06506 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  1. Strong and thick masking paper 2. Available in a variety of sizes 3. Specially treated paper Advantages 1. Conformable to many surfaces 2. Good performance on apron tapers and maskers; appropriate size paper for every application 3. Good penetration resistance Benefits 1. Helps improve productivity 2. Helps improve productivity and reduce paper waste 3. Helps minimize rework from bleed-through Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Basic Weight 30 lbs. per 3000 square ft ASTM D646 Machine Direction Tensile 24 lbs. per inch ASTM D828 Caliper 2.8 mil (0.071 mm) ASTM D645 Product Uses Masking paper intended to protect surfaces from paint overspray and solvent bleed-through.

Scotch™ Steel Gray Masking Paper 06506 • 06512 • 06518 • 06524 • 06536 Performance Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

  • Can withstand a bake cycle up to 400°F (204°C) for one hour.
  • Resists penetration of solvents, lacquers and enamels. Directions for Use Paper should not be pulled taut over surfaces. Apply paper with sufficient slack to minimize puddling of clearcoat or high solvent paints that could cause bleed-through. Storage and Handling For best performance, product should be used within 36 months from the date of manufacture. Product should be stored in the original carton under normal conditions of 70°F (21°C) and 50% RH (relative humidity). Precautionary Information Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this product. See link below: http://solutions.3m.com/wps/portal/3M/en_US/MSDS/Search/?gsaAction=msdsSRA&msdsLocate=en_US Technical Information The technical information, recommendations and ot her statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular applicati on. Given the variety of factors that can affect the use and performance of a 3M product, user is sole ly responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty, Limited Remedy, and Disclaimer Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. For Additional Health and Safety Information Automotive Aftermarket Division 3M Center, Building 223-6N-01 St. Paul, MN 55144-1000 www.3M.com/automotive This is the last page 3M and Scotch are trademarks of 3M Company. Printed in U.S.A. ©3M 2013 All rights reserved. (6/13)