050155

044059 BENNING | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Testing, Measuring and Safety Instruments The whole range of testers from one supplier W o r l d C l a s s T e s t E q u i p m e n t

B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t DUSPOL ® DUSPOL ® DUSPOL ® DUSPOL ® DUSPOL ® DUSPOL ® digital plus analog plus expert master combi compact indication LCD digital plunger system/LED LED/LCD LED/LCD LED/LCD LED indication steps 1.5 - 750 V 12 - 690 V 12 - 690 V 12 - 690 V 12 - 690 V 12 - 690 V continuity –– buzzer + LED – LCD –test 108 kΩ 600 kΩ phase-sequence test yes/LCD yes/LCD yes/LCD yes/LCD –– single-pole phase test yes/LCD yes/LCD yes/LCD yes/LCD yes/LCD – polarity test yes/LCD yes/LED yes/LED yes/LED yes/LED yes/LED load connection IS = 200 mA I S = 250 mA I S = 200 mA I S = 200 mA I S = 200 mA I S = 200 mA via push buttons (750 VDC) (750 V DC) (750 V DC) (750 V DC) (750 V DC) (750 V DC) 30 mA FI triggering yes yes yes yes yes yesvia push button vibrating alarm yes yes yes yes yes – measuring point illuminationyes/LED – yes/LED ––– protection class IP 64 IP 64 IP 64 IP 64 IP 64 IP 64 item no. 050255 050257 050253 050252 050254 050251

• phase-sequence indication with arrows „ , “
• safe single-pole phase test
• precise illumination of the measuring point
• shock-resistant, dust-proof and splash-proof housing (pro- tection class IP 64)
• LC display illumination that is activated automatically by means of a light sensor Top-class test equipment DUSPOL ® voltage testers
• tested and approved according to the international standard IEC/EN 61243-3 (DIN VDE 0682-401), voltage class B
• vibrating alarm for safe voltage detection
• no measuring errors due to irritating capacitive and inducti- ve voltages by means of intended load connection via push buttons
• intended release of a 30 mA FI safety switch
• acoustic continuity check via buzzer and LED/LCD measuring point illumination storage of the testing result LC display with background lighting single-pole phase test: „R“ symbol for AC voltage voltage indication 12 - 690 V AC/750 V DC, full operative even without batteries load connection via push buttons vibrating alarm for safe voltage detection shock-resistant, dust-proof and splash- proof housing (protection class IP 64) polarity test (+/-) with DC voltage acoustic and optical continuity test phase-sequence test Voltage and Continuity Tester Top-class test equipment DUSPOL ® expert, the measure of all things CAT IV 500 V tested and approved IEC/EN 61243-3 (DIN VDE 0682-401) voltage class B

B E N N I N G W o r l d C l a s s T e s t E q u i p m e n tBENNING MM 1, MM 2, MM 3 and MM 4 Digital MultimNter Technology that inspires, Quality that convincesMillion fold proven as well as tested and approved by theindependent VDE Test and Certification Institute according tocurrent international standards.• basic measuring for current, voltage, resistance, continuity,diode, capacity and frequency• automatic and/or manual measuring range selection• safe current measuring up to 300 A AC via attachable cur-rent clamp adapter (MM 4 )B E N N I N G B E N N I N G B E N N I N G B E N N I N G B E N N I N G B E N N I N G B E N N I N G M M P 3 M M 1 - 1 M M 1 - 2 M M 1 - 3 M M 1 M M 2 M M 3 indicating range 5000 2000 2000 2000 3200 2000 2000 basic accuracy AC voltage DC voltage AC current 1 mA - 10 A 1 mA - 10 A – 0.1 µA - 20 A 0.1 µA - 20 A DC current 1 mA - 10 A 1 mA - 10 A 0.1 µA - 3.2 mA 0.1 µA - 20 A 0.1 µA - 20 A resistance continuity/diode yes/yes yes/yes yes/yes yes/yes yes/yes yes/yes yes/yes frequency 1 mHz - 5 MHz – 1 Hz - 20 MHz 1 Hz - 20 MHz

1 Hz - 200 kHz

10 pF - 100 µF – 1 pF - 2 mF 1 pF - 2 mF 1 pF - 200 µF temperature ––– -20 °C up to +800 °C ––– volt sensor yes yes yes ––– interface software memory HOLD HOLD HOLD, MAX/MIN HOLD, MAX/MIN HOLD Data Log function RMS RMS RMS RMS RMS RMS RMS measuring category CAT III 300 V CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 V CAT III 300 V item no. 044084 044081 044082 044083 044027 044028 044029 Digital Multimetertested and approved IEC/EN 61010-1 (DIN VDE 0411-1) MM 1 MM 4 Digital Multimeter BENNING MM P3, MM 1-1 – MM 1-3, MM 1 – MM 4 reliable and precise in each and every situation volt sensorMM 2 MM 3 MM 1-1 MM 1-2 MM 1-3volt sensor volt sensor BENNING MM 1-1, MM 1-2 and MM 1-3 Digital Multimeters with Volt Sensor Function• the integrated Volt sensor signalises phase voltages bymeans of an acoustic signal and a red LED signal• it localizes cable breaks and defective lamps in exposedcables (cable reel, light chains) via the feeding side of thephaseBENNING MM P3 Pocket-Size Digital Multimeter • top-class functionality and design • even smaller and narrower with lower weight (only 130 g) • minimum dimensions: 132 x 86 x 19 mm • for all-purpose use with leather case and measuring leads MM P3 NEW!

B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t All Digital Multimeters including protective case, safety leads and battery set. TRUE RMS CAT IV 600 VCAT IV 600 V TRUE RMS TRUE RMS CAT IV 600 V USB BENNING BENNING BENNING BENNING BENNING BENNING MM 4 MM 7 MM 8 MM 9 MM 10 MM 11 indicating range 4200 4000 6000 6000 6000 20000 AC voltage 1 mV - 600 V 1 mV - 750 V 0.1 mV - 750 V 0.1 mV - 750 V 0.1 mV - 750 V 1 µV - 750 V DC voltage 1 mV - 600 V 0.1 mV - 1000 V 0.1 mV - 1000 V 0.1 mV - 1000 V 0.1 mV - 1000 V 1 µV - 1000 V AC current 0.1 A - 300 A 10 µA - 10 A – 1 mA - 10 A 1 mA - 10 A 1 µA - 10 A DC current – 10 µA - 10 A 0.1 µA - 6 mA 0.1 µA - 10 A 0.1 µA - 10 A 1 µA - 10 A continuity/diode yes/yes yes/yes yes/yes yes/yes yes/yes yes/yes frequency – 1 Hz - 40 MHz 1 Hz - 60 MHz 1 Hz - 60 MHz 1 Hz - 60 MHz 0.01 Hz - 1 MHz capacity – 1 pF - 40 mF 1 pF - 6 mF 1 pF - 6 mF 1 pF - 6 mF 1 pF - 40 mF temperature – -20 °C up to +800 °C ––– -200 °C up to +1200 °C interface –––– USB USB software –––– PC-Win MM 10 PC-Win MM 11 memory HOLD HOLD, MAX/MIN HOLD, MAX/MIN HOLD, MAX/MIN HOLD, MAX/MIN 1000 memory locations Data Log function ––––– 40000 memory locations measuring method RMS TRUE RMS RMS TRUE RMS TRUE RMS TRUE RMS measuring category CAT III 300 V CAT III 600 V CAT IV 600 V CAT IV 600 V CAT IV 600 V CAT III 600 V item no. 044073 044076 044077 044078 044079 044080 Digital Multimeter MM 11 USB MM 8 MM 9 MM 10 BENNING MM 7 Digital Multimeter for precise and reproducible measuring results

• TRUE RMS measuring method for industrial applications
• reliable and precise measuring results even in case of dis- torted or non-sinusoidal signal behaviour
• basic measurings for current, voltage, resistance, continui- ty, diode, capacity, frequency and temperature
• LC display with analog bar graph indication with back illu- mination BENNING MM 8, MM 9, MM 10 Digital Multimeter of the highest measuring category CAT IV
• highest measuring category CAT IV 600 V allows measure- ments direct at the source of the low-voltage installation
• precise due to TRUE RMS measuring method
• transmitting measuring results via optical USB interface
• delivery including software BENNING PC-Win MM 10 BENNING MM 11 Precision Digital Multimeter with extraordinary features of performance
• highest measuring accuracy of 0.06 % due to TRUE RMS measuring method and 20000 digit resolution
• an ideal measuring device for recording of measuring pro- cesses
• large memory capacity of 1000 storage locations and 40000 storage locations for Data Log functions
• transmitting measuring results via optical USB interface
• delivery including software BENNING PC-Win MM 11 Digital Multimeter BENNING MM 7 – MM 11 safety and functional diversity without any compromises MM 7 TRUE RMS Software PC-Win MM 10/MM 11 BENNING PC-Win MM 10/MM 11 Software for logging and analysis
• software for reading and logging of measurement series visualisation of measurement series via line diagram and table
• scanning rate variable from 0.5 sec. up to 10 min.
• storage of measurement series as text file tested and approved IEC/EN 61010-1 (DIN VDE 0411-1)

Current Clamp Adapter for Multimeter

• safeACcurrentmeasuringupto200 A/400A
• connectionvia4mmsafetymeasuringleads
• output:1mVAC/1AAC(CC 1 ),1mAAC/1AAC(CC 2 ) CM 1-3 CM 1-2 CM 1-1 voltsensor CM 2 CM 3 CC 2CC 1 B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t BENNING CM 1-1, CM 1-2and CM 1-3 Digital Current Clamp Multimeter for AC current Innovative technology, practical design
• safecurrentmeasuringupto400AAC
• measuring inputs for voltage, resistance, continuity and diodetest
• integratedvoltsensorsignalisesphasevoltagesbymeans ofanacousticsignalandaredLEDsignal(CM 1-3 )
• itlocalizescablebreaksanddefectivelampsinexposed cables(cablereel,lightchains)viathefeedingsideofthe phase(CM 1-3 ) BENNING CM 2 and CM 3 Digital Current Clamp Multimeter for AC/ DC current
• safeandnon-contactmeasuringofhighcurrents
• DCandACcurrentmeasuringupto600AAC/DC
• measurementoflowcurrents(automotive,photovoltaics, industry)(CM2)
• measuring inputs for voltage, resistance and continuity test(CM 2 ) BENNING BENNING BENNING BENNING BENNING BENNING BENNING CC 1 CC 2 CM 1-1 CM 1-2 CM 1-3 CM 2 CM 3 indicating range –– 2000 2000 2000 4000 2000 basic accuracy 1.9% 1%-3% 2% 1% 1% 0.5% 1.9% AC voltage ––– 0.1V-600V 0.1V-750V 0.1mV-600V – DC voltage ––– 0.1V-600V 0.1V-1000V 0.1mV-600V – AC current 1A-400A 0.5A-200A 10mA-400A 0.1A-400A 0.1A-200A 10mA-300A 0.1A-600A DC current ––––– 10mA-300A 0.1A-600A resistance ––– 0.1Ω-20MΩ 0.1Ω-20MΩ 0.1Ω-40MΩ – continuity/diode –/– –/– –/– yes/– yes/yes yes/– –/– memory –– HOLD,MAX HOLD HOLD HOLD,MAX HOLD measuring method –– RMS RMS RMS RMS RMS max. clamp opening 30mm 21mm 30mm 30mm 16mm 25mm 38mm measuring category CATIII300V CATIII600V CATIII600V CATIII600V CATIV600V CATIII300V CATIII300V item no. 044037 044110 044061 044062 044063 044035 044031 Digital Current Clamp Multimeter/Current Clamp Adapter Digital Current Clamp Multimeter BENNING CM 1-1 – CM 1-3, CM 2, CM 3, CC 1, CC2 tested and approved IEC/EN 61010-1 (DIN VDE 0411-1) Our best seller!

NEW! B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t BENNING CM 4 - CM 7 Digital Current Clamp Multimeter of the highest measuring category Safety without any compromises

• multi-functionalandpowerfulduetoTRUERMSmeasuring methodforindustrialapplications
• safecurrentmeasuringupto1000AAC/DC
• highestmeasuringcategoryCATIV600Vallowsmeasure- mentsdirectlyatthesourceofthelow-voltageinstallation
• LCdisplayandbackgroundilluminationforalltypes All Digital Current Clamps Including protective case, Safety measuring leads and battery set. TRUERMS CATIV600V CATIV600V TRUERMS BENNING BENNING BENNING BENNING BENNING BENNING CM 4 CM 5 CM 6 CM 7 CM 8 CM 9 indicating range 4000 4000 4000 4000 6000 6000 AC voltage 0.1V-600V 0.1V-600V 0.1V-750V 0.1V-750V 10mV-1000V – DC voltage 0.1V-600V 0.1V-600V 0.1V-1000V 0.1V-1000V 10mV-1000V – DC current – 0.1A-600A – 0.1A-1000A 0.1A-600A – continuity/diode yes/– yes/– yes/– yes/– yes/yes –/– frequency 1Hz-400Hz 1Hz-400Hz 1Hz-400Hz 1Hz-400Hz 0.1Hz-400Hz – effective power –––– 1W-600kW – power factor (cos/phitwo) –––– ±0.00-1.00 – temperature –––– -50°Cupto+1000°C – memory HOLD,MAX/MIN HOLD,MAX/MIN HOLD,MAX/MIN HOLD,MAX/MIN HOLD,MAX/MIN HOLD,PEAK PEAK PEAK,ZERO PEAK PEAK,ZERO PEAK,INRUSH analogueoutput measuring method RMS TRUERMS RMS TRUERMS TRUERMS RMS max. clamp opening 37mm 45mm 53mm 53mm 40mm 40mm measuring category CATIII600V CATIII600V CATIV600V CATIV600V CATIII600V CATIII600V item no. 044056 044057 044058 044059 044064 044065 Digital Current Clamp Multimeter CM 4 CM 5 CM 6 CM 7 Digital Current Clamp Multimeter BENNING CM 4 – CM 9 TRUERMS CM 8 BENNING CM 8 Power Current-Clamp Multimeter Power analysis for single-phase and three-phase mains
• TRUE-RMSmeasurementsupto1000V,600AAC/DC
• effectivepowermeasurementsupto600kW
• calculationofthepowerfactorcos /phitwo
• indicationoftheloadtype(inductive,capacitive)
• bipolarphasesequencetestinthree-phasemains measuringinputsforvoltage,resistance,continuity,diode, frequencyandtemperature
• measurementofinrushcurrents(motorsetc.) CM 9 (availableasof07/2008) BENNING CM 9 Leakage Current Clamp with a Resolution of 1 µA The alternative solution for insulation measurements
• measurementofleakagecurrentsanddifferentialcurrents in electrical systems (VDE 0100) and devices (VDE 0701/0702, BGV A3, BetrSichV ( = German Health and SafetyatWorkRegulations))
• highestresolutionof1µAinthe6mAmeasuringrange
• measurementwithoutswitch-offduringnormaloperation ofthesystem/device,theperfectsolutionforpreventive maintenance
• analogoutput(mV/A)fortransmissionofmeasuredvalues
• preciseandreproduciblemeasuringresultsupto100A
• optimumscreeningagainstexternalmagneticfields tested and approved IEC/EN 61010-1 (DIN VDE 0411-1)

BENNING IT 110, BENNING IT 120 Installation Testers For safety tests on electrical systems according to DIN VDE 0100 and IEC 60364 Multifunctional installation testers for complete testing and efficient troubleshooting of electrical systems

• measurement of the protective conductor line and of the equipotential bonding line with a testing current of 200 mA
• measurement of the insulation resistance with testing volt- ages of 100 V, 250 V, 500 V and 1000 V
• line impedance and loop impedance measurement (optional without tripping of the RCD) with calculation of the short- circuit current (PFC/ PSC)
• complete testing of the residual-current-operated device (RCD)
• measurement of contact voltage (without tripping), tripping time and tripping current (ramp test) of residual current operated device (RCD)
• phase-sequence testing in three-phase mains
• voltage measurement up to 500 V and online voltage moni- toring Safety Instruments BENNING IT 100, IT 110 and IT 120 Testing of electrical systems in compliance with the standards BENNING IT 100 Insulation and Resistance Measuring Device
• safety tests on electric systems and equipment
• measuring of the insulation resistance with testing voltages of 250 V, 500 V and 1000 V
• low-impedance measurements with testing current of 200 mA for continuity tests of protective conductors and equipotential bonding conductors
• measuring of the residual battery capacity in %
• large LC display with analogous bar graph indication and background illumination
• including service case, measuring leads, crocodile clips and battery set BENNING IT 100 indicating range 2000 digits (illumination) low-impedance resistance 0.01 Ω - 20 Ω insulation resistance 10 kΩ - 2000 MΩ AC/DC voltage 1 V - 1000 V resistance 1 Ω - 2000 Ω continuity test buzzer/30 Ω internal battery capacity 0 - 100 % measuring category CAT III 600 V item no. 044032 BENNING IT 100 Insulation/Resistance Measuring Device IT 100 IT 110 BENNING IT 110 display graphic display (illuminated) low-impedance resistance 0.01 Ω - 2000 Ω insulation resistance 1 kΩ - 1000 MΩ line impedance (L-N/L) 0.01 Ω - 2000 Ω loop impedance (L-PE) 0.01 Ω - 2000 Ω short-circuit current 0.01 A - 24.4 kA RCD testing tripping time, tripping current, contact voltage phase sequence yes voltage, frequency 1 V - 500 V, 45 Hz - 65 Hz item no. 044100 BENNING IT 110 Installation Tester B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t

Features

BENNING IT 110, BENNING IT 120

• all measuring functions can be selected directly by means of a rotary switch
• switchable probe tip for releasing the measuring process
• graphic display and help function with connecting diagram
• complete measuring result with measuring parameters, limiting value and symbols for PASS / FAIL
• current supply by means of 6 NiMH storage batteries (AA) with charger Additional functions BENNING IT 120 in addition to the BENNING IT 110:
• current measurement (TRUE RMS) by means of current clamp adapter (optional)
• illumination measurement by means of lux sensor (optional)
• earthing measurement by means of three-wire measuring method (optionally with earthing set)
• integrated measured value memory for 500 measurements
• USB and RS 232 interface
• BENNING PC-Win IT 120software included in delivery Logging software with Test Log according to ZVEH BENNING PC-Win IT 120
• PC software for reading the stored test data
• Creation of test logs with handover and status report according to ZVEH
• Structuring and export function of the test data IT 120 BENNING IT 120 display graphic display (illuminated) low-impedance measurement 0.01 Ω - 2000 Ω insulation resistance 1 kΩ - 1000 MΩ line impedance (L-N/L) 0.01 Ω - 2000 Ω loop impedance (L-PE) 0.01 Ω - 2000 Ω short-circuit current 0.01 A - 24.4 kA RCD testing tripping time, tripping current, contact voltage phase sequence yes voltage, frequency 1 V - 500 V, 45 Hz - 65 Hz earth resistance 0.01 Ω - 2000 Ω current (TRUE RMS) 0.1 mA - 20 A (by means of the clamp) luminous intensity 0.01 lux - 20 klux (by means of sensor) measured value memory 500 measuring results interfaces USB, RS 232 incl. software BENNING PC-Win IT 120 item no. 044101 BENNING BENNING IT 110 IT 120 tester incl. carrying case / carrying strapxx switchable probe tip xx test cable with shock-proof plug xx universal test cable, 3 x L = 1.5 m xx 3 x test probe, 3 x crocodile clips xx charger with 6 NiMH storage batteries (AA)xx PC software BENNING PC-Win IT 120 x USB and RS 232 cable x Optional accessories for BENNING IT 120 Current clamp adapter BENNING CC 2 0.5 A - 20 A AC (200 A AC) item no. 044110 Illumination sensor BENNING luxmeter type B Accuracy: 5 % item no. 044111 Illumination sensor BENNING luxmeter type C Accuracy: 10 % item no. 044112 Earthing set consisting of 2 earth rods and 3 test cables item no. 044113 BENNING IT 120 Installation Testers Scope of delivery of the installation testers BENNING IT 110, IT 120 Installation Testers The perfect solution for efficient testing BENNING luxmeter type B/type C BENNING CC 2 B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t Scope of delivery of the BENNING IT 120 NEW! Test log accordingto ZVEH Earthing set

Features of theBENNING 700

• standard equipment with measured value memory for 199 test samples, PC interface, connection for barcode scanner and optional software BENNING PC-Win 700
• indication of the respective testing steps by means of LED and indication of measured values and limiting values via LC display
• „PASS“/„FAIL“ indication by means of red error LED
• appropriate for electrotechnically trained personnel test sample identification via barcode scanner / barcode labels BENNING PC-Win 700Software
• professional software for logging, evaluation and archiving of the recorded measured values
• comfortable transmission of the test data to the BENNING 700 tester BENNING 700 Set
• tester BENNING 700 incl. service bag item no. 050305
• software BENNING PC-Win 700 on CD-ROM item no. 047000
• barcode scanner item no. 009369
• barcode labels (320 pieces) item no. 756061
• test badges „Next test“ (300 pieces) item no. 756213 BENNING 700 Tester according to VDE 0701/0702 For testing portable electrical equipment BENNING 700 Tester for safety tests and repetitive tests according to DIN VDE 0701/0702 and UVV BGV A3, BetrSichV (German Health and Safety at Work Regulations)
• DIN VDE 0701: tests on repaired and modified electric devices
• DIN VDE 0702: repetitive tests on electric devices Test routines either in automatic or manual mode
• measurement of protective-conductor resistance with test current 200 mA/10 A
• measurement of insulation resistance
• measurement of protective-conductor current and contact- current using differential current process
• measurement of substitute earth leakage test
• test of voltage absence by measuring differential current
• function test after safety test passed (voltage, current) Next test BENNING 700 indicating range 99999 protective conductor resistance 0.01 Ω - 65.53 Ω insulation resistance 1 kΩ - 65.53 MΩ measurement of protective conductor current, contact current 0.01 mA - 65.00 mA (differential current) and substitute leakage current zero potential test (differential current method) 0.01 mA - 65.00 mA functional test after test sample passed the safety test by means of 230 V, 16 A separately placed test socket and mains socket measured value memory 199 test samples interfaces RS 232, barcode scanner item no. 050305 BENNING 700 VDE 0701/0702 Tester B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t Optional accessories for BENNING 700 software BENNING PC-Win 700 on CD-Rom item no. 047000 barcode scanner item no. 009369 barcode labels (1 set/320 pieces) item no. 756061 test badges „Next test“ (1 set/300 pieces) item no. 756213 Leakage current clamp BENNING CM 9 for leakage current measurement (see page 7) item no. 044065 Measuring adapter for three-phase loads: Measuring adapter for R PE and RISO measurement, CEE coupling (5-pin, L1-L2-L3 bridged) onto shock-proof plug (2-pin), 16 A CEE coupling item no. 044122 32 A CEE coupling item no. 044123 Measuring adapter for leakage current clamp, CEE coupling onto CEE plug (5-pin), conductors leaded through individually and double insulated 16 A CEE coupling item no. 044127 32 A CEE coupling item no. 044128 Scope of delivery of theBENNING 700
• BENNING 700 tester incl. Service case
• 4 mm safety measuring line and probe tip BENNING 700 BENNING 700 info CD BENNING 700 set offer Te s t p a s s e d / O K Test record for electrical devices VDE 0701/0702, BGV A3 drill machine Test object Paus Customer workshop Device department 10015 ID 285500 Order number 463700RCC BENNING 700 Checking device Inspection Test reason Repetition test Case ok Other mechanical parts ok Connecting cables and plugs ok Test from 14.05 .2007 Test Earth continuity test [Ohm] Earth continuity test (reversed polarity) [Ohm] Earth bond test (10A) [Ohm] Insulation test [MOhm] Earth leakage test [mA] Earth leakage test for information technology [mA] Earth leakage test for information technology (reversed polarity) [mA] Test passed Remarks Limit value 3,5 Measuremen t value 0,7 Test ok Yes Yes Yes Next test19.11.2007 Group 7 Device group half-yearly Test interval Baumeister Tester Signature Place, date Bocholt, 14.05.2007 Baumeister CM 9 (available as of 07/2008) NEW!

BENNING Elektrotechnik und Elektronik GmbH & Co.KG Münsterstraße 135-137 • D-46397 Bocholt www.benning.de • E-Mail: duspol@benning.de TRITEST® control DUTEST ® PROFIPOL® Z-TESTER B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t PROFIPOL ® Universal voltage tester

• indicating DC and AC voltage within the range of 6 - 400 V
• indicating steps 6, 12, 50, 230, 400 V
• polarity test for DC voltage
• shock-resistant, dust-proof and splash- proof housing, protection class IP 65 Z-TESTER Load tester for testing low-voltage meters
• testing of the meter starting capability
• functional control by power connection of

50 W/100 W

• control of phase voltages (230/400 V)
• overload protection by means of integrated temperature monitoring TRITEST ® control Phase-sequence indicator for testing the phase sequence in three-phase mains
• indication of clockwise and anti-clockwise phase sequence
• indication of the phase voltages L1, L2 and L3
• voltage range: 400 - 690 V (50 - 60 Hz)
• bright LED pocket lamp function including safety probe tips and alligator clip DUTEST ® Continuity and line tester
• reliable detection of faulty wiring, contacting errors and cable interruptions
• high- and low-impedance continuity tests
• acoustic indication by means of loud testing buzzer
• visual indication by means of high-contrast light-emitting diodes (LED)
• powerful torch function
• protected against external voltages of up to 400 V PROFIPOL® DUTEST ® Z-TESTER TRITEST ® continuity testerload tester control indication LED LED LED LED AC voltage 6 - 400 V – 230/400 V 400 - 690 V DC voltage 6 - 400 V – – – continuity – buzzer + LED ––test 900 Ω/90 kΩ Phase-sequence – – – yes/LEDtest Phase voltage – – – yes/LEDindication Pocket lamp – yes/bulb – yes/white LED function polarity test yes/LED – – – load connection –– 50 W/100 W –via push button IS = 270/470 mA protection class IP 65 IP 30 IP 20 IP 30 item no. 020022 050155 050190 020050 Your specialist dealer Voltage, Continuity, Load Tester and Phase-Sequence Indicator 784331.23 GB 04/2008 paus Design & Medien, Bocholt Subject to technical changes. Printed on non-chlorine bleached paper. Voltage, Continuity, Load Tester Phase-Sequence Indicator tested and approved IEC/EN 61243-3 (DIN VDE 0682-401) tested and approved IEC/EN 61010-1 (DIN VDE 0411-1)