0651P1250-11

0651C BEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Features

• Reference IEC standard 60127-2, sheet 2 - Wide operating temperature range - Bulk and Tape packing available - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free - Lead Free

Applications

Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Electrical Characteristics (Reference IEC-127-2) Safety Agency Approvals Rated Current 1.5 In 2.1 In 2.75 In 4 In 10 In MIN MAX MIN MAX MIN MAX MAX 500mA to 6.3A 1 30 50 2 10 300 20 8A to 10A 1 30 50 2 10 400 40 hr. min. ms sec ms ms ms Materials Body : Glass Cap : Nickel Plated Brass Caps Leads : Tin Plated Copper Marking On Fuse : “bel”,” Appropriate Safety Logos” On Label : "bel", "0651C” or "0651P”,” F”,"Current Rating", “L“,"Voltage Rating", "Interrupting Rating”, “Appropriate Safety Logos" and " ", " "(China RoHS compliant). Safety Agency Safety Agency Certificate Ampere Rating/ Voltage Rating Ampere Range / Volt @ I.R. ability* E506667 500mA-10A /250V AC 500mA-10A/250V AC@35A or 10 In whichever is greater *I.R.= Interrupting Rating = Short Circuit Rating (Amps) Specifications subject to change without notice

Bel Fuse Inc.

300 Executive Drive, Suite 300,

West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2024 Bel Fuse, Inc. 0651x Sep2024_1.2R Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs.) Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B (260+/ -5℃,10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Catalog Number Ampere Rating Typical Cold Resistance (ohms) Volt-drop @100%In (Volt) Max. Voltage and Interrupting Ratings Melting I² T <10 mSec (A² Sec) Maximum Power Dissipation (W) Agency Approvals 0651C0500-XX 500mA 0.382 0.330 See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings 0.230 0.65 Y 0651P0500-XX 0651C0630-XX 630mA 0.225 0.220 0.596 0.70 Y 0651P0630-XX 0651C0800-XX 800mA 0.138 0.160 0.614 0.80 Y 0651P0800-XX 0651C1000-XX 1A 0.103 0.140 1.09 0.86 Y 0651P1000-XX 0651C2000-XX 2A 0.037 0.100 7.50 1.10 Y 0651P2000-XX 0651C4000-XX 4A 0.018 0.110 31.46 1.91 Y 0651P4000-XX 0651C5000-XX 5A 0.014 0.120 40.18 2.50 Y 0651P5000-XX 0651C8000-XX 8A 0.0077 0.110 187.72 3.70 Y 0651P8000-XX 0651C9100-XX 10A 0.0067 0.110 257.07 4.00 Y 0651P9100-XX Consult manufacturer for other ratings Specifications subject to change without notice

Bel Fuse Inc. West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2024 Bel Fuse, Inc. 0651x Sep2024_1.2R Temperature Derating Curve Average Time Current Curve Soldering Parameters Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate 200℃ / second Heating rate during preheat typical 1 - 2℃ / second Max 4℃ / second Final preheat temperature within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. 0.01 0.1 100 1000 10000 0.1 1 10 100 1000 Specifications subject to change without notice 0651C/0651P-TIME CURRENT CHARACTERISTIC CURVE CURRENT IN AMPERES TIME IN SECONDS

Bel Fuse Inc. West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2024 Bel Fuse, Inc. 0651x Sep2024_1.2R Fuse FGNO Explanation 0651X [XXXX]-XX 0651C/P=0651C/P; [XXXX]=Ampere Rating; XX=See Ordering Information as below Milliamps Bel FGNO[XXXX] Amps Bel FGNO[XXXX] Amps Bel FGNO[XXXX] 500 0500 1.6 1600 5 5000 630 0630 2 2000 6.3 6300 800 0800 2.5 2500 8 8000 1 1000 3.15 3150 10 9100 1.25 1250 4 4000 Mechanical Dimensions Ordering Information Packaging Packaging Option Packaging Specification Quantity Packaging Code Inside Tape Spacing Bulk (Cartridge version) N/A 1000 11 N/A Bulk (Axial Pigtail version) N/A 500 13 N/A Tape & Reel N/A 1500 16 10mm Pitch and 63mm Specifications subject to change without notice

0651 X XXXX – XX

0651= 0651 Series Mounting Tab Style C = For Cartridge Version P = For Axial Pigtail Version AMPERE RATING Refer to fuse FGNO explanation table PACKAGING& QUANTITY CODE 11 = Bulk 1000/box, For cartridge version 13 = Bulk 500/box, For axial pigtail standard length 16 = 1500/box Tape & Reel (pigtail version)