05S30R-MSOS3 ROSENBERGER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

50 Ω Calibration Kit Plug 05S30R-MSOS3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/05.10/6.0 All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to IEC 61169-16 Contents and Documentation This kit is delivered with

  • Standard Definitions Card Printed Standard Definitions that can be used on nearly all Vector Network Analyzers
  • Lanyard
  • Hard Shell Case Material and plating Connector parts Material Plating Center conductor CuBe Gold, min. 1.27 µm, over nickel Outer conductor Stainless steel Passivated Coupling nut Stainless steel Passivated Body Aluminum black anodized Dielectric PPE Substrate Al 2O 3

50 Ω Calibration Kit Plug 05S30R-MSOS3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/05.10/6.0 Electrical data Frequency range DC to 18 GHz Open Error from nominal phase 1 ≤ 2.0 °, DC to 6 GHz ≤ 3.0°, 6 GHz to 9 GHz ≤ 4.0°, 9 GHz to 18 GHz Short Error from nominal phase 2 ≤ 1.5 °, DC to 6 GHz ≤ 2.0°, 6 GHz to 9 GHz ≤ 2.5°, 9 GHz to 18 GHz Load Return loss ≥ 42 dB, DC to 6 GHz ≥ 36 dB, 6 GHz to 9 GHz ≥ 30 dB, 9 GHz to 18 GHz DC-Resistance 50 Ω ± 0.5 Ω Power handling ≤ 1.0 W

1 The nominal phase is defined by the Offset Delay, the Offset Loss and the Fringing Capacitances

2 The nominal phase is defined by the Offset Delay, the Offset Loss and the Short Inductance

Mating cycles ≥ 500 Maximum torque 1.70 Nm Recommended torque 1.10 Nm Gauge 5.28 mm to 5.32 mm General standard definitions For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour of this calibration standard. The different models, units, and terms used will depend on the VNA type and they will have to be entered into the VNA. All values are based on typical geometry and plating. Open Offset Z o / Impedance / Z o 50 Ω Offset Delay 73.384 ps Length (electrical) / Offset Length 22.00 mm Offset Loss 0.80 G Ω/s Loss 0.0102 dB/ GHz Fringing Capacitances C 0 = -14.2000 x 10 -15 F / -14.2000 fF C 1 = 400.000 x 10 -27 F/Hz / 0.40000 fF /GHz C 2 = -16.0000 x 10 -36 F/Hz 2 / -0.01600 fF /GHz 2 C 3 = 1.00000 x 10 -45 F/Hz 3 / 0.00100 fF /GHz 3

50 Ω Calibration Kit Plug 05S30R-MSOS3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/05.10/6.0 Short Offset Z o / Impedance / Z o 50 Ω Offset Delay 73.384 ps Length (electrical) / Offset Length 22.00 mm Offset Loss 0.80 G Ω/s Loss 0.0102 dB/ GHz Short Inductance L 0 = -27.0000 x 10 -12 H / -27.0000 pH L1 = 7200.00 x 10 -24 H/Hz / 7.20000 pH/GHz L2 = -800.000 x 10 -33 H/Hz 2 / -0.80000 pH/GHz 2 L3 = 26.0000 x 10 -42 H/Hz 3 / 0.02600 pH/GHz 3 Load Offset Z o / Impedance / Z o 50 Ω Offset Delay 0.0000 ps Length (electrical) / Offset Length 0.000 mm Offset Loss 0.00 G Ω/s Loss 0.0000 dB/ GHz Environmental data Operating temperature range 3 +20 °C to +26 °C Rated temperature range of use 4 0 °C to +50 °C Storage temperature range -40 °C to +85 °C RoHS compliant 3 Temperature range over which these specifications are valid. 4 This range is underneath and above the operating temperature range, within the calibration kit is fully functional and could be used without damage Packing Standard 1 pce in bag Weight 178 g/pce Draft Date Approved Date Rev. Engineering change number Name Date While the information has been caref ully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein s hall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.