06350543

TESTO480 TESTO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

%RH m/s hPa ppm CO 2 Lux Measurement of all VAC-relevant parameters: flow velocity, temperature, humidity, pressure, light intensity, radiant heat, degree of turbulence, CO 2, PMV/PPD and WBGT index High-quality, digital probes and intelligent calibration concept Highly accurate, integrated differential pressure sensor Fast and professional report creation via PC software „EasyClimate“ Integrated, guided measurement programs: – VAC grid measurement according to EN 12599 – PMV/PPD measurement according to ISO 7730 – degree of turbulence measurement according to EN 13779 – WBGT-measurement based on ISO 7243 / DIN 33403 Multi-function VAC measuring instrument testo 480 – Cutting-edge technology for professionals We measure it. With the testo 480, you record, analylze and document all VAC-relevant parameters with only one instrument. The multi-function VAC measuring instrument stands out above all thanks to its accuracy and practice-oriented handling. testo 480 supports assessors, consultants, technical service providers or service technicians in the ventilation and air conditioning field. Measurement tasks such as the standardized adjustment of VAC systems in office, residential and industrial buildings can be carried out quickly and efficiently. In addition to this, you test the relevant quality parameters for your production and processing systems reliably and precisely – thanks to the measuring instrument's comprehensive probe range specially tailored to industrial requirements. The multi-function VAC measuring instrument is equipped with intelligent, digital probes which are calibrated independently of the hand-held instrument. www.testo.com testo-480-P01 22.10.2014 11:33 Seite 1

High-end VAC measuring instrument testo 480, including "EasyClimate" PC software, power supply, USB cable and calibration protocol Part no. 0563 4800 Technical data Sensor type Resolution Differential pressure, integrated 0.001 hPa Measuring range -100 to +100 hPa Sensor type Resolution Radiation temperature, globe 0.1 °C Measuring range 0 to +120 °C Sensor type Resolution Vane, 100 mm 0.01 m/s Measuring range +0.1 to +15 m/s Sensor type Resolution Testo humid. sensor, cap. 0.1 %RH Measuring range 0 to 100 %RH Absolute pressure, integrated and external 0.1 hPa 700 to 1100 hPa Pt100 0.01 °C -100 to +400 °C Hot wire, Hot bulb 0.01 m/s 0 to +20 m/s CO 1 ppm CO 2 0 to 10000 ppm CO 2 Type K (NiCr-Ni) 0.1 °C -200 to +1370 °C Accuracy ±1 digit ±(0.3 Pa +1% of m.v.) (0 to +25 hPa) ±3 hPa ±(0.3 °C +0.1% of m.v.) Vane, 16 mm 0.1 m/s +0.6 to +50 m/s Comfort probe 0.01 m/s 0 to +5 m/s Lux

1 Lux

We measure it. Comfort measurement HVAC measurement - High-end VAC measuring instrument testo 480 incl. PMV/PPD measurement (Part no. 0563 4800) - Comfort probe for degree of turbulence measurement according to EN 13779 (Part no. 0628 0143)* - Globe probe Ø 150mm, TC Type K, for measuring radiant heat (Part no. 0602 0743) - IAQ probe for analyzing Indoor Air Quality, CO 2, humidity, temperature and absolute pressure measurement, incl. table tripod (Part no. 0632 1543)* - Lux probe for measuring light intensity (Part no. 0635 0543) - 2 x Plug-in head cable for digital probes (Part no. 0430 0100) - Tripod for workplace evaluation (Part no. 0554 0743) - System case for comfort level measurement (Part no. 0516 4801) *Plug-in head cable required (order no. 0430 0100) - High-end VAC measuring instrument testo 480 incl. PMV/PPD measurement (Part no. 0563 4800) - Vane measurement probe Ø 16 mm with telescope (scaling max. 960 mm) and integrated measurement button (Part no. 0635 9542)* - Thermal flow velocity probe (hot wire) Ø 10 mm, bendable by 90° (200 mm) with telescope (scaling max. 1100 mm) and integrated measurement button (Part no. 0635 1543)* - Humidity and temperature probe Ø 12 mm, highly accurate humidity measurement with 1% accuracy (Part no. 0636 9743)* - Vane measurement probe Ø 100 mm, for measurements on ventilation outlets (Part no. 0635 9343)* - Plug-in head cable for digital probes (Part no. 0430 0100) - System case for HVAC measurements (Part no. 0516 4800) *Plug-in head cable required (order no. 0430 0100) General technical data Probe connection 2 x TC Type K, 1 x differential pressure, 3 x digital Interfaces USB connection, SD card, mains unit, infrared for fast printer Operating temperature 0 to +40 °C Storage temperature -20 to +60 °C Power supply Rechargeable battery, plug-in mains unit for long-term measurements and charging battery Battery life approx. 17 hours (hand instrument without probes, with 50 % display brightness) Display Colour graphic display Memory 1.8 GB (approx. 60.000.000 measurement values) testo-480-P02 05.12.2014 11:29 Seite 2

We measure it. Probe type Vane measurement probe Ø 16 mm with telescope (scaling max. 960 mm) and integrated measurement button* High-temperature vane measurement probe Ø 16 mm with telescope (scaling max. 960 mm) and integrated measurement button* Thermal flow velocity probe (hot wire) Ø 10 mm, bendable by 90° (200 mm) with telescope (scaling max. 1100 mm) and integrated measurement button* Thermal flow velocity probe (hot wire) Ø 7.5 mm, with telescope (max. 790 mm) and fixed plug-in head cable Thermal flow velocity probe (robust hot bulb) Ø 3 mm, with telescope, (max. 860 mm) and fixed plug-in head cable, for direction- independent flow velocity measurement Vane measurement probe Ø 100 mm, for measurements on ventilation outlets* Thermal flow velocity probe (hot wire) Ø 10 mm, with telescope, (max. 730 mm) and fixed plug-in head cable, for the measurement of air flow velocity in laboratory extrac- tors according to EN 14175-3/-4 Humidity and temperature probe Ø 12 mm, highly accurate humidity measurement with 1% accuracy* IAQ probe for analyzing Indoor Air Quality, CO 2, humidity, temperature and absolute pressure measurement, incl. table tripod* Comfort probe for degree of turbulence measurement according to EN 13779* Globe probe Ø 150mm, TC Type K, for measuring radiant heat *Plug-in head cable required (order no. 0430 0100) Measuring range 0.6 to 50 m/s -10 to +70 °C 0.6 to 50 m/s -30 to +140 °C 0 to +20 m/s -20 to +70 °C 0 to 100 %RH +700 to +1100 hPa 0 to +20 m/s -20 to +70 °C 0 to +10 m/s -20 to +70 °C +0.1 to +15 m/s 0 to +60 °C 0 to +5 m/s 0 to +50 °C 0 to 100 %RH -20 to +70 °C 0 to +50 °C 0 to 100 %RH 0 to +10000 ppm CO +700 to +1100 hPa 0 to +50 °C 0 to +5 m/s +700 to +1100 hPa 0 to +120 °C Accuracy ±1 digit ±(0.2 m/s +1 % of m.v.) (0.6 to 40 m/s) ±(0.2 m/s +2 % of m.v.) (40.1 to 50 m/s) ±1.8 °C ±(0.2 m/s +1 % of m.v.) (0.6 to 40 m/s) ±(0.2 m/s +2 % of m.v.) (40.1 to 50 m/s) ±(0.03 m/s +4% of m.v.) ±0.5 °C ±3 hPa ±(0.03 m/s +5% of m.v.) ±0.5 °C ±(0.03 m/s +5% of m.v.) ±0.5 °C ±(0.1 m/s +1.5% of m.v.) ±0.5 °C ±(0.02 m/s +5% of m.v.) ±0.5 °C ±(1.0 %RH + 0.7% of m.v.) 0 to 90 %RH %RH ±0.5 °C (remaining range) ±0.5 °C ±(75 ppm CO 2 +3 % of m.v.) 0 to +5000 ppm CO 2 ±(150 ppm CO 2 +5 % of m.v.) 5001 to +10000 ppm CO 2 ±3 hPa ±0.5 °C ±(0.03 m/s +4% of m.v.) ±3 hPa Class 1 Part no. 0635 9542 0635 9552 0635 1543 0635 1024 0635 1050 0635 9343 0635 1048 0636 9743 0632 1543 0628 0143 0602 0743 Digital flow velocity probes Digital comfort probes testo-480-P03 05.11.2014 07:33 Seite 3

We measure it. Lux probe for measuring light intensity WBGT set (Wet Bulb Globe Temperature) for the evaluation of heat workplaces affected by heat, based on ISO 7243 / DIN 33403-3, consisting of globe, ambient temperature and wet bulb temperature probes, plug-in head cables, tripod and case 0 to +100000 Lux 0 to +120 °C +10 to +60 °C +5 to +40 °C Class C according to DIN 5032-7; f1 = 6% V-Lamda; f2 = 5% cos Class 1 0635 0543 0635 8888 ID no. 0699 6920/1 Digital comfort probes Digital humidity probe Probe type Digital precision air probe, Pt100, Plug-in head cable required (Order no. 0430 0100) Robust humidity probe Do not use in condensing amosphere. For continuous use in high-humidity ranges >80 %RH at ≤30 °C for > 12 h >60 %RH at >30 °C for > 12 h please refer to Testo customer service or contact us via the Testo website. Dimensions Probe shaft/probe shaft tip Measuring range -100 to +400 °C 0 to 100 %RH -20 to +180 °C Accuracy ±3 %RH (0 to 2 %RH) ±2 %RH (2.1 to 98 %RH) ±3 %RH (98.1 to 100 %RH) t99 Part no. 0614 0072 0636 9753 150 mm Ø 9 mm High-precision Pt100 immersion and penetration probe, Plug-in head cable required (order no. 0430 0100) Special versions of the Pt100 probe on request ( e.g. as a surface probe or air probe, probe shaft extended, strengthened) Adapter cable for connecting analog Pt100 probe to testo 480 -100 to +400 °C 200 mm Ø 3 mm 0614 0073 Digital temperature probe Fast-reaction digital surface probe with sprung thermocouple Type K, short-term up to +500 °C, Plug-in head cable required (Order no. 0430 0100) Remaining range (-200 to -40.1 °C) is not specified 0614 0195 150 mm Ø 10 mm Highly precise digital immersion/penetration probe, Pt100, Plug-in head cable required (Order no. 0430 0100) Flexible digital precision penetration probe, PTFE cable heat-proof to +300 °C, Plug-in head cable required (Order no. 0430 0100) -80 to +300 °C -100 to +265 °C 0614 0275 0614 0071 295 mm Ø 4 mm Ø 4 mm 1000 mm testo-480-P04 12.01.2015 13:02 Seite 4

We measure it. Fast-action surface probe with sprung thermocouple strip, bent, also for uneven surfaces, measurement range short-term to +500°C, TC Type K, Fixed cable -60 to +300 °C Class 2 1) 3 s 0602 0993 80 mm 50 mm Ø 5 mm Ø 12 mm Probe type Magnetic probe, adhesive force approx. 20 N, with magnets, for measurements on metal surfaces, TC Type K, Fixed cable Magnetic probe, adhesive force approx. 10 N, with magnets, for higher temp., for measurements on metal surfaces, TC Type K, Fixed cable Waterproof surface probe with widened measurement tip for flat surfaces, T/C Type K, Fixed cable Dimensions Probe shaft/probe shaft tip Measuring range -50 to +170 °C -50 to +400 °C -60 to +400 °C Accuracy Class 2 1) Class 2 1) Class 2 1) t99 150 s 30 s Part no. 0602 4792 0602 4892 0602 1993 35 mm 75 mm 115 mm Ø 5 mm Ø 20 mm Ø 21 mm Ø 6 mm Information on surface measurement:

• The response times t 99 stated are measured on ground steel or aluminium plates at +60 °C.
• The stated accuracies are sensor accuracies.
• The accuracy in your application is dependent on the surface structure (roughness), material of the measurement object (heat capacity and heat transfer), as wel as sensor accuracy. Testo creates a corresponding calibration certificate for the deviations of your measurement system in your application. For this purpose, Testo uses a surface test bench developed in cooperation with the PTB (Physikalisch Technische Bundesanstalt). Flat head surface probe with telescopic handle max. 680 mm for measurements at hard-to-access points, TC Type K, Fixed cable 1.6 m (correspondingly shorter when telescope extended) -50 to +250 °C Class 2 1) 3 s 0602 2394 985 ±5 mm 12 mm Ø 25 mm Robust air probe, T/C Type K, Fixed cable Fast-action surface probe with sprung thermocouple strip, also for uneven surfaces, measurement range short-term to +500°C, TC Type K, Fixed cable Fast-reaction paddle surface probe, for measurements in inaccessible places, e.g. narrow apertures and slots, TC Type K, Fixed cable Efficient, waterproof surface probe with small measurement head for flat surfaces, TC Type K, Fixed cable -60 to +400 °C -60 to +300 °C 0 to +300 °C -60 to +1000 °C Class 2 Class 2 1) Class 2 1) Class 1 1) 25 s 3 s 5 s 20 s 0602 1793 0602 0393 0602 0193 0602 0693 Analog temperature probe 115 mm 115 mm 150 mm Ø 4 mm Ø 5 mm Ø 2.5 mm Ø 12 mm Ø 4 mm 1) According to standard EN 60584-2, the accuracy of Class 1 refers to -40 to +1000 °C (Type K), Class 2 to -40 to +1200 °C (Type K), Class 3 to -200 to +40 °C (Type K). A probe always corresponds to only one accuracy class. 145 mm 40 mm Ø 8 mm Ø 7 mm testo-480-P05 22.10.2014 11:35 Seite 5

testo 480 We measure it. Probes 1) According to standard EN 60584-2, the accuracy of Class 1 refers to -40 to +1000 °C (Type K), Class 2 to -40 to +1200 °C (Type K), Class 3 to -200 to +40 °C (Type K). A probe always corresponds to only one accuracy class. Probe type Efficient and fast-action immersion probe, waterproof, TC Type K, Fixed cable Fast-action, waterproof immersion/penetration probe, TC Type K, Fixed cable Immersion tip, flexible, TC Type K Immersion tip, flexible, TC Type K Immersion measurement tip, flexible, for measurements in air/exhaust gases (not suitable for measurements in smelters), TC Type K Waterproof immersion/penetration probe, TC Type K, Fixed cable Flexible, low-mass immersion measurement tip, ideal for measurements in small volumes such as petri dishes, or for surface measurements (e.g. attached with adhesive tape), TC Type K, 2 m, FEP insulated thermal wire, temperature proof up to 200 °C, oval wire with dimensions: 2.2 mm x 1.4 mm Dimensions Probe shaft/probe shaft tip Measuring range -60 to +1000 °C -60 to +800 °C -200 to +1000 °C -200 to +40 °C -200 to +1300 °C -60 to +400 °C -200 to +1000 °C Accuracy Class 1 1) Class 1 1) Class 1 1) Class 3 1) Class 1 1) Class 2 1) Class 1 1) t99 2 s 3 s 5 s 5 s 4 s 7 s 1 s Part no. 0602 0593 0602 2693 0602 5792 0602 5793 0602 5693 0602 1293 0602 0493 Analog temperature probe 300 mm 60 mm 1000 mm 114 mm 500 mm 14 mm 50 mm Ø 1.5 mm Ø 5 mm Ø 1.5 mm Ø 1.5 mm Ø 3 mm Ø 5 mm Ø 0.25 mm Ø 1.5 mm 500 mm 500 mm Ø 3.7 mm Waterproof food probe made of stainless steel (IP65), TC Type K, Fixed cable -60 to +400 °C Class 2 1) 7 s 0602 2292 125 mm 30 mm Ø 4 mm Ø 3.2 mm Pipe wrap probe with velcro strip; for temperature measurement on pipes with diameter up to max. 120 mm; Tmax. +120 °C; TC Type K , Fixed cable Pipe wrap probe for pipe diameter 5 to 65 mm, with exchangeable measuring head. Meas. range short-term up to +280°C, TC Type K, Fixed cable Spare meas. head for pipe wrap probe, TC Type K Clamp probe for measurements on pipes, pipe diameter 15 to 25 mm (max. 1"), meas. range short-term up to +130°C, TC Type K, Fixed cable -50 to +120 °C -60 to +130 °C -60 to +130 °C -50 to +100 °C Class 1 Class 2 1) Class 2 1) Class 2 1) 90 s 5 s 5 s 5 s 0628 0020 0602 4592 0602 0092 0602 4692 395 mm 35 mm 20 mm 15 mm testo-480-P06 22.10.2014 11:36 Seite 6

testo 480 We measure it. Probes Probe type Dimensions Probe shaft/probe shaft tip Part no. Pitot tube, 500 mm long, Ø 7 mm, stainless steel, for measuring flow velocity* Pitot tube, 350 mm long, Ø 7 mm, stainless steel, for measuring flow velocity* Pitot tube, 1000 mm long, stainless steel, for measuring flow velocity* Straight pitot tube with integrated temperature measurement, incl. connection hose, length 360 mm Straight pitot tube with integrated temperature measurement, incl. connection hose, length 500 mm Straight pitot tube with integrated temperature measurement, incl. connection hose, length 1000 mm Measuring range: 1 to 100 m/s Operating temperature: 0 to +600 °C Pitot tube factor: 1.0 Measuring range: 1 to 100 m/s Operating temperature: 0 to +600 °C Pitot tube factor: 1.0 Measuring range: 1 to 100 m/s Operating temperature: 0 to +600 °C Pitot tube factor: 1.0 Measuring range: 1 to 30 m/s Operating temperature: 0 to +600 °C Pitot tube factor: 0.67 Minimum immersion depth: 150 mm Measuring range: 1 to 30 m/s Operating temperature: 0 to +600 °C Pitot tube factor: 0.67 Minimum immersion depth: 150 mm Measuring range: 1 to 30 m/s Operating temperature: 0 to +600 °C Pitot tube factor: 0.67 Minimum immersion depth: 150 mm 0635 2045 0635 2145 0635 2345 0635 2043 0635 2143 0635 2243 500 mm 350 mm 1000 mm 360 mm 500 mm 1000 mm Ø 7 mm Ø 7 mm Ø 7 mm Pitot tubes *Connection hose required (order no. 0554 0440) or (order no. 0554 0453) 1) According to standard EN 60584-2, the accuracy of Class 1 refers to -40 to +1000 °C (Type K), Class 2 to -40 to +1200 °C (Type K), Class 3 to -200 to +40 °C (Type K). A probe always corresponds to only one accuracy class. Thermocouple with TC adapter, flexible, 800 mm long, fibre glass, TC Type K Thermocouple with TC adapter, flexible, length 1500 mm , fibreglass, TC Type K Thermocouple with TC adapter, flexible, 1500 mm long, PTFE, TC Type K -50 to +400 °C -50 to +400 °C -50 to +250 °C Class 2 Class 2 1) Class 2 1) 5 s 5 s 5 s 0602 0644 0602 0645 0602 0646 Thermocouples 800 mm 1500 mm 1500 mm Ø 1.5 mm Ø 1.5 mm Ø 1.5 mm testo-480-P07 25.11.2014 07:30 Seite 7

Subject to change without notice. testo 480 Accessories Part no.Accessories for measuring instrument 0554 0743 0430 0100 0516 0481 0430 0946 0554 0410 0430 0101 0554 0415 0554 4172 0563 4170 0554 0660 0554 0440 0554 0453 0554 0549 0554 0568 0516 4801 0516 4800 0520 0001 0520 0211 0520 0006 0520 0206 0520 0025 0520 0005 0520 0004 0520 0034 0520 0010 0520 0033 Tripod for workplace evaluation With holders for hand-held instrument and probe. Can also be used as telescope extension Plug-in head cable for digital probes Soft case testo 480 incl. carrying strap Telescope for digital probes, with ball joint and probe bracket, length 1.8 m. Use 5 m plug-in head cable (order no. 0430 0101). testovent 410, volume flow funnel, Ø 340 mm/330x330 mm, incl. case Plug-in head cable for digital probes, length 5 m testovent 415, volume flow funnel, Ø 210 mm/210x210 mm, incl. case Flow straightener testovent 417 testovent 417 funnel set for plate outlets (Ø 200 mm) and funnel for ventilator (330 x 330 mm) for ingoing and outgoing air Control and adjustment set for Testo humidity probes, salt solution with 11.3% RH and 75.3% RH, incl. adapter for Testo humidity probes Connection hose; silicone; 5 m long; max. load 700 hPa (mbar) Connection hose silicone-free for differential pressure measurement, length 5 m, load up to maximum 700 hPa, (mbar) Testo fast printer IrDA with wireless infrared interface; 1 roll thermal paper; 4 AA batteries for printing out measurements on site Spare thermal paper for printer (6 rolls), permanent ink, measurement data documentation legible for up to 10 years System case for comfort level measurement For instrument, probes and other accessories System case for HVAC measurements, For instrument, probes and other accessories ISO calibration certificate/temperature for air/immersion probes, calibration points -18°C; 0°C; +60°C DAkkS calibration certificate/temperature; meas. instr. with air/immersion probe; calibration points -20 °C; 0 °C; +60 °C ISO calibration certificate humidity; Calibration points 11.3 %RH and 75.3 %RH at +25 °C DAkkS calibration certificate/humidity; electronic hygrometers; calibration points 11.3%RH and 75.3%RH at +25°C ISO calibration certificate pressure; accuracy 0.1 to 0.6 (% of fsv), 5 points distributed over meas. range ISO calibration certificate pressure; accuracy > 0.6 (% of fsv) ISO calibration certificate velocity; hot wire, vane anemometer, Pitot tube; calibration points 1; 2; 5; 10 m/s ISO calibration certificate velocity; hot wire, vane anemometer, Pitot tube; calibration points 5; 10; 15; 20 m/s ISO calibration certificate/light; Calibration points 0; 500; 1000; 2000; 4000 Lux ISO calibration certificate/CO 2; CO2 probes; calibration points 0; 1000; 5000 ppm More calibration certificates on request Printer and Accessories Transport and Protection Calibration Certificates We measure it. www.testo.com 0981 9184/msp/A/12.2014 testo-480-P08 22.10.2014 11:38 Seite 8