0652P2000-11

0652C BEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Features

• Reference IEC standard 60127-2, sheet 3 - Wide operating temperature range - Bulk and Tape & Reel packing available - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free - Lead Free

Applications

Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Electrical Characteristics (Reference IEC-127-2) Safety Agency Approvals Rated Current 1.5 In 2.1 In 2.75 In 4 In 10 In MIN MAX MIN MAX MIN MAX MIN MAX 500mA-12.5 A 1 2 600 10 150 3 20 300 hr. min. ms sec ms sec ms ms Materials Body : Glass Cap : Nickel Plated Brass Caps Leads : Tin Plated Copper Marking On Fuse : “bel”,” Appropriate Safety Logos” On Label : "bel", "0652C” or "0652P”,” T”,"Current Rating", “L“,"Voltage Rating", "Interrupting Rating”, “Appropriate Safety Logos" and " ", " "(China RoHS compliant). Safety Agency Safety Agency Certificate Ampere Rating/ Voltage Rating Ampere Range / Volt @ I.R. ability* E506667 500mA-12.5A /250V AC 500mA-1A/250V AC@35A 1.25A-10A/250V AC@100A E506667 12.5A /250V AC@100A *I.R.= Interrupting Rating = Short Circuit Rating (Amps) Specifications subject to change without notice

Bel Fuse Inc.

300 Executive Drive, Suite 300,

West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2024 Bel Fuse, Inc. 0652x Sep2024_1.2R Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs.) Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B (260+/ -5℃,10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Catalog Number Ampere Rating Typical Cold Resistance (ohms) Volt-drop @100%In (Volt) max. Voltage and Interrupting Ratings Melting I² T <10 mSec (A² Sec) Maximum Power Dissipation (W) Agency Approvals 0652C0500-XX 500mA 0.19 0.130 See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings 1.11 0.26 Y 0652P0500-XX 0652C0630-XX 630mA 0.15 0.130 1.50 0.38 Y 0652P0630-XX 0652C0800-XX 800mA 0.10 0.110 2.27 0.40 Y 0652P0800-XX 0652C1000-XX 1A 0.078 0.110 5.52 0.46 Y 0652P1000-XX 0652C2000-XX 2A 0.032 0.090 10.98 0.86 Y 0652P2000-XX 0652C4000-XX 4A 0.014 0.080 54.39 1.60 Y 0652P4000-XX 0652C5000-XX 5A 0.010 0.080 132.25 1.60 Y 0652P5000-XX 0652C8000-XX 8A 0.0070 0.080 281.60 3.48 Y 0652P8000-XX 0652C9100-XX 10A 0.0050 0.080 534.29 3.60 Y 0652P9100-XX Consult manufacturer for other ratings Specifications subject to change without notice

Bel Fuse Inc. West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2024 Bel Fuse, Inc. 0652x Sep2024_1.2R Temperature Derating Curve Average Time Current Curve Soldering Parameters Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate 200℃ / second Heating rate during preheat typical 1 - 2℃ / second Max 4℃ / second Final preheat temperature within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. 0.01 0.1 100 1000 10000 0.1 1 10 100 1000 10000 Specifications subject to change without notice 630mA 10A 0652C/0652P-TIME CURRENT CHARACTERISTIC CURVE CURRENT IN AMPERES TIME IN SECONDS

Bel Fuse Inc. West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2024 Bel Fuse, Inc. 0652x Sep2024_1.2R Fuse FGNO Explanation 0652X [XXXX]-XX 0652C/P=0652C/P; [XXXX]=Ampere Rating; XX=See Ordering Information as below Milliamps Bel FGNO[XXXX] Amps Bel FGNO[XXXX] Amps Bel FGNO[XXXX] 500 0500 1.6 1600 5 5000 630 0630 2 2000 6.3 6300 800 0800 2.5 2500 8 8000 1 1000 3.15 3150 10 9100 1.25 1250 4 4000 12.5 9125 Mechanical Dimensions Ordering Information Packaging Packaging Option Packaging Specification Quantity Packaging Code Inside Tape Spacing Bulk (Cartridge version) N/A 1000 11 N/A Bulk (Axial Pigtail version) N/A 500 13 N/A Tape & Reel N/A 1500 16 10mm Pitch and 63mm Specifications subject to change without notice

0652 X XXXX – XX

0652= 0652 Series Mounting Tab Style C = For Cartridge Version P = For Axial Pigtail Version AMPERE RATING Refer to fuse FGNO explanation table PACKAGING& QUANTITY CODE 11 = Bulk 1000/box, For cartridge version 13 = Bulk 500/box, For axial pigtail standard length 16 = 1500/box Tape & Reel (pigtail version)