0606000UXTHP LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Electrical Characteristics for Series % of Ampere Rating Ampere Rating Opening Time 100% 40A to 63A 1 Hour, Min. 200% 40A to 63A 120 Seconds, Max.
Applications
- Uninterruptible Power Supply (UPS)
- Three-phase AC input for charging pile/ Electric Vehicle Supply Equipment (EVSE)
- Power conversion equipment such as inverters, rectifiers, etc.
- Motor protection in elevator systems
- Rated voltage @ 500VAC
- 40A to 63A rating available
- Through-hole mounting for circuit boards
- RoHS compliant, Halogen-free, and Lead- free AGENCY AGENCY FILE NUMBER AMPERE RANGE E7161 1 40A to 63A Ampere Rating (A) Amp Code Max Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (mOhms) Nominal Melting I2t (A2sec) Watts Loss at 70% Rated Current (W) Watts Loss at 100% Rated Current (W) Agency Approvals 40 040. 500Vac 2000A @ 500Vac 10KA @ 250Vac 1 .70 2500 1 .90 4.63 X 50 050. 1 .31 4800 2.34 5.65 X 63 063. 1 .06 7000 2.96 7 .30 X Electrical Specifications by Item
© 2018 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 01/30/18 High Current & Voltage Cartridge Fuse High-Current > 606 Series Average Time Current CurvesT emperature Re-rating Curve Note: 1 . Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.001 0.01 0.1 100 1000 10000 11 01 00 1000 Time in Seconds Current in Amperes 606040 606050 606063 Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These components are not recommended for IR or Convection Reflow process. Recommended Process Parameters:
© 2018 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 01/30/18 High Current & Voltage Cartridge Fuse High-Current > 606 Series Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Reel Size Tray N/A 500 UXTH N/A Part Numbering SystemPart Numbering System 0606 XXX. U X TH P SERIES AMP Code* QUANTITY Code PACKAGING Code OPTION Code P: LEAD-FREE Refer to Amp Code column of Electrical Characteristics Table U = 500 Pieces Unit in mm X = Filler TH = Through Hole Mounting Recommended Drilling Pattern 4oz (140μm) minimum Cu layer for 40A and 50A 6oz (210μm) minimum Cu layer for 63A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. Product Characteristics Operating Temperature -55ºC to +125ºC Thermal Shock MIL -STD-202, Method 107 Test condition B (5 cycles -65ºC to 125ºC) Vibration MIL -STD-202, Method 201 Moisture Resistance MIL -STD-202, Method 103 Test condition A Salt Spray MIL -STD-202, Method 101Test condition B Materials Body: Melamine Caps: Copper alloy Leads: Tin-plated copper alloy T erminal Strength MIL -STD-202, Method 211 Test condition A Solderability Reference MIL -STD-202 method 208 Product Marking Cap1: Brand logo, Current and Voltage ratings Cap2: Series and agency approval Marks 11.30 12.2533.40 24.5±0.80 25.80 11.80 23.20 19.30 .50 8.80 6.30 1.30 3.00