0560-6600-N6 BEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ADSL Magnetics ©2001 Bel Fuse Inc. Specifications subject to change without notice. 06.01 TM01342 page 1 Lucent SCHEMATIC ELECTRICAL SPECIFICATIONS at 25°C 0560-6600-N6
- Designed to comply with the requirements of UL1950 and EN60950 to provide a supplementary insulation barrier with a working voltage of 250V
- UL File Number E150991
- Minimum interwinding breakdown voltage of 1500 Vrms
- Operating and storage temperature range: -40° to +85°C
- Meets IEC 695, 2-2 flammability requirements
- PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning
- Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias All measurements are made with pins 2 and 3 connected and pins 6 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Leakage inductance measured at 100 kHz, 0.1 Vac 3. Interwinding capacitance measured at 1 kHz, 1 Vac 4. Measurements made with 100Ω source and 25Ω load impedance rebmuNtraP oitaRsnruT %2± ecnatcudnI 1 %5±Hµ egakaeL ecnatcudnI 2 µx amH RCD ΩΩΩΩΩ xam gnidniwretnI ecnaticapaC 3 xamFp lanidutignoL ecnalaB 4 nimBd noitresnI ssoL 4 xamBd ycneuqerF esnopseR 4 xamBd cinomraH noitrotsiD 4 xamBd eniL:pihC ediSeniL ediSeniL pihC ediS eniL ediS -zHk03 zHM1.1 zHk003 -zHk03 zHM1.1 zHk001 smrV2 6N-0066-06502 :15 220 17 .21 .30 55 51 5 .00 8- Chip Line
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com ADSL Magnetics ©2001 Bel Fuse Inc. Specifications subject to change without notice. 06.01 TM01342 page 2 Lucent MECHANICAL 0560-6600-N6 Dimensions are in inches (millimeters). Standard dimension tolerance is ±0.005 (0.13) unless otherwise noted. 0.440 (11.18) max 0.480 (12.19) max 0.460 (11.68) max 0.134 ±0.010 (3.40 ±0.25) 0.098 (2.50) 0.295 (7.50) 0.020 (0.51) Sq. typ