0697-0080-01 BEL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Time lag (250V AC) - Meet IEC standard 60127-3, sheet 4 - Wide operating temperature range - Bulk and Tape & Reel packing available - RoHS 2 compliant - Halogen Free - Lead Free

Applications

Provide individual protection for components or internal circuits. - Power supplies - Battery chargers - Consumer electronics - Adapter - Industrial controllers Physical Specifications Materials Base and Cover : Black thermoplastic, UL 94 -V0 Pins : 100% Matte Tin Plated Copper Marking On Fuse : "bel", "T" ,"Current Rating", "250V" & "Appropriate Safety Logos " On Label : "bel", "RST", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Electrical Characteristics (IEC-127-3 STANDARD SHEET 4 ) Safety Agency Approvals Rated Current 1.5In 2.1In 2.75In 4In 10In Min Max Min Max Min Max Min Max 80mA to 6.3A inclusive 1 2 400 10 150 3 20 150 hour min. ms sec ms sec ms ms In clause 9.2, the test voltage for RST ratings from 80mA to 6.3A is 63VDC. Safety Agency Safety Agency Certificate Voltage Rating (V) Ampere Range / Volt @ I.R. ability* 1808557 80mA-6.3A/ 250V AC 80mA-5A/250V AC @ 35A or 10 In whichever is greater. 40011144 40028321 80mA-6.3A/250V AC @ 35A or 10 In whichever is greater. E20624 80mA-6.3A/277V AC @ 100A JET 1037 -31007 -1001 1A-5A 250V AC @ 100A 2004010207111444 80mA-5A/250V AC @ 35A or 10 In whichever is greater. *I.R.= Interrupting Rating = Short Circuit Rating(Amps) LEAD FREE = HALOGEN FREE = Specifications subject to change without notice

Bel Fuse Inc.

206 Van Vorst Street

Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. RST Jan2019 Environmental Specifications Electrical Specifications Catalog Number Ampere Rating Typical Cold Resistance (ohms) Volt-drop @100% In (Volt) max. Voltage and Interrupting Ratings Melting I²T <10 mSec (A² Sec) Melting I²T @10 In (A² Sec) Maximum Power Dissipation (W) Agency Approvals RST 80 80mA 3.5 0.398 See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings 0.01 0.01 0.10 Y Y Y Y RST 1 1A 0.070 0.090 6 7 0.44 Y Y Y Y Y RST 2 2A 0.029 0.084 23 27 0.67 Y Y Y Y Y RST 4 4A 0.013 0.073 92 110 1.02 Y Y Y Y Y RST 5 5A 0.010 0.073 145 175 1.17 Y Y Y Y Y Consult manufacturer for other ratings Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz X 3 axis / no load). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs .). Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition C. Top Side. (260 ℃,20 sec) Moisture Resistance MIL-STD-202G, Method 202G, Method 106G Operating Temperature -55℃ to +125℃ Specifications subject to change without notice

Bel Fuse Inc. Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. RST Jan2019 Temperature Derating Curve Average Time Current Curve Soldering Parameters Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate 200℃ / second Heating rate during preheat typical 1 - 2℃ / second Max 4℃ / second Final preheat temperature within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. Specifications subject to change without notice

Bel Fuse Inc. Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. RST Jan2019 Fuse FGNO Explanation 0697 - [XXXX] X XX 0697=RST; [XXXX]=Ampere Rating; XX=See Ordering Information as below Mechanical Dimensions Ordering Information Packaging Packaging Option Packaging Specification Quantity Packaging Code Bulk / bag, 1000 / box N/A 1000 01 , 05 12.7 mm pitch, On Tape / box IEC-286-2 1000 02 Fraction Decimal Milliamps Bel FGNO[XXXX] Fraction Decimal Amps Bel FGNO[XXXX] 8/100 0.080 80 0080 1.0 1 1000 1/10 .100 100 0100 1-1/4 1.25 1.25 1250 1/8 .125 125 0125 1.60 1.6 1600 .160 160 0160 2.0 2 2000 2/10 .200 200 0200 2-1/2 2.5 2.5 2500 1/4 .250 250 0250 3.15 3.15 3150 .315 315 0315 4.0 4 4000 4/10 .400 400 0400 5.0 5 5000 1/2 .500 500 0500 6.3 6.3 6300 .630 630 0630 8/10 .800 800 0800 Specifications subject to change without notice