C2Q_V01 BEL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • Fast-acting - Small size, 0603 SMD - Current rating from 250mA to 5A - Wide operating temperature range from -55℃ to 125℃ - Tape and Reel for automatic SMD placement - Compatible with 260℃ IR Pb-free and wave soldering process - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 (MSL = 1) - Halogen Free and Lead Free - AEC-Q Compliant - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan

Applications

  • Notebook - LCD monitor - PC computer - Office electronic equipment - Industrial equipment - Medical equipment - POE, POE+ - LCD / LED monitor - Power supply - LCD / LED TV LEAD FREE = - DC-DC Converter HALOGEN FREE = Electrical Characteristics (UL STD.248-14) Safety Agency Approvals Physical Specifications Materials Body : Ceramic Substrate Terminations : Ag / Ni / Sn (100% Lead-free) Element Cover Coating : Lead-free Glass Marking On Fuse : None On Label : "bel", "C2Q", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Testing Current Blow Time Minimum Maximum 100% 4 Hrs. N/A 200% N/A 5 Sec 300% N/A 0.2 Sec Safety Agency Safety Agency Certificate Ampere Rating/ Voltage Rating Ampere Range / Volt @ I.R. ability* E506667 250mA-4A/32V AC 63V DC 250mA-4A/32V AC @ 35A 63V DC @ 50A 5A / 32V AC & DC 5A / 32V AC & DC @ 50A *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice

Bel Fuse Inc.

300 Executive Drive, Suite 300

West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2025 Bel Fuse, Inc. Rev. C2Q Feb2025 Temperature Derating Curve Average Time Current Curve Electrical Specifications Catalog Number Ampere Rating (A) Nominal Cold Resistance (ohms) Nominal Volt-drop @100% In (Volt) Voltage and Interrupting Ratings Nominal Melting I² T @10 In (A² Sec) Nominal Power Dissipation @100% In (W) Agency Approvals C2Q 250 250mA 0.77 0.243 See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings 0.00001 0.06 Y C2Q 300 300mA 0.54 0.217 0.00003 0.07 Y C2Q 375 375mA 0.42 0.196 0.00004 0.07 Y C2Q 500 500mA 0.28 0.171 0.00015 0.09 Y C2Q 750 750mA 0.17 0.159 0.0005 0.12 Y C2Q 1 1A 0.122 0.154 0.0010 0.15 Y C2Q 2 2A 0.053 0.133 0.0063 0.27 Y C2Q 3 3A 0.034 0.130 0.018 0.39 Y C2Q 4 4A 0.023 0.131 0.042 0.52 Y C2Q 5 5A 0.019 0.131 0.055 0.66 Y Consult manufacturer for other ratings Environmental Specifications Specifications subject to change without notice

Bel Fuse Inc. West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2025 Bel Fuse, Inc. Rev. C2Q Feb2025 Soldering Parameters Fuse FGNO Explanation 0686 - [XXXX] -XX 0686=C2Q; [XXXX]=Ampere Rating; XX=See Ordering Information as below Fraction Decimal Milliamps Bel FGNO[XXXX] Fraction Decimal Amps Bel FGNO[XXXX] Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs.). Insulation Resistance MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition C. Top Side (260℃,20 sec) MIL-STD-202G, Method 210F, Test Condition D. Bottom Side (260℃,10 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Moisture Sensitivity Level 1 (According to IPC J-Std-020) Board flex(SMD) AEC-Q200-005 Terminal strength AEC-Q200-006 Electrical characterization 3 temperature electrical IR Reflow Profile (IPC/JEDEC J-STD-020D) Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) 150℃ 200℃ 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3℃/second max. Liquidous temperature (TL) Time at liquidous (tL) 217℃ 60-150 seconds Peak temperature (Tp) 260℃ max Time (tp) within 5℃ of the specified classification temperture (Tc) 30 seconds Average ramp-down rate (Tp to Tsmax) 6℃/second max. Time 25℃ to peak temperature 8 minutes max. Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate 200℃ / second Heating rate during preheat typical 1 - 2℃ / second Max 4℃ / second Final preheat temperature within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. Specifications subject to change without notice

Bel Fuse Inc. West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2025 Bel Fuse, Inc. Rev. C2Q Feb2025 1/4 0.250 250 0250 1.0 1 1000 3/10 .300 300 0300 1-1/4 1.25 1.25 1250 3/8 .375 375 0375 1-1/2 1.50 1.5 1500 1/2 .500 500 0500 1.75 1.75 1750 3/4 .750 750 0750 2.0 2 2000 2-1/2 2.5 2.5 2500 3.0 3 3000 3-1/2 3.5 3.5 3500 4.0 4 4000 5.0 5 5000 Mechanical Dimensions Ordering Information Packaging Packaging Tape & Reel Packaging Specification Quantity Quantity & Packaging Code 8 mm wide tape with 7 inches Diameter reel EIA Standard 481-E 5000 0686-XXXX-01 Specifications subject to change without notice