5HT_V01 BEL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • High breaking capacity (250V ac @1500A) - Meet IEC standard 60127-2, sheet 5 - Wide operating temperature range - Bulk and Tape & Reel packing available - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free - Lead Free

Applications

Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Electrical Characteristics (IEC-127-2 STANDARD SHEET 5) Safety Agency Approvals Rated Current 1.5 In 2.1 In 2.75 In 4 In 10 In MIN MAX MIN MAX MIN MAX MIN MAX 250mA to 3.15A 1 30 1 80 95 5 10 100 4A to above 1 30 1 80 150 5 20 100 hr. min. sec sec ms sec ms ms In clause 9.2, the test voltage for 5HTP ratings from 1A to 6.3A is 63VDC. Materials Body : Ceramic Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper Marking On Fuse : ”Appropriate Safety Logos”, ”  ”（ RoHS compliant） On Label : "bel", "5HT”or”5HTP",”T”, "Current Rating", ”H”, "Voltage Rating", "Interrupting Rating","Appropriate Safety Logos" and " ", " "(China RoHS compliant). Safety Agency Safety Agency Certificate Ampere Rating/ Voltage Rating Ampere Range / Volt @ I.R. ability* 40000505 250mA-10A /250V AC 1A-10A/250V AC@1ˌ500A E506667 250mA-10A/250V AC@1ˌ500A LR39772 250mA-10A/250V AC@1ˌ500A Self-declaration No: 2020970207000127 250mA-10A/250V AC@1ˌ500A *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice

Bel Fuse Inc.

300 Executive Drive, Suite 300,

West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2025 Bel Fuse, Inc. Rev. 5HT Feb2025 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs). Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B. (260+/-5℃,10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Catalog Number Ampere Rating Typical Cold Resistance (ohms) Volt-drop @100%In (Volt) max. Voltage and Interrupting Ratings Melting I² T <10 mSec (A² Sec) Melting I² T @10 In (A² Sec) Maximum Power Dissipation (W) Agency Approvals 5HT(P) 250-R 250mA 3.41 1.16 See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings 0.10 0.12 0.34 Y Y Y 5HT(P) 2-R 2A 0.069 0.18 10 11 1.00 Y Y Y Y 5HT(P) 4-R 4A 0.020 0.10 56 69 1.40 Y Y Y Y 5HT(P) 5-R 5A 0.015 0.10 101 128 1.50 Y Y Y Y 5HT(P) 8-R 8A 0.008 0.09 330 439 2.70 Y Y Y Y 5HT(P) 10-R 10A 0.007 0.09 601 812 2.90 Y Y Y Y Consult manufacturer for other ratings Specifications subject to change without notice

Bel Fuse Inc. West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2025 Bel Fuse, Inc. Rev. 5HT Feb2025 Temperature Derating Curve Average Time Current Curve Soldering Parameters Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate 200℃ / second Heating rate during preheat typical 1 - 2℃ / second Max 4℃ / second Final preheat temperature within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. Specifications subject to change without notice

Bel Fuse Inc. West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2025 Bel Fuse, Inc. Rev. 5HT Feb2025 Fuse FGNO Explanation

0659 R [XXXX] -XX

0659R=5HT/5HTP; [XXXX]=Ampere Rating; XX=See Ordering Information as below Mechanical Dimensions Ordering Information *Ratings 6.3A and less have 0.032''±0.002'' diameter lead; *Ratings 8A and above have 0.039''±0.002'' diameter lead. Packaging Packaging Option Packaging Specification Quantity Packaging Code Inside Tape Spacing Bulk N/A 1000 12 N/A Bulk (Pigtail Type) N/A 500 13 N/A Tape & Reel EIA-296-F 1500 16 10mm Pitch and 63mm Fraction Decimal Milliamps Bel FGNO[XXXX] 1/4 0.250 250 0250 .315 315 0315 4/10 .400 400 0400 1/2 .500 500 0500 .630 630 0630 8/10 .800 800 0800 Fraction Decimal Amps Bel FGNO[XXXX] 1.0 1 1000 1-1/4 1.25 1.25 1250 1.60 1.6 1600 2.0 2 2000 2-1/2 2.5 2.5 2500 3.15 3.15 3150 4.0 4 4000 5.0 5 5000 6.3 6.3 6300 8.0 8 8000 10 9100 Specifications subject to change without notice