Logic IC

080-0014

Laird Tech Smart Techno...

Integrated Transceiver Modules for ZigBee / 802.15.4 (2.4 GHz)

Manufacturer: Laird Tech Smart Techno...

Document: 46 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

More from Laird Tech Smart Techno... Browse 0-9 parts

Online Datasheet

Read 080-0014 online.

450-0075 LSTD | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 46

Technical content

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 1 of 46 Integrated Transceiver Modules for ZigBee / 802.15.4 (2.4 GHz) Development Kit Available

FEATURES

100mW output power
Long range: 4000 feet
Miniature footprint: 0.9” x 1.63”
Integrated PCB F antenna or U.FL connector for external antenna
Worldwide acceptance: FCC, IC and CE
Powerful Texas Instruments 256k MSP430 with 802.15.4 MAC or ZigBee Stack
LSR serial interface based on 802.15.4 MAC
Low power operation
RoHS compliant
Streamlined development with LSR design services.
License options available to purchase design or integrate design.

APPLICATIONS

Security and Lighting Control
HVAC Control
Sensor Networks
Medical
Smart Energy

DESCRIPTION

The ProFLEX01-R2 module is a high performance 2.4GHz IEEE 802.15.4 radio (CC2520 & CC2591) and microcontroller (MSP430F5437A) in a cost effective, pre- certified footprint. The module comes preloaded with the TI MAC-Stack that can be used with the LSR host serial interface. Full debug and programming capabilities are included to develop custom applications. Easily load the TI ZigBee stack or MAC onto the module and create your own network. Need to get to market quickly? Not an expert in 802.15.4 or ZigBee? Need a custom antenna? Would you like to own the design? Would you like a custom design? Not quite sure what you need? Do you need help with your host board? LSR Design Services will be happy to develop custom hardware or software, integrate the design, or license the design so you can manufacture yourself. Contact us at sales@lsr.com or call us at 262-375-4400.

ORDERING INFORMATION

450-0075 ProFLEX01-R2 Module with PCB F antenna (Tray) SPQ = 25 450-0076 ProFLEX01-R2 Module with U.FL connector for external antenna (Tray) SPQ = 250 450-0004 ProFLEX01-R2 Development Kit with F antenna Table 1 Orderable ProFLEX01-R2 Model Numbers

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 2 of 46 MODULE ACCESSORIES Order Number Description 001-0001 2.4 GHz Dipole Antenna with Reverse Polarity SMA Connector 001-0010 2.4 GHz Waterproof Dipole Antenna with Reverse Polarity SMA Connector 080-0001 U.FL to Reverse Polarity SMA Bulkhead Cable 105mm 080-0013 Waterproof U.FL to Reverse Polarity SMA Bulkhead Cable, O-Ring Seal, 105mm 080-0014 Waterproof U.FL to Reverse Polarity SMA Bulkhead Cable, O-Ring Seal, 210mm

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 6 of 46 MODULE PINOUT AND PIN DESCRIPTIONS MCU# GND 1 Texas Instruments MSP430F5437A

69 GND MCU#

GND 2 68 GND - - GND 3 67 GND - - NC 4 66 NC - - NC 5 65 NC - - NC 6 64 NC - - NC 7 63 NC - - NC 8 62 NC - 74 JTAG TMS 9 61 P5.6 56 73 JTAG TDI 10 60 P5.7 57 75 JTAG TCK 11 59 P3.6 41 72 JTAG TDO 12 58 P5.5 55 71 TEST 13 57 P3.7 42 76 nRESET 14 56 P5.4 54 9 P5.0 15 55 P2.4 29 10 P5.1 16 54 P2.3 28 77 P6.0 17 53 P2.2 27 78 P6.1 18 52 P2.1 26 79 P6.2 19 51 P2.0 25 80 P6.3 20 50 P1.1 18 1 P6.4 21 49 P1.0 17 2 P6.5 22 48 P7.7 8 3 P6.6 23 47 P1.2 19 4 P6.7 24 46 P8.0 60 5 P7.4 25 45 P8.1 61 - VCC - 3V3DC 26 44 GND - 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 P4.7 P4.6 P4.5 P4.4 P4.3 P4.2 P4.1 P4.0 P3.4/UART TX P3.5/UART RX P7.2/CTS P7.3 P8.6 P8.5 P8.4 P8.3 P8.2 MCU# 53 52 48 47 46 45 44 43 39 40 58 59 66 65 64 63 62 MCU# Figure 3 Module Pinout

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 7 of 46 Module Pin Name MCU Pin Type Description

1 GND N/A GND Ground

2 GND N/A GND Ground

3 GND N/A GND Ground

4 NC N/A NC No Connect

5 NC N/A NC No Connect

6 NC N/A NC No Connect

7 NC N/A NC No Connect

8 NC N/A NC No Connect

9 JTAG TMS 74 I/O General-purpose digital I/O

10 JTAG TDI 73 I/O General-purpose digital I/O

Test data input or test clock input

11 JTAG TCK 75 I/O General-purpose digital I/O

12 JTAG TDO 72 I/O General-purpose digital I/O

13 TEST 71 I Test mode pin – select digital I/O on JTAG pins

Non-maskable interrupt input Spy-bi-wire data input/output 15 P5.0 9 I/O General-purpose digital I/O Output of reference voltage to the ADC Input for an external reference voltage to the ADC 16 P5.1 10 I/O General-purpose digital I/O Negative terminal for the ADC's reference voltage for both sources, the internal reference voltage, or an external applied reference voltage 17 P6.0 77 I/O General-purpose digital I/O Analog input 18 P6.1 78 I/O General-purpose digital I/O Analog input 19 P6.2 79 I/O General-purpose digital I/O Analog input 20 P6.3 80 I/O General-purpose digital I/O Analog input 21 P6.4 1 I/O General-purpose digital I/O Analog input

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 8 of 46 Module Pin Name MCU Pin Type Description 22 P6.5 2 I/O General-purpose digital I/O Analog input 23 P6.6 3 I/O General-purpose digital I/O Analog input 24 P6.7 4 I/O General-purpose digital I/O Analog input 25 P7.4 5 I/O General-purpose digital I/O Analog input

26 VCC - 3V3DC VCC VCC Supply Voltage

27 P4.7 53 I/O General-purpose digital I/O Timer_B7 clock input SMCLK output 28 P4.6 52 I/O General-purpose digital I/O Timer_B7 capture CCR6: CCI6A/CCI6B input, compare: Out6 output 29 P4.5 48 I/O General-purpose digital I/O Timer_B7 capture CCR5: CCI5A/CCI5B input, compare: Out5 output 30 P4.4 47 I/O General-purpose digital I/O Timer_B7 capture CCR4: CCI4A/CCI4B input, compare: Out4 output 31 P4.3 46 I/O General-purpose digital I/O Timer_B7 capture CCR3: CCI3A/CCI3B input, compare: Out3 output 32 P4.2 45 I/O General-purpose digital I/O Timer_B7 capture CCR2: CCI2A/CCI2B input, compare: Out2 output 33 P4.1 44 I/O General-purpose digital I/O Timer_B7 capture CCR1: CCI1A/CCI1B input, compare: Out1 output 34 P4.0 43 I/O General-purpose digital I/O Timer_B7 capture CCR0: CCI0A/CCI0B input, compare: Out0 output 35 P3.4/UART TX 39 I/O General-purpose digital I/O Transmit data – USCI_A0 UART mode Slave in, master out – USCI_A0 SPI mode 36 P3.5/UART RX 40 I/O General-purpose digital I/O Receive data – USCI_A0 UART mode Slave out, master in – USCI_A0 SPI mode 37 P7.2 58 I/O General-purpose digital I/O Switch all PWM outputs high impedance – Timer_B SVM output 38 P7.3 59 I/O General-purpose digital I/O Timer1_A3 CCR2 capture: CCI2B input, compare: Out2 output 39 P8.6 66 I/O General-purpose digital I/O Timer1_A3 CCR1 capture: CCI1B input, compare: Out1 output

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 9 of 46 Module Pin Name MCU Pin Type Description 40 P8.5 65 I/O General-purpose digital I/O Timer1_A3 CCR0 capture: CCI0B input, compare: Out0 output 41 P8.4 64 I/O General-purpose digital I/O Timer0_A5 CCR4 capture: CCI4B input, compare: Out4 output 42 P8.3 63 I/O General-purpose digital I/O Timer0_A5 CCR3 capture: CCI3B input, compare: Out3 output 43 P8.2 62 I/O General-purpose digital I/O Timer0_A5 CCR2 capture: CCI2B input, compare: Out2 output

44 GND N/A GND Ground

45 P8.1 61 I/O General-purpose digital I/O Timer0_A5 CCR1 capture: CCI1B input, compare: Out1 output 46 P8.0 60 I/O General-purpose digital I/O Timer0_A5 CCR0 capture: CCI0B input, compare: Out0 output 47 P1.2 19 I/O General-purpose digital I/O with port interrupt TA0 CCR1 capture: CCI1A input, compare: Out1 output BSL receive input 48 P7.7 8 I/O General-purpose digital I/O Analog input 49 P1.0 17 I/O General-purpose digital I/O with port interrupt Timer0_A5 clock signal TACLK input ACLK output 50 P1.1 18 I/O General-purpose digital I/O with port interrupt Timer0_A5 CCR0 capture: CCI0A input, compare: Out0 output BSL transmit output 51 P2.0 25 I/O General-purpose digital I/O with port interrupt Timer1_A3 clock signal TA1CLK input MCLK output 52 P2.1 26 I/O General-purpose digital I/O with port interrupt Timer1_A3 CCR0 capture: CCI0A input, compare: Out0 output 53 P2.2 27 I/O General-purpose digital I/O with port interrupt Timer1_A3 CCR1 capture: CCI1A input, compare: Out1 output 54 P2.3 28 I/O General-purpose digital I/O with port interrupt Timer1_A3 CCR2 capture: CCI2A input, compare: Out2 output 55 P2.4 29 I/O General-purpose digital I/O with port interrupt RTCCLK output 56 P5.4 54 I/O General-purpose digital I/O Slave out, master in – USCI_B1 SPI mode I2C clock – USCI_B1 I2C mode

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 10 of 46 Module Pin Name MCU Pin Type Description 57 P3.7 42 I/O General-purpose digital I/O Slave in, master out – USCI_B1 SPI mode I2C data – USCI_B1 I2C mode 58 P5.5 55 I/O General-purpose digital I/O Clock signal input – USCI_B1 SPI slave mode Clock signal output – USCI_B1 SPI master mode Slave transmit enable – USCI_A1 SPI mode 59 P3.6 41 I/O General-purpose digital I/O Slave transmit enable – USCI_B1 SPI mode Clock signal input – USCI_A1 SPI slave mode Clock signal output – USCI_A1 SPI master mode 60 P5.7 57 I/O General-purpose digital I/O Receive data – USCI_A1 UART mode Slave out, master in – USCI_A1 SPI mode 61 P5.6 56 I/O General-purpose digital I/O Transmit data – USCI_A1 UART mode Slave in, master out – USCI_A1 SPI mode

62 NC N/A NC No Connect

63 NC N/A NC No Connect

64 NC N/A NC No Connect

65 NC N/A NC No Connect

66 NC N/A NC No Connect

67 GND N/A GND Ground

68 GND N/A GND Ground

69 GND N/A GND Ground

Table 2 ProFLEX01-R2 Module Pin Descriptions

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 12 of 46 Figure 5 MSP430F5437A Block Diagram Radio The CC2520 is TI's second generation ZigBee / IEEE 802.15.4 RF transceiver for the 2.4 GHz unlicensed ISM band. This chip enables industrial grade applications by offering state-of-the-art selectivity/co-existence, excellent link budget, operation up to 125°C and low voltage operation. In addition, the C2520 provides extensive hardware support for frame handling, data buffering, burst transmissions, data encryption, data authentication, clear channel assessment, link quality indication and frame timing information. These features reduce the load on the host controller. Figure 6 shows a block diagram of the CC2520.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 14 of 46 PA/LNA The CC2591 is a cost-effective and high performance RF Front End for low-power and low-voltage 2.4-GHz wireless applications. It is a range extender for all existing and future 2.4-GHz low-power RF transceivers, transmitters and System-on-Chip products from Texas Instruments. It increases the link budget by providing a power amplifier for increased output power, and a LNA with low noise figure for improved receiver sensitivity. It provides a small size, high output power RF design with its 4x4-mm QFN-16 package. It contains PA, LNA, switches, RF-matching, and balun for simple design of high performance wireless applications. Figure 7 shows a block diagram of the CC2591. Figure 7 CC2591 Block Diagram

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 15 of 46 Antenna Options The ProFLEX01-R2 module includes an integrated PCB F-antenna. An optional configuration with a U.FL connector is also available. The module regulatory certification has been completed with the following antennas:

PCB trace antenna
LSR 001-0001 2.4 GHz Dipole Antenna with Reverse Polarity SMA Connector and LSR 080 -0001 U.FL to Reverse Polarity SMA Bulkhead Cable 105mm
Nearson S131CL-6-PX-2450S dipole antenna on a 6 inch cable with connectors. An adequate ground plane is necessary to provide good efficiency. The ground plane of the host board on which the module is mounted increases the effective antenna ground plane size and improves the antenna performance. The environment the module is placed in will dictate the range performance. The non-ideal characteristics of the environment will result in the transmitted signal being reflected, diffracted, and scattered. All of these factors randomly combine to create extremely complex scenarios that will affect the link range in various ways. It is also best to keep some clearance between the antenna and nearby objects. This includes how the module is mounted in the product enclosure. Unless the items on the following list of recommendations are met, the radiation pattern can be heavily distorted. Whichever antennas are used, it is best to keep a few things in mind when determining their location.
Never place ground plane or copper trace routing underneath the antenna.
LSR recommends keeping metal objects as far away from the antenna as possible. At a very minimum keep the antennas at least 16mm from any metallic objects, components, or wiring. The farther the antenna is placed from these interferers, the less the radiation pattern and gain will be perturbed
Do not embed the antenna in a metallic or metalized plastic enclosure.
Try to keep any plastic enclosure greater than 1 cm from the antenna in any orientation.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 17 of 46 Software Stacks There are several software stacks provided by TI to streamline development, two of which are described below: MAC (802.15.4) Z-Stack (Zigbee) Overall Complexity and Development Effort Figure 10 ProFLEX01-R2 Compatible Stacks

802.15.4 MAC

Use for applications requiring point-to-point or star network topology.
Advantages: Quick learning curve, minimize software development, easy to deploy in the field
Disadvantages: No mesh networking

(To Tx/Rx RF data) Application Software (to control switches, LED’s, serial ports and so on) Software Interface Figure 11 ProFLEX01-R2 with 802.15.4 MAC TI Z-Stack (ZigBee)

Use when mesh networking is required.
Advantages: Covers a large area with a ZigBee network.
Disadvantages: Large learning curve, more software development, and complexity Application Software (to control switches, LED’s, serial ports and so on) Software Interface Z-Stack (ZigBee) (To Tx/Rx RF data) Figure 12 ProFLEX01-R2 with TI Z-Stack (ZigBee)

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 18 of 46 DEVELOPMENT TOOLS TI MSP-FET430UIF Custom firmware development can be done on the ProFLEX01-R2 module using development tools available thought TI. Shown in Figure 13, a MSP-FETUIF USB interface is required. It plugs directly into the ProFLEX01-R2 Development Board (see Figure 2), and can easily be adapted to other hardware. See the Texas Instruments website for more information. Figure 13 MSP-FET430UIF IAR Embedded Workbench for MSP430 Also required is Embedded Workbench for TI MSP430 from IAR Systems. IAR Embedded Workbench for MSP430 is an integrated development environment for building and debugging embedded applications. Visit the IAR Systems website for additional information.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 19 of 46 ELECTRICAL SPECIFICATIONS The majority of these characteristics are based on the use of the TI 802.15.4 MAC loaded with the generic application firmware written by LSR. Custom firmware may require these values to be re-characterized by the customer. Absolute Maximum Ratings Parameter Min Max Unit Power supply voltage (VCC) -0.2 +3.6 V Voltage on any GPIO -0.2 VCC + 0.2 V RF input power, antenna port +10 dBm RF input power, transmit port +8 dBm Operating temperature -40 +85 ºC Storage temperature -40 +105 ºC Table 3 Absolute Maximum Ratings1 Recommended Operating Conditions Parameter Min Typ Max Unit Power supply voltage (VCC) 2.0 3.3 Vdc Input frequency 2405 2480 MHz Ambient temperature range -40 25 85 ºC Table 4 Recommended Operating Conditions Module will NOT transmit, if VCC > 3.4V. 1 Under no circumstances should exceeding the ratings specified in the Absolute Maximum Ratings section be allowed. Stressing the module beyond these limits may result permanent damage to the module that is not covered by the warranty.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 20 of 46 General Characteristics Parameter Min Typ Max Unit RF frequency range 2405 2480 MHz RF data rate 250 kbps Host data rate 1.2 19.2 921.6 kbps Flash memory 256 kB RAM 16 kB Flash information memory 512 Bytes Table 5 General Characteristics Power Consumption Parameter Test Conditions Min Typ Max Unit Transmit mode 2440 MHz, 3.3V, +25°C, +20 dBm 125 149 175 mA Receive mode 2440 MHz, 3.3V, +25°C, -50 dBm input 25 30 35 mA Sleep mode 3 uA Table 6 Power Consumption DC Characteristics – General Purpose I/O Parameter Test Conditions Min Typ Max Unit Logic input low -0.2 20% VCC V Logic input high 80% VCC VCC + 0.2 V Logic output low (Full Drive) Iout = 5 mA VSS VSS + 0.25 V Iout = 15 mA VSS VSS + 0.60 V Logic output low (Reduced Drive) Iout = 2 mA VSS VSS + 0.25 V Iout = 6 mA VSS VSS + 0.60 V Logic output high (Full Drive) Iout = -5 mA VCC – 0.25 VCC V Iout = -15 mA VCC – 0.60 VCC V Logic output high (Reduced Drive) Iout = -2 mA VCC – 0.25 VCC V Iout = -6 mA VCC – 0.60 VCC V Table 7 DC Characteristics General Purpose I/O

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 21 of 46 RF Characteristics Transmitter Characteristics (TA =25°C, VCC=3.3 V, fc =2440 MHz) Parameter Test Conditions Min Typ Max Unit Nominal output power 100mW 18 20 21 dBm Programmable output power range 7 21 dB Error vector magnitude 12 35 % Table 8 Transmitter RF Characteristics LSR Host RF Power Value CC2520 TXPOWER Register Value Typical RF Output Power Typical Current Consumption 0x49 7 dBm 77 mA 0x79 12 dBm 92 mA 11 0x6C 16 dBm 105 mA 0xE0 18 dBm 122 mA 0xF9 20 dBm 149 mA 18 Table 9 RF Power Settings with LSR Host Software

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 22 of 46 Table 10 and Table 11 below list the nominal RF Power Limits per channel that must be maintained to assure compliance with FCC or ETSI. RF Channel Max LSR Host RF Power Value CC2520 TXPOWER Register Value RF Output Power 11 16 0xE0 18 dBm 12 16 0xE0 18 dBm 13 16 0xE0 18 dBm 14 19 0xF9 20 dBm 15 19 0xF9 20 dBm 16 19 0xF9 20 dBm 17 19 0xF9 20 dBm 18 19 0xF9 20 dBm 19 19 0xF9 20 dBm 20 19 0xF9 20 dBm 21 19 0xF9 20 dBm 22 19 0xF9 20 dBm 23 19 0xF9 20 dBm 24 19 0xF9 20 dBm 25 16 0xE0 18 dBm

26 Not used Not used Not used

Table 10 RF Transmit Output Power Limits for FCC Compliance (Internal or External Antenna) RF Channel Max LSR Host RF Power Value CC2520 TXPOWER Register Value RF Output Power

11 Not used Not used Not used

Table 11 RF Transmit Output Power Limits for ETSI Compliance (Internal or External Antenna)

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 23 of 46 Receiver Characteristics (TA =25°C, VCC=3.3 V, fc =2440 MHz) Parameter Test Conditions Min Typ Max Unit Receiver sensitivity (1% PER) HGM -95 -98 -99 dBm Saturation (maximum input level) (1% PER) HGM -13 dBm Interference rejection Desired signal at -82 dBm, 802.15.4 interferer ±5 MHz 51 dB ±10 MHz 56 dB ±20 MHz 57 dB Table 12 Receiver RF Characteristics For additional details regarding the electrical specifications, see the MSP430F5437A, CC2520, and CC2591 datasheets on the TI website.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 24 of 46 SOLDERING RECOMMENDATIONS Recommended Reflow Profile for Lead Free Solder Note: The quality of solder joints on the castellations (‘half vias’) where they contact the host board should meet the appropriate IPC Specification. See IPC -A-610-D Acceptability of Electronic Assemblies, section 8.2.4 Castellated Terminations.”

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 25 of 46 CLEANING In general, cleaning the populated modules is strongly discouraged. Residuals under the module cannot be easily removed with any cleaning process.

Cleaning with water can lead to capillary effects where water is absorbed into the gap between the host board and the module. The combination of soldering flux residuals and encapsulated water could lead to short circuits between neighboring pads. Water could also damage any stickers or labels.
Cleaning with alcohol or a similar organic solvent will likely flood soldering flux residuals into the RF shield, which is not accessible for post-washing inspection. The solvent could also damage any stickers or labels.
Ultrasonic cleaning could damage the module permanently. OPTICAL INSPECTION After soldering the Module to the host board, consider optical inspection to check the following:
Proper alignment and centering of the module over the pads.
Proper solder joints on all pads.
Excessive solder or contacts to neighboring pads, or vias. REWORK The module can be unsoldered from the host board if the Moisture Sensitivity Level (MSL) requirements are met as described in this datasheet. Never attempt a rework on the module itself, e.g. replacing individual components. Such actions will terminate warranty coverage. SHIPPING, HANDLING, AND STORAGE Shipping Bulk orders of the ProFLEX01-R2 modules are delivered in trays of 25. Handling The ProFLEX01-R2 modules contain a highly sensitive electronic circuitry. Handling without proper ESD protection may destroy or damage the module permanently. Moisture Sensitivity Level (MSL) Per J-STD-020, devices rated as MSL 4 and not stored in a sealed bag with desiccant pack should be baked prior to use. Devices are packaged in a Moisture Barrier Bag with a desiccant pack and Humidity Indicator Card (HIC). Devices that will be subjected to reflow should reference the HIC and J-STD-033 to determine if baking is required. If baking is required, refer to J-STD-033 for bake procedure. Storage Per J-STD-033, the shelf life of devices in a Moisture Barrier Bag is 12 months at <40ºC and <90% room humidity (RH). Do not store in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX. Do not store in direct sunlight. The product should not be subject to excessive mechanical shock.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 26 of 46 Repeating Reflow Soldering Only a single reflow soldering process is encouraged for host boards.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 27 of 46 AGENCY STATEMENTS Agency Certifications FCC ID: TFB-PROFLEX1 IC ID: 5969A-PROFLEX1 CE: Compliant to standards EN 60950-1, EN 300 328, and EN 301 489 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION : Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 28 of 46 Industry Canada Statements Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the This device has been designed to operate with the antennas listed below, and having a maximum gain of 2.0 dB. Antennas not included in this list or having a gain greater than 2.0 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.

LSR 001-0001 2.4 GHz Dipole Antenna with Reverse Polarity SMA Connector and LSR 080 -0001 U.FL to Reverse Polarity SMA Cable.
Nearson S131CL-6-PX-2450S
Embedded PCB trace antenna

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 29 of 46 OEM Responsibilities to comply with FCC and Industry Canada Regulations The ProFLEX01-R2 Module has been certified for integration into products only by OEM integrators under the following conditions: This device is granted for use in Mobile only configurations in which the antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all person and not be co-located with any other transmitters except in accordance with FCC and Industry Canada multi-transmitter product procedures. As long as the two conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for certain configuratio ns or co- location with another transmitter), then the FCC and Industry Canada authorizations are no longer considered valid and the FCC ID and IC Certification Number cannot be used on the final product. In these circumstances, the OEM integrator will be r esponsible for re -evaluating the end product (including the transmitter) and obtaining a separate FCC and Industry Canada authorization.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 30 of 46 End Product Labelling The ProFLEX01-R2 Module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following: “Contains Transmitter Module FCC ID: TFB-PROFLEX1” “Contains Transmitter Module IC: 5969A-PROFLEX1” or “Contains FCC ID: TFB-PROFLEX1” “Contains IC: 5969A-PROFLEX1” The OEM of the ProFLEX01-R2 Module must only use the approved antenna(s) listed above, which have been certified with this module. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product. The user manual for the end product must include the following information in a prominent location: This device is granted for use in Mobile only configurations in which the antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all person and not be co-located with any other transmitters except in accordance with FCC and Industry Canada multi- transmitter product procedures.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 31 of 46 EUROPE CE Notice This device has been tested and certified for use in the European Union. See the Declaration of Conformity (DoC) for specifics. If this device is used in a product, the OEM has responsibility to verify compliance of the final product to the EU standards. A Declaration of Conformity must be issued and kept on file as described in the Radio and Telecommunications Terminal Equipment (R&TTE) Directive. The ‘CE’ mark must be placed on the OEM product per the labeling requirements of the Directive. Declaration of Conformity (DoC) This DoC can be downloaded from the LSR Wiki.

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 32 of 46 ANTENNA INFORMATION Dipole Antenna 001-0001 See antenna datasheet. F Antenna Flat 2.405 GHz Figure 14 Flat 2.405 GHz -30 -25 -20 -15 -10 210 240 270 120 300 150 330 180 0 ____Vertical Polarization Gain (dBi) min: -40.4 max: -11.3 avg: -17.4

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 33 of 46 Flat 2.440 GHz Figure 15 Flat 2.440 GHz -30 -25 -20 -15 -10 210 240 270 120 300 150 330 180 0 ____Vertical Polarization Gain (dBi) min: -39.1 max: -11.6 avg: -16.0

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 34 of 46 Flat 2.480 GHz Figure 16 Flat 2.480 GHz -30 -25 -20 -15 -10 210 240 270 120 300 150 330 180 0 ____Vertical Polarization Gain (dBi) min: -41.2 max: -10.7 avg: -15.6

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 35 of 46 Side 2.405 GHz Figure 17 Side 2.405 GHz -30 -25 -20 -15 -10 210 240 270 120 300 150 330 180 0 ____Vertical Polarization Gain (dBi) min: -20.2 max: -2.3 avg: -6.2

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 36 of 46 Side 2.440 GHz Figure 18 Side 2.440 GHz -30 -25 -20 -15 -10 210 240 270 120 300 150 330 180 0 ____Vertical Polarization Gain (dBi) min: -14.6 max: -0.6 avg: -6.7

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 37 of 46 Side 2.480 GHz Figure 19 Side 2.480 GHz -30 -25 -20 -15 -10 210 240 270 120 300 150 330 180 0 ____Vertical Polarization Gain (dBi) min: -25.3 max: -1.2 avg: -6.3

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 38 of 46 Vertical 2.405 GHz Figure 20 Vertical 2.405 GHz -30 -25 -20 -15 -10 210 240 270 120 300 150 330 180 0 ____Vertical Polarization Gain (dBi) min: -9.4 max: +0.6 avg: -3.1

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 39 of 46 Vertical 2.440 GHz Figure 21 Vertical 2.440 GHz -30 -25 -20 -15 -10 210 240 270 120 300 150 330 180 0 ____Vertical Polarization Gain (dBi) min: -8.7 max: +0.8 avg: -3.1

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 40 of 46 Vertical 2.480 GHz Figure 22 Vertical 2.480 GHz -30 -25 -20 -15 -10 210 240 270 120 300 150 330 180 0 ____Vertical Polarization Gain (dBi) min: -7.8 max: +1.5 avg: -2.3

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 41 of 46 MECHANICAL DATA PCB Footprint Notes: 1) Optional alignment holes are for use with fixture placement and hand soldering operations. 2) See http://wiki.lsr.com for additional information. Figure 23 PCB footprint

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 42 of 46 General Module Dimensions Figure 24 Basic dimensions

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 43 of 46 COMPATIBILITY To maintain compatibility with other ModFLEX™ family transceiver modules it is important to use the module pins in your application as they are designated in Figure 25. Since the available GPIO and peripherals vary per micro, not all pins may be populated. All attempts are made to lay out modules starting with the lowest number in the peripheral (ADC, TMR/PWM, GPIO) series. For example if there are only two ADC’s available they will be brought out to ADC1 and ADC2 (module pins 20 and 21). GND 1 ModFLEX™ Generic Module Footprint

69 GND

JTAG - TMS 9 61 SPI - MOSI JTAG - TDI 10 60 SPI - MISO JTAG - TCK 11 59 SPI - SCK JTAG - TDO 12 58 SPI - SS JTAG/PDI/JRST 13 57 IIC - SDA nReset 14 56 IIC - SCL Analog REF 15 55 GPIO 16 Analog REF 16 54 GPIO 15 CMP+ 17 53 GPIO 14 CMP- 18 52 GPIO 13 CMPOUT 19 51 GPIO 12 ADC1 20 50 GPIO 11 ADC2 21 49 GPIO 10 ADC3 22 48 GPIO 9 ADC4 23 47 GPIO 8 ADC5 24 46 GPIO 7 ADC6 25 45 GPIO 6 VCC - 3V3DC 26 44 GND 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 TMR/PWM 1 TMR/PWM 2 TMR/PWM 3 TMR/PWM 4 TMR/PWM 5 TMR/PWM 6 TMR/PWM 7 TMR/PWM 8 UART - TX UART - RX UART - CTS UART - RTS GPIO 1 GPIO 2 GPIO 3 GPIO 4 GPIO 5 Figure 25 ModFLEX™ Generic Module Footprint

Initial production release. LS RESEARCH MAC ID: 00:25:CA:02:XX:XX:XX:XX 00:25:CA:02:XX:XX:XX = MAC ID 2D Barcode Format is Data Matrix Standard XX:XX:XX:XX = unique portion of MAC ID that changes for each module Wireless Product Development M/N: ProFLEX01-R2 P/N: 450-0075 REV 1 2D Bar Code FCC ID: TFB-PROFLEX1 IC: 5969A-PROFLEX1 RoHS Part Number: 450-0075 F Antenna Module Rev 2
Module Firmware Updated. LS RESEARCH MAC ID: 00:25:CA:02:XX:XX:XX:XX Wireless Product Development M/N: ProFLEX01-R2 P/N: 450-0075 REV 2 2D Bar Code FCC ID: TFB-PROFLEX1 IC: 5969A-PROFLEX1 RoHS Part Number: 450-0075 F Antenna Module LS RESEARCH MAC ID: 00:25:CA:02:XX:XX:XX:XX 00:25:CA:02:XX:XX:XX = MAC ID 2D Barcode Format is Data Matrix Standard XX:XX:XX:XX = unique portion of MAC ID that changes for each module Wireless Product Development M/N: ProFLEX01-R2 P/N: 450-0076 REV 1 2D Bar Code FCC ID: TFB-PROFLEX1 IC: 5969A-PROFLEX1 RoHS Part Number: 450-0076 U.FL Module LS RESEARCH MAC ID: 00:25:CA:02:XX:XX:XX:XX Wireless Product Development M/N: ProFLEX01-R2 P/N: 450-0076 REV 2 2D Bar Code FCC ID: TFB-PROFLEX1 IC: 5969A-PROFLEX1 RoHS Part Number: 450-0076 U.FL Module

Module Firmware Updated. LS RESEARCH M AC ID: 00:25:CA:02:XX:XX:XX:XX Wirel ess P rod uct Deve lopme nt M/N: ProFL EX01-R2 P/N: 45 0-00 75 REV 3 2D B ar C ode FCC ID: TFB-PROFLEX1 IC: 59 69A-PROFLEX1 RoHS Par t Num b er: 450-0075 F Antenna M od ul e LS RESEARCH M AC ID: 00:25:CA:02:XX:XX:XX:XX Wirel ess P rod uct Deve lopme nt M/N: ProFL EX01-R2 P/N: 45 0-00 76 REV 3 2D B ar C ode FCC ID: TFB-PROFLEX1 IC: 59 69A-PROFLEX1 RoHS Par t Num b er: 450-0076 U.FL Module Rev 4
Module Firmware Updated. Part Number: 450-0075 F-Antenna Module

ProFLEX01-R2 Transceiver Module Datasheet The information in this document is subject to change without notice. 330-0098-R4.1 Copyright © 2012-2018 LSR Page 46 of 46 CONTACTING LSR Headquarters LSR W66 N220 Commerce Court Cedarburg, WI 53012-2636 USA Tel: 1(262) 375-4400 Fax: 1(262) 375-4248 Website www.lsr.com Sales Contact sales@lsr.com © Copyright 2018 Laird. All Rights Reserved. Patent pending. Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials or products rests with the end user since Laird and its agents cannot be aware of all potentia l uses. Laird makes no warranties as to non-infringement nor as to the fitness, merchantability, or sustainability of any L aird materials or products for any specific or general uses. Laird, Laird Technologies, Inc., or any of its affiliates or agents s hall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Term s and Conditions of Sale in effect from time to time, a copy of which will be furnished upon request. When used as a tradename herein, Laird means Laird Limited due to the acquisition by Advent or one or more subsidiaries of Laird Limited. LairdTM, Laird TechnologiesTM, corresponding logos, and other marks are trademarks or registered trademarks of Laird. Other marks may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property right.

Product Information

080-0014 specifications and overview.

Summary

Integrated Transceiver Modules for ZigBee / 802.15.4 (2.4 GHz)

Description

Integrated Transceiver Modules for ZigBee / 802.15.4 (2.4 GHz)

Source title 080-0014 Datasheet(PDF) - Laird Tech Smart Technology

Related Parts

More parts from the same family.

Browse manufacturer