0604HQ COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Chip Inductors - 0604SMS Series (1610)Chip Inductors - 0604HQ Series (1610) Document 285-1 Document 285-1 Revised 10/06/08 SRF DCR Inductance2 Percent Q 900 MHz 1.7 GHz min 5 max6 Irms7 Color Part number1 (nH) tolerance 3 min 4 L typ Q typ L typ Q typ (GHz) (Ohms) (A) code 1. When ordering, please specify termination and packaging codes: 0604HQ-10NXJLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C =7 ″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. 2. Inductance measured at 500 MHz using a Coilcraft SMD-A fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 500 MHz using an Agilent/HP 4291A with an Agilent/ HP 16193 test fixture. 5. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. 9. Temperature coefficient of inductance: +25 to +125 ppm/°C. See Qualification Standards section for environmental and test data. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Designer’s Kit C351 contains 10 each of all values Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 4.6 – 5.6 g Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)+25 to +126 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 per 7″reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.27 mm pocket depth PCB washing Only pure water or alcohol recommended Combines the exceptionally high Q of an air core inductor with the rugged construction of a ceramic body component. Provides intermediate inductance values not available in Coilcraft’s 0603, 0402 or 0906 product families Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com.
© Coilcraft, Inc. 2009 0604HQ Series (1610) Specifications subject to change without notice. Please check our website for latest information. Typical Q vs Frequency Document 285-2 Revised 10/06/08 Document 285-2 Typical L vs Frequency ABCD max max max ref E F G H I J 1,85 1,37 1,19 0,64 1,02 0,33 0,86 1,35 0,63 0,63 mm 100 120 140 160 180 200 220 Q Factor 6.8 nH 4.5 nH 10.4 nH 1.1 nH 100001000100101 Frequency (MHz) A B overall F I I G DE terminal F J C H Terminal wraparound: approx 0.007/0,18 both ends Recommended Land Pattern 100001000100101 F( M H ) Inductance (nH) 1.1 nH 2.6 nH 7.6 nH 6.8 nH 5.0 nH 4.5 nH 10.4 nH requency z Irms Derating -40 -20 0 20 40 60 80 100 140 120 Ambient temperature (°C) 120 110 100 Percent of rated rms I 25°C