min. max. min. 0201 0402 0603 1206 1210 Table 1 For outlines see fig. 2 DIMENSION OOUUTTLLIINNEESS For dimension see Table 1 Fig. 2 Surface mount multilayer ceramic capacitor dimension MBB211 T L2 L3 W CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminat ions and finally covered with a layer of plated tin (NiSn). The terminations are lead -free. A cross section of the structure is shown in Fig.1. Fig. 1 Surface mount multilayer ceramic capacitor construction MLB457 terminations electrodes ceramic material

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification CAPACITANCE RANGE & THICKNESS FOR X5R CAP. 0201 0402 4 V 6.3 V 10 V 16 V 25 V 50 V 4 V 6.3 V 10 V 16 V 25 V 50 V 100 pF BA BA BA BA BA 150 pF BA BA BA BA BA 220 pF BA BA BA BA BA 330 pF BA BA BA BA BA 470 pF BA BA BA BA BA 680 pF BA BA BA BA BA 1.0 nF BA BA BA BA BA 1.5 nF BA BA BA BA 2.2 nF BA BA BA BA 3.3 nF BA BA BA BA 4.7 nF BA BA BA BA 6.8 nF BA BA BA BA 10 nF BA BA BA BA 15 nF BA BA BA NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request DIMENSION TYPE L1 (mm) W (mm) T (mm) L2 / L3 (mm) L4 (mm) DIMENSION CODE min. max. min. 0201 0402 Table 2 Sizes from 0201 to 0402 Table 3

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification CAPACITANCE RANGE & THICKNESS FOR X5R CAP. 0201 0402 4 V 6.3 V 10 V 16 V 25 V 50 V 4 V 6.3 V 10 V 16 V 25 V 50 V 22 nF BA BA BA BA CA CA CA CA CA 33 nF BA BA BA BA CA CA CA CA CA 47 nF BA BA BA BA CA CA CA CA CA 68 nF BA BA BA CA CA CA CA CA 100 nF BA BA BA BA CA CA CA CA CA 150 nF CA CA CA CA CA 220 nF BA BA BA BA BA CA CA CA CA CA 330 nF BA BC BC CA CA CA CA CA 470 nF BA BA BC BC CA CA CB CB CB 680 nF CA CA CA CA 1.0 µF BB BB BB BC CA CA CA CA CD 2.2 µF BC BC BC CA CA CA CD CD 4.7 µF BD CC CC CC CC 10 µF CD CD CD 22 µF CD CD NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request DIMENSION TYPE L1 (mm) W (mm) T (mm) L2 / L3 (mm) L4 (mm) DIMENSION CODE min. max. min. 0201 0402 Table 4 Sizes from 0201 to 0402 Table 5

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification CAP. 0603 0805 4V 6.3 V 10 V 16 V 25 V 50V 4V 6.3 V 10 V 16 V 25 V 50V 10 nF 15 nF 22 nF 33 nF 47nF 68 nF 100 nF 150 nF 220 nF DA DA DA DA DA 330 nF DA DA DA DA DA 470 nF DA DA DA DA DA EA EB EA EB EA EB EB EB 680 nF DA DA DA DA DA EA EB EA EB EA EB EB EB 1.0 µF DA DA DA DA DA EA EB EA EB EA EB EB EB 2.2 µF DA DA DA DB DC EA EB EA EB EA EB EA EB EB 4.7 µF DA DA DB DB EA EB EA EB EB EB EB 10 µF DB DC DC DC EA EB EA EB EA EB EB 22 µF DC DC EB EB EB EB 47 µF DC DC EB EB 100 µF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request DIMENSION TYPE L1 (mm) W (mm) T (mm) L2 / L3 (mm) L4 (mm) DIMENSION CODE min. max. min. 0603 Table 6 Sizes from 0603 to 0805 CAPACITANCE RANGE & THICKNESS FOR X5R Table 7

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification CAPACITANCE RANGE & THICKNESS FOR X5R CAP. 1206 1210 6.3 V 10 V 16 V 25 V 50V 6.3 V 10 V 16 V 25 V 50V 10 nF 15 nF 22 nF 33 nF 47nF 68 nF 100 nF 150 nF 220 nF 330 nF 470 nF 680 nF 1.0 µF FA FA FA FA FC GA GA GA GA GA 2.2 µF FA FA FA FA FC GB GB GB GB GB 4.7 µF FC FC FC FC FC GB GB GB GB GC 10 µF FC FC FC FC FD GB GB GB GB GD 22 µF FC FC FC FD GC GC GC GD 47 µF FC FC FD GC GC GC 100 µF FD GD GD GD 220 µF GD NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request DIMENSION TYPE L1 (mm) W (mm) T (mm) L2 / L3 (mm) L4 (mm) DIMENSION CODE min. max. min. 1206 1210 Table 9 Table 8 Sizes from 1206 to 1210

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification Table 10 THICKNESS CLASSES AND PACKING QUANTITY SIZE CODE THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL Ø 180 MM / 7 INCH Ø 330 MM / 13 INCH QUANTITY PER BULK CASE Paper Blister Paper Blister 0402 0.5 ± 0.05 / 0.1 mm 8 mm 10,000 --- 50,000 --- 50,000 0603 0.8 ± 0.1 / 0.2 mm 8 mm 4,000 --- 15,000 --- 15,000 0805 0.85 ± 0.1 mm 8 mm 4,000 --- 15,000 --- 8,000 1206 1210 1,000 --- --- --- 500 --- --- ---

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification DESCRIPTION VALUE Capacitance range 100 pF to 220 µF Capacitance tolerance ± 10% and ± 20% Dissipation factor (D.F.) X5R 0201 0402 0603 0805 1206 1210 D.F. ≤ 6.3V 100pF to 10nF 22nF to 100nF 220nF to 470nF 470nF to 680nF 1uF to 4.7uF 1uF to 10uF ≤ 5% 680nF to 1uF ≤ 7% 12nF to 1uF 120nF to 10uF 2.2uF to 47uF 1uF to 47uF 10uF to 47uF 22uF to 220uF ≤ 10% 2.2uF 100uF ≤ 15% 4.7uF 22uF ≤ 20% 10V 100pF to 10nF 22nF to 100nF 220nF to 470nF 470nF to 680nF 1uF to 4.7uF 1uF to 4.7uF ≤ 5% 680nF to 1uF 1uF ≤ 7% 12nF to 220nF, 1uF 120nF to 10uF 2.2uF to 22uF 2.2uF to 47uF 10uF to 47uF 10uF to 100uF ≤ 10% 470nF ≤ 15% 2.2uF ≤ 20% 16V 100pF to 10nF 22nF to 100nF 220nF to 470nF 470nF to 680nF 1uF to 4.7uF 1uF to 4.7uF ≤ 5% 680nF to 1uF 1 uF to 2.2uF ≤ 7% 12nF to 220nF 120nF to 4.7uF 2.2uF to 10uF 4.7uF to 22uF 10uF to 22uF 10uF to 100uF ≤ 10% 470nF ≤ 15% 25V 100pF to 470pF 22nF 470nF to 1uF 1uF to 2.2uF 1uF to 4.7uF ≤ 3.5% 560pF to 10nF 27nF to 100nF 220nF to 470nF 2.2uF 4.7uF 10uF ≤ 5% 680nF to 1uF ≤ 7% 22nF to 220nF 120nF to 2.2uF 2.2uF to 10uF 4.7uF to 22uF 10uF to 22uF 22uF ≤ 10% 50V 100pF to 1nF 22nF ≤ 3.5% 27nF to 100nF ≤ 5% 120nF to 1uF 220nF to 2.2uF 470nF to 4.7uF 1uF to 10uF 1uF to 10uF ≤ 10% Insulation resistance after 1 minute at Ur (DC) Rins ≥ 10 GΩ or Rins × Cr ≥ 50/100/500* seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): ± 15% Operating temperature range: –55 °C to +85 °C Table 11

ELECTRICAL CHARACTERISTICS

XX55RR DDIIEELLEECCTTRRIICC CCAAPPAACCIITTOORRSS;; NNIISSNN TTEERRMMIINNAATTIIOONNSS Unless otherwise specified, all test s and measurements shall be made under standard atmospheric conditions for testing as given in 5.3 of IEC 60068 -1: - Temperature: 15 °C to 35 °C - Relative humidity: 25% to 75% - Air pressure: 86 kPa to 106 kPa Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time sufficient to allow the entire capacitor to reach this temperature. The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification X5R 0201 0402 0603 0805 1206 1210 I.R. ≤ 6.3V 100pF to 82nF 22nF to 470nF 220nF to 1uF 470nF to 4.7uF 1uF to 2.2uF 1uF to 4.7uF Rins ≥ 10 GΩ or Rins × Cr ≥ 500Ω.F 10uF 10uF to 22uF 22uF to 47uF 100uF Rins × Cr ≥ 50Ω.F 2.2uF to 4.7uF 22uF 47uF Rins × Cr ≥ 20Ω.F 10V 100pF to 82nF 22nF to 470nF 220nF to 1uF 470nF to 2.2uF 1uF to 2.2uF 1uF to 4.7uF Rins ≥ 10 GΩ or Rins × Cr ≥ 500Ω.F 560nF to 2.2uF 10uF 10uF to 22uF 47uF Rins × Cr ≥ 50Ω.F 16V 100pF to 10nF 22nF to 150nF 220nF to 1uF 470nF to 2.2uF 1uF to 2.2uF 1uF to 4.7uF Rins ≥ 10 GΩ or Rins × Cr ≥ 500Ω.F 22nF to 100nF, 220nF 220nF to 4.7uF 10uF 22uF Rins × Cr ≥ 50Ω.F 25V 100pF to 10nF 22nF to 150nF 220nF to 1uF 470nF to 2.2uF 1uF to 2.2uF 1uF to 2.2uF Rins ≥ 10 GΩ or Rins × Cr ≥ 500Ω.F 220nF 220nF to 2.2uF 10uF 10uF, 22uF Rins × Cr ≥ 50Ω.F 50V 100pF to 1nF 22nF to 100nF 470nF to 2.2uF 1uF to 2.2uF 1uF to 2.2uF Rins ≥ 10 GΩ or Rins × Cr ≥ 500Ω.F 150nF to 1uF 10uF Rins × Cr ≥ 50Ω.F Fig. 3 Typical capacitance change as a function of temperature YNM0021 60 -10 15 6540 90 T (oC) C (%)

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0201 10 nF / 16 V Solid lines: Impedance / Dotted lines: ESR 0.00 100.00 YNM0024 0.01 0.10 1.00 10.00 f (MHz) Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0603 1 µF / 10 V Solid lines: Impedance / Dotted lines: ESR 0.00 100.00 YNM0025 0.01 0.10 1.00 10.00 f (MHz)

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0805 10 µF / 6.3 V Solid lines: Impedance / Dotted lines: ESR 0.00 100.00 YNM0028 0.01 0.10 1.00 10.00 f (MHz) Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 1206 10 µF / 16 V Solid lines: Impedance / Dotted lines: ESR 0.00 100.00 YNM0027 0.01 0.10 1.00 10.00 f (MHz)

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 1210 10 µF / 25 V Solid lines: Impedance / Dotted lines: ESR 0.00 100.00 YNM0028 0.01 0.10 1.00 10.00 f (MHz) SOLDERING RECOMMENDATION Table 12 SOLDERING METHOD SIZE 0201 0402 0603 0805 1206 ≥ 1210 Reflow Reflow only > 100 nF > 1µF > 2.2 µF > 2.2 µF Reflow only Reflow/Wave ≤ 100 nF ≤ 1µF ≤ 2.2 µF ≤ 2.2 µF ---

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification TESTS AND REQUIREMENTS Table 13 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 60384-

4.3 The capacitors may be mounted on printed-circuit boards or

4.4 Any applicable method using × 10 magnification In accordance with specification

Capacitance (1) Dissipation Factor (D.F.) (1) 4.5.1 4.5.2 Class 2: At 20 °C, 24 hrs after annealing Cap ≤ 1 µF, f = 1 KHz, measuring at voltage 1 Vrms at 20 °C Cap > 1uF, f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at voltage 1 Vrms at 20 °C f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at voltage 0.5 Vrms at 20 °C f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C Within specified tolerance Insulation Resistance

4.5.3 At Ur (DC) for 1 minute In accordance with specification

1. The figure indicates typical inspection. Please refer to individual specifications.

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Characteristic

4.6 Capacitance shall be measured by the steps shown in the

following table. The capacitance change should be measured after 5 min at each specified temperature stage. Step Temperature(°C) a 25± 2 b Lower temperature± 3°C c 25± 2 d Upper Temperature± 2°C e 25± 2 (1) Class I Temperature Coefficient shall be calculated from the formula as below Temp, Coefficient = 610T xC1 C1-C2 Δ [ppm/°C] C1: Capacitance at step c C2: Capacitance at 125°C (2) Class II Capacitance Change shall be calculated from the formula as below ∆C = C1-C2 x 100% C1: Capacitance at step c C2: Capacitance at step b or d <General purpose series> Class1: ∆ C/C: ± 30ppm Class2: X7R: ∆ C/C: ±15% <High Capacitance series> Class2: X7R/X5R: ∆ C/C: ±15% Adhesion 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Force size ≥ 0603: 5N size = 0402: 2.5N size = 0201: 1N Bending Strength IEC 60384- 4.8 Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 5 mm Test Substrate: Unit: mm ∆C/C Class2: <General purpose series> X5R: ± 10% <High Capacitance series> X5R: ± 12.5% Dimension(mm) Type a b c 0201 0.3 0.9 0.3 0402 0.4 1.5 0.5 0603 1.0 3.0 1.2 0805 1.2 4.0 1.65 1206 2.2 5.0 1.65 1210 2.2 5.0 2.0 100 b C a 4.5 YNSC147

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification TEST TEST METHOD PROCEDURE REQUIREMENTS Resistance to Soldering Heat 4.9 Precondition: 150 +0/–10 °C for 1 hour, then keep for 24 ± 1 hours at room temperature Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute Preheating: for size >1206: 100 °C to 120 °C for 1 minute and 170 °C to 200 °C for 1 minute Solder bath temperature: 260 ± 5 °C Dipping time: 10 ± 0.5 seconds Recovery time: 24 ±2 hours Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned <General purpose series> ∆C/C Class2: X5R: ± 10% <High Capacitance series> ∆C/C Class2: X5R: ± 10% D.F. within initial specified value Rins within initial specified value Solderability 4.10 Preheated the temperature of 80 °C to 140 °C and maintained for 30 seconds to 60 seconds. 1. Temperature: 235± 5°C / Dipping time: 2 ± 0.5 s 2. Temperature: 245± 5°C / Dipping time: 3 ± 0.5 s (lead free) Depth of immersion: 10mm The solder should cover over 95% of the critical area of each termination Rapid Change of Temperature IEC 60384-

4.11 Preconditioning;

150 +0/–10 °C for 1 hour, then keep for 24 ± 1 hours at room temperature 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Recovery time 24 ± 2 hours No visual damage <General purpose series> ∆C/C Class2: X5R: ± 15% <High Capacitance series> ∆C/C Class2: X5R: ± 15% D.F. meet initial specified value Rins meet initial specified value Voltage Proof IEC 60384-1 4.6 1. Specified stress voltage applied for 1~5 seconds 2. Ur ≤ 100 V: series applied 2.5 Ur 3. 100 V < Ur ≤ 200 V series applied (1.5 Ur + 100) 4. 200 V < Ur ≤ 500 V series applied (1.3 Ur + 100) Charge/Discharge current is less than 50 mA No breakdown or flashover

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification TEST TEST METHOD PROCEDURE REQUIREMENTS Damp Heat with Ur Load 4.13 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ± 1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Damp heat test: 500 ± 12 hours at 40 ±2 °C; 90 to 95% R.H. 1.0 Ur applied 4. Recovery: Class 2: 24 ± 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to “IEC 60384 4.1” and then the requirements shall be met. No visual damage after recovery <General purpose series> ∆C/C Class2: X5R: ± 15% D.F. Class2: X5R: ≤ 16V: ≤ 7% or 2 x initial value whichever is greater ≥ 25V: ≤ 5% or 2 x initial value whichever is greater Rins Class2: X5R: ≥ 500 MΩ or Rins x Cr ≥ 25s whichever is less <High Capacitance series> ∆C/C Class2: X5R: ± 20% D.F. Class2: X5R: 2 x initial value max Rins Class2: Rins x Cr ≥ 5s whichever is less X5R 0201 0402 0603 0805 1206 1210 Product Type ≤ 6.3V 100pF to 82nF 22nF to 820nF 220nF to 1uF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF General Purpose 10V 100pF to 82nF 22nF to 820nF 220nF to 1uF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF General Purpose 16V 100pF to 82nF 22nF to 820nF 220nF to 1uF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF General Purpose 25V 100pF to 82nF 22nF to 220nF 220nF to 1uF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF General Purpose 50V 100pF to 82nF 22nF to 100nF 220nF to 820nF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF General Purpose 100nF 220nF to 1uF 1uF, 2.2uF 4.7uF 4.7uF, 10uF 4.7uF, 10uF High Capacitance

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification TEST TEST METHOD PROCEDURE REQUIREMENTS Endurance IEC 60384- 4.14 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ± 1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Endurance test: Temperature: X5R: 85 °C Specified stress voltage applied (2.0/1.5/1.0 x Ur) for 1,000 hours 4. Recovery time: 24 ± 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to “IEC 60384 4.1” and then the requirements shall be met. No visual damage <General purpose series - 2.0 x Ur> ∆C/C Class2: X5R: ± 15% D.F. Class2: X5R: ≤ 16V: ≤ 7% or 2 x initial value whichever is greater ≥ 25V: ≤ 5% or 2 x initial value whichever is greater Rins Class2: X5R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s whichever is less <High Capacitance series - 1.0/1.5 x Ur> ∆C/C Class 2: X5R: ± 20% D.F. Class 2: X5R: 2 x initial value max Rins Class 2: Rins x Cr ≥ 10s whichever is less X5R 0201 0402 0603 0805 1206 1210 Test voltage ≤ 6.3V 100pF to 82nF 22nF to 820nF 220nF to 1uF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF 200% x Rated voltage 470nF to 4.7uF 4.7uF to 22uF 22uF, 47uF 47uF 100% x Rated voltage 10V 100pF to 82nF 22nF to 820nF 220nF to 1uF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF 200% x Rated voltage 1uF*, 2.2uF 4.7uF, 10uF 10uF, 22uF 22uF, 47uF 100% x Rated voltage 16V 100pF to 82nF 22nF to 820nF 220nF to 1uF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF 200% x Rated voltage 4.7uF 10uF 22uF 100% x Rated voltage 25V 100pF to 82nF 22nF to 220nF 220nF to 1uF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF 200% x Rated voltage 100nF 4.7uF, 10uF 10uF, 22uF 100% x Rated voltage 50V 100pF to 82nF 22nF to 100nF 220nF to 820nF 470nF to 2.2uF 1uF, 2.2uF 1uF, 2.2uF 200% x Rated voltage 220nF, 1uF 1uF, 2.2uF 4.7uF 4.7uF 4.7uF, 10uF 150% x Rated voltage 100nF 470nF 10uF 100% x Rated voltage * thickness BC for 150% x Rated Voltage, BB for 100% x Rated Voltage.

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R Surface Mount Multilayer Ceramic Capacitors Product specification

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 30 Dec. 06, 2022 - - 0201/560nF to 1uF/ 6.3V I.R. updated Version 27 Sep. 17, 2021 - - Modify 0402 L4 spec Version 26 Mar. 26, 2020 - - Capacitance range updated for 0201/0805/1206, 0201 D.F spec update, 1210 dimension update Version 25 Jun. 2, 2017 - - I.R spec updated Version 24 Mar. 6, 2017 - - 0805 L4 spec updated Version 23 Nov. 15, 2016 - - Dimension updated Version 22 Oct. 3, 2016 - - Dimension and Soldering recommendation updated Version 21 Jan. 28, 2016 - - Tests and requirements updated Version 20 Dec. 04, 2015 - - Size updated Version 19 Apr. 09, 2015 - - Voltage updated Version 18 Jul. 07, 2014 - - Voltage updated Version 17 Mar. 31, 2014 - - Test condition updated Version 16 Nov. 29, 2012 - - Test condition updated Version 15 Sep. 03, 2012 - - Test condition updated Version 14 May 16, 2012 - - Product range updated Version 13 May 02, 2012 - - Product range updated Version 12 Feb 10, 2012 - - Product range updated Version 11 Oct 21, 2011 - - Product range updated Version 10 Jun 21, 2011 - - Product range updated Version 9 Mar 23, 2011 - - Product range updated Version 8 Jan 25, 2011 - - Rated voltage of 0201 extend to 50V Version 7 Jan 05, 2011 - - Product range updated Version 6 Jul 27, 2010 - - Dimension on 0603 and 1206 case size updated Version 5 Apr 21, 2010 - - The statement of "Halogen free" on the cover added - Dimension updated Version 4 Jan 13, 2010 - - Thickness updated Version 3 Aug 17, 2009 - - Dimension updated Version 2 Jun 09, 2009 - - Ordering code updated

www.yageo.com Dec. 06, 2022 V.30 General Purpose & High Cap. X5R

4 V to 50 V Surface Mount Multilayer Ceramic Capacitors

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 1 May 15, 2009 - - Product range updated Version 0 Apr 15, 2009 - - New datasheet for general purpose and high capacitance X5R series with RoHS compliant - Replace the "6.3V to 50V" part of pdf files: UP-X5R_X7R_HighCaps_6.3- to-25V_11, UY-X5R_X7R_HighCaps_6.3-to-25V_11 - Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2 and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2 - Define global part number - Description of "Halogen free compliant" added - Test method and procedure updated

www.yageo.com Surface-Mount Ceramic Multilayer Capacitors Product specification LEGAL DISCLAIMER YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements t o product related information at any time and without notice. YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum exten t permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied w arranties, including warranties of fitness for a particular purpose, non -infringement and merchantability. YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the application s listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy -related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data -processing equipment , Medical devices, Military equipment, Power generation co ntrol equipment, Safety equipment, Traffic signal equipment, Transportation equipment and Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. P articularly YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight. Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.