05D UNSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

Features

Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/6 05D Series Radial Lead Varistor (MOV) Material General Characteristics Definition Part Numbering The 05D series radial leaded varistors provides an ideal circuit protection solution for lower DC voltage applications by offering higher surge ratings than ever before available in such small discs. The maximum peak surge current rating can reach up to 0.8KA (8/20 μs pulse) to protect against high peak surges, including indirect lightning strike interference, system switching transients and abnormal fast transients from the power source.  Wide operating voltages ranging from 11Vrms to 460Vrms(AC)  Fast response time of less than 25ns, instantly clamping the transient over voltage.  High surge current handling capability.  High energy absorption capability.  Low clamping voltages, providing better surge protection  Low capacitance values, providing digital switching circuitry protection.  High insulation resistance, preventing electric arching to the adjacent devices or circuits.  Transistor, Diode, IC, Thyristor or Triac semiconductor protection.  Surge protection in consumer electronics.  Surge protection in industrial electronics.  Surge protection in electronic home appliances, gas and petroleum appliances.  Relay and electromagnetic valve surge absorption.  Coating: Epoxy Resin  Lead Wire: The Copper Wire  Electrode: Silver Solder  Disk: Zinc Oxide (1) Size(mm) : 05mm to 32mm (2) Type : D: Disk, S: Square (3) Varistor Voltage :470(47*10 0=47V) , 471 47*101=470V) (4) Tolerance : K±10%, L±15%, M±20% (5) Surge Current Standardğ J:High Surge & High Energy (6) Taping Mode : TR : Reel (7) Lead Form : C:Crimped, Short leg : NO : X.X (8) Coating : H:Epoxy Coating 125℃ Note: (5)a(6)a(7)a(8) options is non-standard  Operating Temperature: -40 ℃~ +85℃  Storage Temperature: -40 ℃~ +125℃  Working Surface Temperature: +115 ℃  Insulation Resistance: > 100MΩ  Coating (Epoxy Resin): Flame-Retardant to UL 94V-0  Approval Standard and File Numberğ VDEğ40046112 CQCğ16001161414 CSA&CULğE489912 05 - D - XXX - K - X - X - X - X

Radial Lead Varistor (MOV) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Electrical Characteristics (@ 25℃Unless Otherwise Specified ) 05D180L 05D220K 05D270K 05D330K 05D390K 05D470K 05D560K 05D680K 05D820K 05D101K 05D121K 05D151K 05D181K 05D201K 05D221K 05D241K 05D271K 05D301K 05D331K 05D361K 05D391K 05D431K 05D471K 05D511K 05D561K 05D621K 05D681K 05D751K 115 130 140 150 175 190 210 230 250 275 300 320 350 385 420 460 100 125 150 170 180 200 225 250 275 300 320 350 385 415 460 505 560 615 18(15.3-20.7) 22(19.8-24.2) 27(24.3-29.7) 33(29.7-36.3) 39(35.1-42.9) 47(42.3-51.7) 56(50.4-61.6) 68(61.2-74.8) 82(73.8-90.2) 100(90-110) 120(108-132) 150(135-165) 180(162-198) 200(185-225) 220(198-242) 240(216-264) 270(243-297) 300(270-330) 330(297-363) 360(324-396) 390(351-429) 430(387-473) 470(423-517) 510(459-561) 560(504-616) 620(558-682) 680(612-748) 750(675-825) 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.6 0.7 0.9 1.1 1.2 1.5 1.8 2.2 4.0 4.1 4.9 6.5 7.5 8.5 9.0 10.5 11.0 12.0 13.0 16.0 17.0 20.0 21.0 22.5 24.0 25.0 29.0 32.0 0.4 0.5 0.6 0.8 0.9 1.1 1.3 1.6 2.5 3.0 4.0 4.1 4.9 6.5 7.5 8.0 8.5 9.0 9.5 10.0 12.0 13.0 15.0 16.0 16.5 21.0 22.0 22.4 100 100 100 100 100 100 100 100 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 125 125 125 125 125 125 125 125 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 104 123 145 150 177 210 260 320 340 380 415 475 520 570 620 675 745 810 845 920 1025 1120 1240 Part Number 05D180LJ 05D220KJ 05D270KJ 05D330KJ 05D390KJ 05D470KJ 05D560KJ 05D680KJ 05D820KJ 05D101KJ 05D121KJ 05D151KJ 05D181KJ 05D201KJ 05D221KJ 05D241KJ 05D271KJ 05D301KJ 05D331KJ 05D361KJ 05D391KJ 05D431KJ 05D471KJ 05D511KJ 05D561KJ 05D621KJ 05D681KJ 05D751KJ Maximum Allowable Voltage Rated Power Varistor Voltage V1mA (V) Withstanding Surge Current 8/20μS Max Clamping Voltage VDC (V) VAC (V) VC (V) IP (A) (W)Standard High Surge I(A) Standard I(A) High Surge (J) Standard (J) High Surge Maximum Energy (10/1000μs) time times time times 05D Series

Radial Lead Varistor (MOV) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Approval Standard And File Number Certified Model No. E489912 40046112 16001161414 05D Series 05D180L 05D220K 05D270K 05D330K 05D390K 05D470K 05D560K 05D680K 05D820K 05D101K 05D121K 05D151K 05D181K 05D201K 05D221K 05D241K 05D271K 05D301K 05D331K 05D361K 05D391K 05D431K 05D471K 05D511K 05D561K 05D621K 05D681K 05D751K 05D180LJ 05D220KJ 05D270KJ 05D330KJ 05D390KJ 05D470KJ 05D560KJ 05D680KJ 05D820KJ 05D101KJ 05D121KJ 05D151KJ 05D181KJ 05D201KJ 05D221KJ 05D241KJ 05D271KJ 05D301KJ 05D331KJ 05D361KJ 05D391KJ 05D431KJ 05D471KJ 05D511KJ 05D561KJ 05D621KJ 05D681KJ 05D751KJ YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES R C US VDE CQC

Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Radial Lead Varistor (MOV) Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.4/6 ROHS Packaging Information Part Marking Package Dimensions Unit: mm 05D Series VDE Marking Trademark Part No. Standard for Safety ——— 05D511K-05D751K No VDE 05D180L-05751K No Csa UN logo 05DXXXK/KJ UL / VDE / CQC High Surge Dimension Part No. Bag Small Carton Carton Unit:Pcs 05D 05D (Short leg) 180L to 751K 180L to 751K 1000 1000 10000 10000 20000 20000 TABLE1 Symbol H(max.) L(min.) D(max.) D1(±0.8) T(max.) d(±0.05) 10.5 20.0 7.50 5.00 TABLE2 0.60 Dimension TABLE2 Model 180L 220K 270K 330K 390K 470K 560K 680K 820K 101K 121K 151K 181K 201K 221K 241K 271K 301K 331K 361K 391K 431K 471K 511K 561K 621K 681K 751K 4.5 4.6 4.7 4.9 4.8 4.9 5.0 5.2 4.1 4.3 4.5 4.8 4.3 4.4 4.5 4.6 4.9 5.0 5.1 5.2 5.4 5.7 6.0 6.2 6.5 6.5 6.8 6.9 T(max.) Model T(max.) D T L d k≤3.0 H 05DXXXX

Radial Lead Varistor (MOV) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.5/6 Reliability Test (Mechanical Ratings) ROHS 05D Series Test Parameter Terminal Pull Strength Soldering-solder ability Soldering-Resistance to Solder Heat After preheating the specimen, the specimen shall be completely immersed into a soldering bath having a temperature of 260±5℃ for 10±1 (D5: 5±1) seconds or iron of 400±5℃ for 3±0.5 seconds. There after the change of Vb and mechanical damage shall be examined. After dipping the terminal to depth of approximately 3mmfrom the specimen in a soldering bath of 260℃ for 10±1(D5: 5±1) seconds. Thereafter the terminal shall be visually examined. The Specimen shall be vibrated by its lead wires with a total amplitude of 1.5mm and a varying frequency of10~55~10HZ(each minutes) for a period of 2 hours respectively in each X,Y and Z directions. The unit shall be secured with its terminal kept vertical and the weight specified below be applied in the axial direction. The terminal shall gradually be bent by 90° in one direction, then 90° in the opposite direction, and again back to the original position. The damage of the terminal shall be visually examined. After gradually applying the load specified below and keeping the unit fixed for ten seconds, the terminal shall be visually examined for any damage No visible damage No visible damage Terminations shall be uniformly tinned No visible damage ¶VB/VB%⛄±5% No visible damage ¶VB/VB%⛄±5% Terminal Bending Strength Vibration Test Condition / Description Performance Requirements Diameter 0.6mm 0.8mm 1.0mm Diameter 0.6mm 0.8mm 1.0mm Loading 1.0 Kg 1.0 Kg 2.0 Kg Loading 0.5 Kg 0.5 Kg 1.0 Kg

Radial Lead Varistor (MOV) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.6/6 Reliability Test (ENVIRONMENTAL RATINGS) ROHS 05D Series Test Parameter Dry Heat Loading Temperature Cycle Surge Lifetime Rating Voltage Proof The change of Vb shall be measured after the impulse listed below is applied 10,000 times continuously with the interval of ten seconds at room temperature.Vb and mechanical damage shall be examined. Voltageğ2500VAC Leakage Current⛄0.5mA Timeğ60 Seconds Condition the specimen to each temperature form step 1 to step 4 in this order for the period shown in the table of specifications. The change of Vb and mechanical damage shall be examined after 2 hours. The Specimen shall be vibrated by its lead wires with a total amplitude of 1.5mm and a varying frequency of 10~55~10HZ(each minutes) for a period of 2 hours respectively in each X,Y and Z directions. In a drying oven without load. Ambient tempğ125±2℃ ; periodğ1000±24hours The specimen shall be applied continuously the maximum allowable voltage at the specified conditions for specified period and then stored at room temperature and normal humidity over 2 hours. Thereafter, the change of Vb and mechanical damage shall be examined.Ambient tempğ125±2℃ ; Periodğ1000±24hours ¶VB/VB%⛄±5% ¶VB/VB%⛄±10% ¶VB/VB%⛄±10% No visible damage ¶VB/VB%⛄±10% No Breakdown No visible damage ¶VB/VB%⛄±10% High Temperature Storage Damp Heat Loading Test Condition / Description Performance Requirements Step Temp℃ 40+3℃ Room Temp 85+2℃ Room Temp Period 30 min. 15 min. 30 min. 15 min.

Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.