0643960000

0643960000 WEIDMULLER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Creation date May 25, 2021 10:33:31 PM CEST Catalogue status 21.05.2021 / We reserve the right to make technical changes. 1 TOP1.5GS180ES 5 1STI OR Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Product image Similar to illustration Conductor entry and screw connection in the same direction on this PCB terminal with 5.08 mm pitch for conductor cross-sections up to 2.5 mm². Conductor outlet direction 90° and 180°. General ordering data Version Printed circuit board terminals, 5.08 mm, Number of poles: 1, 180°, Solder pin length (l): 4.5 mm, tinned, orange, TOP connection, Clamping range, max. : 2.5 mm², Box Order No. 0643960000 Type TOP1.5GS180ES 5 1STI OR GTIN (EAN) 4008190087944 Qty. 235 pc(s). Product data IEC: 630 V / 24 A / 0.5 - 2.5 mm² UL: 300 V / 10 A / AWG 26 - AWG 14 Packaging Box

TOP1.5GS180ES 5 1STI OR Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date May 25, 2021 10:33:31 PM CEST Catalogue status 21.05.2021 / We reserve the right to make technical changes. 2 Dimensions and weights Depth 18.5 mm Depth (inches) 0.728 inch Height 24 mm Height (inches) 0.945 inch Height of lowest version 19.5 mm Width 6.88 mm Width (inches) 0.271 inch Net weight 3.27 g System parameters Product family OMNIMATE Signal - series TOP1.5GS Wire connection method TOP connection Mounting onto the PCB THT solder connection Conductor outlet direction 180° Pitch in mm (P) 5.08 mm Pitch in inches (P) 0.2 inch Number of poles 1 Pin series quantity 1 Fitted by customer No Solder pin length (l) 4.5 mm Solder pin dimensions 0.8 x 1.0 mm Solder eyelet hole diameter (D) 1.3 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Number of solder pins per pole 2 Screwdriver blade 0.6 x 3.5 Screwdriver blade standard DIN 5264 Tightening torque, min. 0.4 Nm Tightening torque, max. 0.5 Nm Clamping screw M 2.5 Stripping length 10 mm L1 in mm 0 mm L1 in inches 0 inch Touch-safe protection acc. to DIN VDE

0470 IP 20

Touch-safe protection acc. to DIN VDE 57 106 Safe from finger touch Volume resistance 1.20 mΩ Material data Insulating material PA Colour orange Colour chart (similar) RAL 2000 Insulating material group I Comparative Tracking Index (CTI) ≥ 600 Insulation strength ≥ 108 Ω UL 94 flammability rating V-2 Contact material CuZn Storage temperature, min. -40 °C Storage temperature, max. 70 °C Operating temperature, min. -50 °C Operating temperature, max. 100 °C Temperature range, installation, min. -25 °C Temperature range, installation, max. 100 °C Conductors suitable for connection Clamping range, min. 0.13 mm² Clamping range, max. 2.5 mm² Wire connection cross section AWG, min. AWG 26 Wire connection cross section AWG, max. AWG 14 Solid, min. H05(07) V-U 0.5 mm² Solid, max. H05(07) V-U 2.5 mm² Flexible, min. H05(07) V-K 0.5 mm² Flexible, max. H05(07) V-K 2.5 mm² w. plastic collar ferrule, DIN 46228 pt 4, min. 0.5 mm² w. plastic collar ferrule, DIN 46228 pt 4, max. 2.5 mm² w. wire end ferrule, DIN 46228 pt 1, min. 0.5 mm² w. wire end ferrule, DIN 46228 pt 1, max. 2.5 mm² Plug gauge in accordance with EN 60999 a x b; ø 2.4 mm x 1.5 mm

TOP1.5GS180ES 5 1STI OR Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date May 25, 2021 10:33:31 PM CEST Catalogue status 21.05.2021 / We reserve the right to make technical changes. 3 Clampable conductor Cross-section for conductor connection Type fine-wired nominal 0.5 mm² wire end ferrule Stripping length nominal 12 mm Recommended wire- end ferrule H0,5/16 OR Stripping length nominal 10 mm Recommended wire- end ferrule H0,5/10 Cross-section for conductor connection Type fine-wired nominal 0.75 mm² wire end ferrule Stripping length nominal 12 mm Recommended wire- end ferrule H0,75/16 W Stripping length nominal 10 mm Recommended wire- end ferrule H0,75/10 Cross-section for conductor connection Type fine-wired nominal 1 mm² wire end ferrule Stripping length nominal 12 mm Recommended wire- end ferrule H1,0/16D R Stripping length nominal 10 mm Recommended wire- end ferrule H1,0/10 Cross-section for conductor connection Type fine-wired nominal 1.5 mm² wire end ferrule Stripping length nominal 10 mm Recommended wire- end ferrule H1,5/10 Stripping length nominal 12 mm Recommended wire- end ferrule H1,5/16 R Cross-section for conductor connection Type fine-wired nominal 2.5 mm² wire end ferrule Stripping length nominal 10 mm Recommended wire- end ferrule H2,5/10 Reference text Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P) Rated data acc. to IEC tested acc. to standard IEC 60664-1, IEC 61984 Rated current, min. number of poles (Tu=20°C) 24 A Rated current, max. number of poles (Tu=20°C) 19 A Rated current, min. number of poles (Tu=40°C) 21 A Rated current, max. number of poles (Tu=40°C) 16 A Rated voltage for surge voltage class / pollution degree II/2 630 V Rated voltage for surge voltage class / pollution degree III/2 320 V Rated voltage for surge voltage class / pollution degree III/3 250 V Rated impulse voltage for surge voltage class/ pollution degree II/2 2.5 kV Rated impulse voltage for surge voltage class/ pollution degree III/2 2.5 kV Rated impulse voltage for surge voltage class/ contamination degree III/3 2.5 kV Short-time withstand current resistance 3 x 1s with 120 A

TOP1.5GS180ES 5 1STI OR Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date May 25, 2021 10:33:31 PM CEST Catalogue status 21.05.2021 / We reserve the right to make technical changes. 4 Rated data acc. to CSA Institute (CSA) Certificate No. (CSA) 154685-1501716 Rated voltage (Use group B / CSA) 300 V Rated voltage (Use group D / CSA) 300 V Rated current (Use group B / CSA) 10 A Rated current (Use group D / CSA) 10 A Wire cross-section, AWG, min. AWG 26 Wire cross-section, AWG, max. AWG 14 Reference to approval values Specifications are maximum values, details - see approval certificate. Rated data acc. to UL 1059 Institute (UR) Certificate No. (UR) E60693 Rated voltage (Use group B / UL 1059) 300 V Rated voltage (Use group D / UL 1059) 300 V Rated current (Use group B / UL 1059) 10 A Rated current (Use group D / UL 1059) 10 A Wire cross-section, AWG, min. AWG 26 Wire cross-section, AWG, max. AWG 14 Reference to approval values Specifications are maximum values, details - see approval certificate. Packing Packaging Box VPE length 83 mm VPE width 96 mm VPE height 164 mm Classifications ETIM 6.0 EC002643 ETIM 7.0 EC002643 ECLASS 9.0 27-44-04-01 ECLASS 9.1 27-44-04-01 ECLASS 10.0 27-44-04-01 ECLASS 11.0 27-46-01-01 Important note IPC conformity Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Notes • Long term storage of the product with average temperature of 50 °C and average humidity 70%, 36 months Approvals Approvals ROHS Conform UL File Number Search E60693

TOP1.5GS180ES 5 1STI OR Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date May 25, 2021 10:33:31 PM CEST Catalogue status 21.05.2021 / We reserve the right to make technical changes. 5 Downloads Catalogues Catalogues in PDF-format Brochures FL DRIVES EN FL DRIVES DE

TOP1.5GS180ES 5 1STI OR Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Drawings Creation date May 25, 2021 10:33:31 PM CEST Catalogue status 21.05.2021 / We reserve the right to make technical changes. 6 Dimensional drawing Graph

Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com 260 240 220 200 180 160 140 120 100 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time [s] Temperature [°C] Preheating Cooling rate < 6 °K/s 250 °C 260 °C Heating rate < 3 °K/s 255 °C Typical process Process limits Temperature on board Total contact time max. 10 sec. appr. 150°C 260 240 220 200 180 160 140 120 100 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time [s] Temperature [°C] Preheating Cooling rate < 6 °K/s 250 °C 260 °C Contact time appr. 3 sec. Typical process Prozess limits Temperature on board Heating rate < 3 °K/s 255 °C appr. 150 °C Wave soldering profiles Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile. Wave Solder Profile Recommended wave solderding profiles We reserve the right to make technical changes. Single Wave: Double Wave: